Skip to main content
The search returned 9 results
Now showing 1 - 9 of 9
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Birth of an ocean in the Red Sea: Initial pangs

    We obtained areal variations of crustal thickness, magnetic intensity, and degree of melting of the sub- axial upwelling mantle at Thetis and Nereus Deeps, the two northernmost axial segments of initial oceanic crustal accretion in the Red Sea, where Arabia is separating from Africa. The initial emplacement of oceanic crust occurred at South Thetis and Central Nereus roughly $2.2 and $2 Ma, respectively, and is taking place today in the northern Thetis and southern Nereus tips. Basaltic glasses major and trace element com- position suggests a rift-to-drift transition marked by magmatic activity with typical MORB signature, with no contamination by continental lithosphere, but with slight differences in mantle source composition and/or potential temperature between Thetis and Nereus. Eruption rate, spreading rate, magnetic intensity, crustal thickness and degree of mantle melting were highest at both Thetis and Nereus in the very initial phases of oceanic crust accretion, immediately after continental breakup, probably due to fast mantle upwelling enhanced by an initially strong horizontal thermal gradient. This is consistent with a rift model where the lower continental lithosphere has been replaced by upwelling asthenosphere before continental rupturing, implying depth-dependent extension due to decoupling between the upper and lower lithosphere with man- tle-lithosphere-necking breakup before crustal-necking breakup. Independent along-axis centers of upwell- ing form at the rifting stage just before oceanic crust accretion, with buoyancy-driven convection within a hot, low viscosity asthenosphere. Each initial axial cell taps a different asthenospheric source and serves as nucleus for axial propagation of oceanic accretion, resulting in linear segments of spreading.
      611  2339
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Pleistocene magnetochronology of early hominin sites at Ceprano and Fontana Ranuccio, Italy

    (2009) ; ; ;
    Swisher, C. C.
    ;
    Paleomagnetic analyses were conducted on two cores drilled at Ceprano in central Italy where an incomplete hominin cranium was discovered in1994, as well as on two additional cores from the nearby site of Fontana Ranuccio that yielded hominin remains associated with an Acheulean industry. No evidence for the 0.78 Ma Brunhes–Matuyama boundary was found at Ceprano down to 45 m below the level that yielded the hominin cranium. The Ceprano lithostratigraphy and the paleomagnetic age constraints are broadly consistent with the stratigraphy of the Liri lacustrine sequence of the Latina Valley, constrained by published K–Ar ages between ~0.6 and ~0.35Ma, and according to an age model with magnetic susceptibility supported by pollen facies data, suggest that the level that yielded the hominin cranium has an age of ~0.45 (+0.05, −0.10) Ma. Evidence for the Brunhes–Matuyama boundary was found at Fontana Ranuccio about 40 m below the hominin level, consistent with a K–Ar age of ~0.46 Ma reported for this level. Hence the Ceprano and Fontana Ranuccio hominin occurrences may be of very similar mid-Brunhes age.
      471  70
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Soil gas survey in Valentano area (volcanic district of Vulsini Mounts, Central Italy): study of high natural emissions.

    (2008-08-17) ; ; ;
    Sciarra, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    ;
    Voltattorni, N.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    The Valentano area is located in the volcanic district of Vulsini Mounts, in the northern part of the Latium region (Central Italy). Geometry and shallow distribution of gas anomalies together with geophysical data on deep structural elements and anomalous geothermal gradient, confirm the presence of gas fluxes from a geothermal reservoir. The Valentano area is characterized by widespread natural emission phenomena, hazardous to human and animal health (many animals deaths have been recorded). A soil gas survey has been carried out in this area with the aim to understand the spatial distribution of the gaseous species and so the location of the main pathways (faults and fractures) causing the gas uprising. A detailed survey has been carried out at NW of Valentano town, where gas vent phenomena are characterised by high CO2 and CH4 concentrations. In this area, 75 soil gas samples (60 samples/km) have been collected. Data have been treated statistically (by normal probability plots), and by contour maps. CO2 and CH4 concentrations show maximum values up to 100% and 1000ppm respectively, detected over the highest emission points. CO2 and CH4 contour maps show high anomalous concentrations in the central and in the southern sector of the studied area and distributions have a spot geometry. Highest Rn concentrations (> 100Bq/L) show a good spatial continuity in N-S direction overlapping the CO2 and CH4 highest values only in the central part of the anomaly. He concentrations show anomalous values only in the southern sector. The good correlation of the gas concentrations allow us to infer that the geochemical anomalous areas and the deep geothermic reservoir are strictly related. Besides, the good association between Rn and CO2 distributions confirms the CO2 carrier gas role for trace elements. Since this study has been partially funded by local authorities for the gas risk assessment, radon hazard map has been elaborated in order to highlight the risk areas for the human and animal health.
      166  212
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Measurements of low amounts of precipitable water vapor by millimeter wave spectroscopy: An intercomparison with radiosonde, Raman lidar, and Fourier transform infrared data

