Skip to main content
The search returned 8 results
Now showing 1 - 8 of 8
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Composition and thermal structure of the lithosphere beneath the Ethiopian plateau: evidence from mantle xenoliths in basanites, Injibara, Lake Tana Province

    Petrographic, minerochemical, and geothermobarometric data are reported for a suite of spinel-lherzolite pargasite xenoliths hosted in a Quaternary basanitic lava flow from the North-Western Ethiopian Plateau (Injibara, Lake Tana Province). Protogranular to porphyroclastic (deformed) rocks show evidence of a modal metasomatism, represented by a Cl-rich pargasitic amphibole, coupled with cryptic enrichment in Fe and Al. Equigranular rocks (granular) record a further cryptic metasomatism, represented by enrichment in Fe, Al, Na, and depletion in Ni, Cr and Cl. Some xenoliths (transitional) show intermediate textural and compositional characters, indicating that the granular samples represent an evolution of the deformed ones. All xenoliths give the same P–T equilibration conditions for Opx-Cpx pairs (947–1015 C and 1.3–2.0 GPa), but in granular samples, recrystallised olivine and spinel record T about 100 C higher. Two distinct metasomatic processes, probably connected with the emplacement of the Afar plume, are proposed. The first one is a pervasive modal metasomatism produced by water-rich fluids. The latter is a non-pervasive cryptic metasomatism, probably connected to migration of melts. The comparison the mantle beneath the Ethiopian Volcanic Plateau, the southern Main Ethiopian Rift and the central Main Ethiopian Rift suggests spatial heterogeneity of the mantle and variable mantle processes during asthenospheric upwelling.
      239  20
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Nuova formulazione delle procedure per la stima dell’intensità macrosismica da dati epicentrali o da risentimenti in zone vicine

    Vengono presentate nuove relazioni empiriche, definite per il territorio italiano, per la stima dell’intensità in un dato sito a partire da informazioni epicentrali o relative a località vicine. Queste relazioni, espresse in forma probabilistica e quindi direttamente utilizzabili per la stima della pericolosità sismica, condividono la stessa formalizzazione e la medesima base informativa. In particolare, sono state seguite tre diverse strategie: le prime due hanno portato alla definizione di una relazione di attenuazione per la stima dell’intensità al sito da dati epicentrali utilizzando una forma parametrica rispettivamente Gaussiana e Binomiale; la terza analisi è stata invece mirata a definire le modalità di “correzione” del valore locale di intensità, dedotto dalle informazioni epicentrali, con dati di risentimenti osservati in località vicine al sito in esame.
      186  245
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Confronto fra stime di pericolosità sismica in Italia

    (2009-06-28) ; ; ;
    Mucciarelli, M.; Dip. di Strutture, Geotecnica e Geologia Applicata, Università della Basilicata
    ;
    Albarello, D.; Dipartimento di Scienze della Terra, Università di Siena
    Allo scopo di valutare l’attendibilità delle stime di pericolosità sismica recentemente proposte per l’Italia sulla base di un approccio standard basato sull’impiego di informazioni geologiche (zone sismogenetiche) e sismologiche (catalogo sismico epicentrale), viene proposto un confronto con stime di pericolosità effettuate a partire dall’analisi statistica delle storie sismiche di sito relative alle 1401 località per le quali esistono informazioni circa glie effetti macrosismici osservati in occasione di almeno dieci terremoti del passato. In particolare, sono stati messi a confronto i valori dell’accelerazione massima orizzontale del moto del suolo corrispondente ad una probabilità di eccedenza del 10% in 50 anni dedotti con l’approccio standard, con i valori dell’intensità macrosismica corrispondente alle stesse probabilità di eccedenza per un tempo di ritorno di 50 anni. Il confronto, effettuato con una procedura non parametrica che non richiede l’impiego relazioni di conversione empiriche, indica che le differenze osservate sono fortemente correlate con la geometria delle zone sismotettoniche utilizzate nell’approccio standard. In particolare, la zonazione sembra incompleta (sembrano esistere zone “nascoste”) e a tratti troppo grossolana (a causa della scarsità dei dati disponibili) per rappresentare adeguatamente i processi sismogenici attivi nell’area italiana.
      158  462
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Testing probabilistic seismic hazard estimates by comparison with observations: an example in Italy

