PRELIMINARY PSHA APPLICATION OF AN INTENSITY PREDICTION EQUATION IN ITALY CONSIDERING POSSIBLE INFLUENCE OF SOIL CONDITIONS POSTER 123
Type
Poster session
Language
English
Obiettivo Specifico
OST2 Deformazione e Hazard sismico e da maremoto
Status
Published
Journal
39th General Assembly of the European Seismological Commission ESC2024,
Date Issued
September 25, 2024
Conference Location
Corfu Holiday Palace Hotel, Corfu, Greece
Abstract
The macroseismic intensity specifically relates to damage in a way that parameters like Peak Ground Acceleration (PGA) do not, thus providing a practical
measure to guide the priorities of Civil Protection interventions immediately following an event. In this study, we analyze the new macroseismic intensity
attenuation models proposed by Gomez-Capera et al. (2024), which are calibrated in moment magnitude (Mw) for the Italian territory, focusing on their potential
application in developing Probabilistic Seismic Hazard Assessment (PSHA) maps in terms of macroseismic intensity I. Specifically, we elected to test the Log-
Lin_10 model for macroseismic intensity due to its simpler mathematical and computational properties. A primary goal of these attenuation models is to allow
for the assessment of seismic hazard maps directly in terms of macroseismic intensity, thereby avoiding the uncertainties associated with converting various
ground shaking parameters into intensity values. In the present study, we compare the PSHA map obtained directly using the Gomez-Capera et al. (2024) model
with that derived from the Gomez-Capera et al. (2022) conversion of the PGA parameter into intensity I, and with the Italian National Seismic Hazard Map
(MPS04) in terms of macroseismic intensity (Gruppo di Lavoro MPS, 2004).
measure to guide the priorities of Civil Protection interventions immediately following an event. In this study, we analyze the new macroseismic intensity
attenuation models proposed by Gomez-Capera et al. (2024), which are calibrated in moment magnitude (Mw) for the Italian territory, focusing on their potential
application in developing Probabilistic Seismic Hazard Assessment (PSHA) maps in terms of macroseismic intensity I. Specifically, we elected to test the Log-
Lin_10 model for macroseismic intensity due to its simpler mathematical and computational properties. A primary goal of these attenuation models is to allow
for the assessment of seismic hazard maps directly in terms of macroseismic intensity, thereby avoiding the uncertainties associated with converting various
ground shaking parameters into intensity values. In the present study, we compare the PSHA map obtained directly using the Gomez-Capera et al. (2024) model
with that derived from the Gomez-Capera et al. (2022) conversion of the PGA parameter into intensity I, and with the Italian National Seismic Hazard Map
(MPS04) in terms of macroseismic intensity (Gruppo di Lavoro MPS, 2004).
References
Gomez Capera AA, Santulin M, D’Amico M, D’Amico V, Locati M, Meletti C, Varini E. 2023. Macroseismic intensity attenuation models calibrated in Mw for Italy. Bulletin of Earthquake Engineering 22:795–843. Open access. doi:10.1007/s10518-023-01822-8.
Gomez Capera AA, D’Amico M, Lanzano G, Locati M, Santulin M. 2020. Relations between ground motion parameters and macroseismic intensity in Italy. Bulletin of Earthquake Engineering 18:5143–5164. Open access. doi:10.1007/s10518-020-00905-0.
Gomez Capera AA, D’Amico M, Lanzano G, Locati M, Santulin M. 2020. Relations between ground motion parameters and macroseismic intensity in Italy. Bulletin of Earthquake Engineering 18:5143–5164. Open access. doi:10.1007/s10518-020-00905-0.
File(s)![]()
Name
PosterESC24Int-final.pdf
Size
1.34 MB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
b941f2cd801d4561ae4cd2ec2290b910