    Observations of very low amounts of precipitable water vapor (PWV) by means of the Ground-Based Millimeter wave Spectrometer (GBMS) are discussed. Low amounts of column water vapor (between 0.5 and 4 mm) are typical of high mountain sites and polar regions, especially during winter, and are difficult to measure accurately because of the lack of sensitivity of conventional instruments to such low PWV contents. The technique used involves the measurement of atmospheric opacity in the range between 230 and 280 GHz with a spectral resolution of 4 GHz, followed by the conversion to precipitable water vapor using a linear relationship. We present the intercomparison of this data set with simultaneous PWV observations obtained with Vaisala RS92k radiosondes, a Raman lidar, and an IR Fourier transform spectrometer. These sets of measurements were carried out during the primary field campaign of the Earth Cooling by Water vapor Radiation (ECOWAR) project which took place at Breuil-Cervinia (45.9N, 7.6E, elevation 1990 m) and Plateau Rosa (45.9N, 7.7E, elevation 3490 m), Italy, from 3 to 16 March 2007. GBMS PWV measurements show a good agreement with the other three data sets exhibiting a mean difference between observations of 9%. The considerable number of data points available for the GBMS versus lidar PWV correlation allows an additional analysis which indicates negligible systematic differences between the two data sets.
      280  30
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    WEIRD – Real Use Cases and Applications for the WiMAX Technology

    IEEE 802.16/WiMAX is one of the most promising technologies for Broadband Wireless Access, both for fixed and mobile use. This paper presents the structure of some testbeds, set up in the framework of the European project WEIRD, about novel applications running on top of a WiMAX-based end-to-end architecture. The presented testbeds are based on real use case scenarios, including monitoring of impervious areas, tele-medicine and tele-hospitalization.
      156  838
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Using WiMAX technology to improve volcano monitoring: the WEIRD System

    IEEE 802.16 standards (IEEE, 2004; IEEE, 2005), commonly known as WiMAX (Worldwide Interoperability for Microwave Access Forum), is one of the most promising broadband wireless access technology for next generation all-IP networks. This access technology allows reaching high bit rate and covering large areas with a single Base Station (BS). Thanks to these features, IEEE 802.16 opens the way for the use and the introduction of wireless technologies in particular emergency scenarios, like volcano monitoring. Active volcano surveillance is based prevalently on the analysis of geophysical and geochemical parameters gathered by monitoring networks. Of all, seismology is one of the most useful methods for volcano monitoring. In fact, several types of seismic signals, e.g. volcano-tectonic earthquakes (VT), long-period events (LP), volcanic tremor, can occur before and during an eruption. The analysis and interpretation of these seismic signals are a very important task for the volcanic eruption forecasting (Scarpa and Tilling, 1996). WiMAX technology can be applied to provide broadband wireless access in volcano monitoring scenarios, in order to solve all the problems that today limit the possibility to realize a real-time and accurate monitoring of volcanoes activities in emergency situations. In particular, this paper focus on a novel solution, designed within the IST FP6 EU WEIRD (WiMAX Extension to Isolated Research Data networks) Integrated Project, to perform volcano monitoring using the features offered by IEEE 802.16 networks in order to improve transmission of data acquired by temporary seismic stations deployed during emergencies. Tests performed on field demonstrate the advantages offered by the use of WiMAX compared with other commonly used technologies.
      142  360
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geothecnical modelling of the subsoil of Rome (Italy) by means of multivariate geostatistics

    A research project was carried out by the C.N.R. to develop an integrated geological-geotechnical model of the subsoil of Rome. Data of more than 6000 boreholes were archived in a GIS and used to develop the geological model; the results presented in this work mainly focused on the upper Pleistocene-Holocene alluvial deposits. Information of more than 2000 boreholes penetrating the alluvial deposits was encoded and elaborated using geostatistics to model the sedimentary bodies. Spatial variability of the physical and mechanical properties was also investigated to develop the geotechnical model. Multiple linear regression, kriging, and cokriging were applied to estimate the drained friction angle φ’; cross-validation demonstrates the cokriging with the PCA factors as auxiliary variables being the most suitable method. In progress work on cokriging of φ’ using granulometries as auxiliary variables demonstrates this approach to be viable for future applications.
      218  421
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    I terreni di Roma sotto l'aspetto della geologia tecnica

    research project was carried out by the C.N.R. to develop an integrated geological-geotechnical model of the subsoil of Rome. Data of more than 6000 boreholes were archived in a GIS and used to develop the geological model; the results presented in this work mainly focused on the upper Pleistocene-Holocene alluvial deposits. Information of more than 2000 boreholes penetrating the alluvial deposits was encoded and elaborated using geostatistics to model the sedimentary bodies. Spatial variability of the physical and mechanical properties was also investigated to develop the geotechnical model. Multiple linear regression, kriging, and cokriging were applied to estimate the drained friction angle φ’; cross-validation demonstrates the cokriging with the PCA factors as auxiliary variables being the most suitable method. In progress work on cokriging of φ’ using granulometries as auxiliary variables demonstrates this approach to be viable for future applications.
      463  37
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Microgravity prospecting in order to research sinkholes risk areas

    Recently many sinkholes have been formed in some peculiar areas of the C entral Italy. Although the causes of sinkholes genesis are enough known,the collapse mechanisms and the original cavity depth and geometry are not recognized.
      58  44