    (2008-12) ; ;
    Albarello, D.; Dipartimento di Scienze della Terra, Università di Siena
    ;
    D'Amico, V.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
    ;
    An evaluation of the actual reliability of probabilistic seismic hazard (PSH) assessments, provided by existing numerical techniques, is mandatory to orientate new researches and improvements. Two procedures devoted to this task are proposed, which are based on the comparison of the hazard estimates with empirical observations (e.g. strong-motion data). These procedures have been applied to the estimates provided by the methodology adopted for most recent seismic hazard evaluations in Italy. The analysis shows that a significant mismatch exists between peak ground acceleration values characterized by an exceedence probability of 10 per cent in 30 yr and what has actually been observed at 68 accelerometric stations located on stiff soil, where continuous seismicity monitoring has been performed in the last 30 yr. Although this finding should be considered with caution, it suggests that a future re-examination of the adopted PSH computational model could be useful to avoid possible underestimates of seismic hazard in Italy.
      283  37
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Valutazioni di pericolosità sismica in termini di intensità macrosismica utilizzando metodi di sito

    Vengono presentate le stime di pericolosità sismica, in termini di intensità macrosismica, ottenute mediante l’approccio probabilistico proposto da Albarello e Mucciarelli (2002), basato sull’impiego dei dati documentari relativi agli effetti locali prodotti dai terremoti passati (storie sismiche di sito). I risultati forniti da questa procedura (approccio “di sito”), in termini di minimo valore di intensità caratterizzato da una probabilità di eccedenza inferiore al 10% in 50 anni (Iref), sono confrontati con quelli ottenuti sul territorio italiano tramite la metodologia “standard” di Cornell-McGuire. Per meglio comprendere i motivi delle differenze osservate tra le due stime e il ruolo di differenti basi informative, sono state prodotte diverse mappe di pericolosità. Stime di pericolosità a scala locale sono state inoltre effettuate nell’area dell’Etna dove, grazie a numerosi studi macrosismici di dettaglio, sono disponibili storie sismiche di sito particolarmente ricche.
      285  268
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Comparison of Probabilistic Seismic Hazard Estimates in Italy

    (2008-12) ; ; ;
    Mucciarelli, M.; Dipartimento di Strutture, Geotecnica, Geologia Applicata all'Ingegneria, Università della Basilicata
    ;
    Albarello, D.; Dipartimento di Scienze della Terra, Università di Siena
    Macroseismic intensity has recently attracted attention as a tool for validating probabilistic seismic hazard assessment (PSHA) studies or as an alternative method for PSHA in countries where the historical catalog is much longer than the instrumental one. In Italy, the new seismic hazard map was recently produced using the Cornell–McGuire approach in terms of the peak ground acceleration characterized by a 10% exceedance probability for an exposure time of 50 yr (Amax). We compare this map with an alternative one, produced using a different approach based on a nonparametric and zonation-free statistical analysis of local seismic histories. In this case, results are expressed in terms of the maximum intensity corresponding to an exceedance probability of not less than 10% for an exposure time of 50 yr (Iref ). In order to compare the two maps, we selected 1401 control sites, where local seismic history includes at least 10 intensity values relative to felt effects documented during past earthquakes. The values of Amax and Iref at these sites have been ranked in the respective domains. The spatial distribution of rank differences of Amax and Iref values shows a strong correlation with the seismogenic zoning used in the calculation of PSHA following the Cornell–McGuire approach. This suggests that the adopted zoning could be incomplete (some further “hidden” sources may exist) and too rough to capture actual seismogenic sources. Because more detailed zoning is prevented by the amount of data available, the results obtained suggest the preference of zonation-free approaches for seismic hazard assessment in Italy. Furthermore, among the possible zonation-free approaches, those that offer better exploitation of local information about the effects of past earthquakes would be preferred.
      458  45
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    SASHA: A Computer Program to Assess Seismic Hazard from Intensity Data

    (2008-09) ; ;
    D'Amico, V.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
    ;
    Albarello, D.; Dipartimento di Scienze della Terra, Università di Siena
    ;
    The evaluation of seismic hazard over wide territories is a basic tool for planning activities aimed at earthquake damage mitigation. This is commonly performed through probabilistic approaches based on the statistical analysis of past seismicity. Among these, due to its wide application worldwide, the Cornell-McGuire approach (Cornell 1968; McGuire 1978) has become a kind of “standard” methodology for probabilistic seismic hazard assessment (PSHA). In Italy, several national seismic hazard maps were produced in recent years (Slejko et al. 1998; Albarello et al. 2000; MPS Working Group 2004) by following this procedure as implemented by Bender and Perkins (1987). Yet despite its widespread application, this standard methodology presents severe drawbacks due to its strong sensitivity to some ill-defined aspects, such as geometry of seismic sources, attenuation of ground motion with distance from the source, completeness of available seismic catalogs, etc. Moreover, this kind of approach does not allow the full exploitation of a large amount of documentary data available at the site about the seismic effects of past earthquakes (Albarello and Mucciarelli 2003). Another drawback is that the standard approach was developed with the assumption that the seismicity database used to feed the computational model is constituted by instrumental data (magnitude, epicentral locations, etc.). However, in many countries (first and foremost, Italy) the bulk of the seismic database is constituted by macroseismic data, and thus the application of the standard method requires a “forcing” of macroseismic information into a para-instrumental format. But macroseismic information is not isomorphic to instrumental data since intensity values are discrete, ordinal, and range-limited. This implies that, in principle, mathematical formalizations suitable to instrumental information cannot be used to manage macroseismic data (see, e.g., Pasolini et al. 2008a, 2008b). To overcome some of these difficulties and to better exploit available information, probabilistic hazard evaluations based on observed intensity data were performed in Europe (Monachesi et al. 1994; Papoulia and Slejko 1997; Azzaro et al. 1999; Albarello et al. 2002) and Japan (Bozkurt et al. 2007) using alternative numerical procedures. An apparent limitation of these studies is the fact that PSH estimates are provided in terms of intensity, and this conflicts with the fact that ground acceleration still remains the traditional output of PSHA devoted to seismic design. However, a new interest has recently grown around macroseismic intensity. In fact, when damage scenarios and post-earthquake emergency planning are of concern, hazard assessment in terms of intensity as ground-shaking measure may be more suitable than conventional estimates based on instrumental parameters (PGA, etc.). A further possible advantage of these kinds of approaches is that they provide hazard evaluations completely independent from the standard ones and more directly linked to empirical observations (local seismic history). Thus, they could represent a useful benchmark for a direct assessment of reliability of traditional PSH estimates (Mucciarelli et al. 2000, 2006, 2008; Bozkurt et al. 2007). In this paper we present the computer program SASHA (Site Approach to Seismic Hazard Assessment), which implements the intensity-based PSHA procedure originally proposed by Magri et al. (1994) and then improved by Albarello and Mucciarelli (2002). It relies on the analysis of the site seismic history, i.e., the dataset of seismic effects (macroseismic intensities) documented during past earthquakes at a given locality. This methodology (hereafter, site approach) has been specifically developed to handle macroseismic data, and thus both the peculiar nature of intensity values (discrete, ordinal, range-limited) and relevant uncertainty (ill-defined intensity values, completeness of site seismic history, etc.) are taken into account by a coherent statistical approach that does not require any assumption about earthquake recurrence model and seismic source geometry. Furthermore, no aftershock removal is required in advance and epicentral data are only considered to integrate (when necessary) felt data at the site. Several PSHA studies have been performed in the last decade in Italy using different versions of the site approach (Mucciarelli et al. 2000; Albarello et al. 2002; D’Amico and Albarello 2003; Albarello, Azzaro et al. 2007; Azzaro et al. 2008). SASHA’s theoretical background is briefly outlined in the next section of the paper. Then, we describe the most important features of SASHA along with a sample application to the Italian area.
      546  135
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Codice per il calcolo della pericolosità sismica da dati di sito: SASHA (Site Approach to Seismic Hazard Assessment)

    (2007-07-31) ; ;
    D'Amico, V.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
    ;
    Albarello, D.; Dipartimento di Scienze della Terra, Università di Siena
    ;
    Viene presentato il codice di calcolo SASHA che implementa l’approccio probabilistico proposto da Albarello e Mucciarelli (2002) alla stima della pericolosità sismica in termini di intensità macrosismica. Elemento chiave della metodologia è la storia sismica locale, ovvero i risentimenti documentati al sito dei terremoti passati eventualmente integrati da risentimenti “virtuali” dedotti a partire da dati epicentrali. La procedura (approccio “di sito”), appositamente sviluppata per l’analisi di dati di intensità, consente di utilizzare in modo formalmente corretto la grande quantità di informazioni macrosismiche disponibili in paesi come l’Italia. Oltre al presente testo, nel quale è descritto in dettaglio l’utilizzo del programma (metodologia, opzioni di calcolo, formato dei file di input/output), vengono allegati l’eseguibile di SASHA e un esempio dei file di input (catalogo epicentrale e dei risentimenti macrosismici, elenco di località) e output.
      251  252