Skip to main content
The search returned 6 results
Now showing 1 - 6 of 6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Estimation of the maximum earthquakes magnitude based on potential brittle volume and strain rate: The Italy test case

    One major critical issue in seismic hazard analysis deals with the computation of the maximum earthquake magnitude expected for a given region. Its estimation is usually based on the analysis of past seismicity that is incomplete by definition, or derived from the dimension of faults through empirical relationships with the intrinsic uncertainty in source characterization. Here, we propose a workflow aimed at providing a time- independent estimate for the maximum possible magnitude based on geological and geophysical evidence. Our estimate is also source unrelated as it is constrained by the seismic brittle volume of the crust that scales with the effective seismic energy. The seismic brittle volume is calculated considering fault kinematics and rock rheology (i.e., the brittle-ductile transition depth) over a grid that covers the entire study area. The maximum earthquake magnitude is calculated at each point of the grid based on a volume/magnitude empirical rela- tionship. We apply this model to Italy for which we propose a map of the maximum possible magnitudes. Maximum predicted magnitudes are 7.3 ± 0.25 for thrust faulting, 7.6 ± 0.77 for normal faulting and 7.6 ± 0.37 for strike-slip faulting (± deviation from the mean value calculated at each node). These magnitudes are locally higher than the historical record. This could be due to an overestimation of the involved volumes; smaller volumes and lower magnitudes may occur where faults are detached at decollements shallower than the brittle ductile transition or where they behave aseismically. Alternatively, strong or major earthquakes could be possible, but they have longer recurrence time and they have never been recorded yet in Italy. Regardless these values are fully reliable or not, the recurrence of earthquakes with the predicted magnitude is related to current strain rates. We conclude that a large part of the Italian territory is prone to trigger Mw > 5 earthquakes.
      49  51
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A novel and versatile apparatus for brittle rock deformation

    This paper describes a new biaxial rock deformation apparatus within a pressure vessel, consisting of a stainless steel vessel with an internal diameter of 40 cm and six main access ports for electronics ( 100 pins), pore fl uids (three lines), and con fi ning oil. The apparatus has to ability to work on large rock samples, up to 20 20 cm 2 , with horizontal and vertical forces up to 1.5 MN. The maximum con fi ning pressure of the vessel is 70 MPa, and fl uid fl ow properties and permeability of large-samples can be tested using up to 8 L of fl uids that can be pressurized up to 30 MPa. Sliding velocity during experiments is in the range 0.1 μ m/s – 1.0 cm/s. The machine stiffness is 0.91 kN/ μ m and 1.3 kN/ μ m for the vertical and horizontal axes, respectively. Measurements on friction, velocity dependence of friction and healing properties of reference material like granite and talc replicate the values presented in the literature. Triaxial stress state tests with controlled con fi ning and pore fl uid pressure, and fl uid fl ow through the samples have been performed successfully. The machine is extremely versatile, as it works as a uniaxial, triaxial or true-triaxial apparatus, on rock samples with dimensions ranging from several to tens of centimetres. Due to the broad number of potential operating conditions, we decided to name the machine BRAVA: Brittle Rock deformAtion Versatile Apparatus
      520  47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Primary magmatic calcite reveals origin from crustal carbonate

    Wehave investigated lava flows representative of thewhole eruptive history of the Colli Albani ultrapotassic volcanic district (Central Italy). One of the most intriguing features concerning some of these lava flows is the occurrence of primary, magmatic calcite in the groundmass. The primary, magmatic nature of calcite has been inferred by microtextural investigations showing that it typically occurs i) interstitially, associated with clinopyroxene, nepheline and phlogopite, ii) in spherical ocelli, associated with nepheline, fluorite and tangentially arranged clinopyroxene, and iii) in corona-like reaction zones around K-feldspar xenocrysts. These microtextural features distinctly indicate that calcite crystallized froma carbonate melt in a partially molten groundmass, implying that the temperature of the system was above the solidus of the hosted lava flow (N850 °C). Geochemical features of calcite crystals (i.e., stable isotope values and trace element patterns) corroborate their primary nature and give insights into the origin of the parental carbonate melt. The trace element patterns testify to a high-temperature crystallization process (not hydrothermal) involving a carbonate melt coexisting with a silicate melt. The high δ18O (around 27‰SMOW) andwide δ13C (−18 to+5‰PDB) values measured in the calcites preclude a mantle origin, but are consistent with an origin in the crust. In this framework, the crystallization of calcite can be linked to the interaction between magmas and carbonate-bearing wall rocks and, in particular, to the entrapment of solid and/or molten carbonate in the silicate magma. The stability of carbonate melt at lowpressure and the consequent crystallization of calcite in the lava flow groundmass are ensured by the documented, high activity of fluorine in the studied system and by the limited ability of silicate and carbonate melts to mix at syn-eruptive time scales.
      293  49
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Thermal decomposition along natural carbonate faults during earthquakes

    (2013) ; ; ; ;
    Collettini, C.; Università Sapienza
    Earthquake slip is facilitated by a number of thermally activated physicochemical processes that are triggered by temperature rise during fast fault motion, i.e., frictional heating. Most of our knowledge on these processes is derived from theoretical and experimental studies. However, additional information can be provided by direct observation of ancient faults exposed at the Earth’s surface. Although fault rock indicators of earthquake processes along ancient faults have been inferred, the only unambiguous and rare evidence of seismic sliding from natural faults is solidifi ed friction melts or pseudotachylytes. Here we document a gamut of natural fault rocks produced by thermally activated processes during earthquake slip. These processes occurred at 2–3 km depth, along a thin (0.3–1.0 mm) principal slip zone of a regional thrust fault that accommodated several kilometers of displacement. In the slip zone, composed of ultrafi ne-grained fault rocks made of calcite and minor clays, we observe the presence of relict calcite and clay, numerous vesicles, poorly crystalline/amorphous phases, and newly formed calcite skeletal crystals. These observations indicate that during earthquake rupture, frictional heating induced calcite decarbonation and phyllosilicate dehydration. These microstructures may be diagnostic for recognizing ancient earthquakes along exhumed faults.
      157  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Clinopyroxene–liquid thermometers and barometers specific to alkaline differentiated magmas

    We present new thermometers and barometers based on clinopyroxene–liquid equilibria specific to alkaline differentiated magmas. The new models were calibrated through the regression analyses of experimental datasets obtained by merging phase equilibria experiments from the literature with new experiments performed by using trachytic and phonolitic starting compositions. The regression strategy was twofold: (1) we have tested previous thermometric and barometric equations and recalibrated these models using the new datasets; (2) we have calibrated a new thermometer and a new barometer including only regression parameters that closely describe the compositional variability of the datasets. The new models yield more precise estimates than previous thermometers and barometers when used to predict temperatures and pressures of alkaline differentiated magmas. We have tested the reliability of the new equations by using clinopyroxene–liquid pairs from trachytes and phonolites erupted during major explosive eruptions at the Phlegrean Fields and Mt. Vesuvius (central Italy). The test yielded crystallization conditions comparable to those determined by means of melt and fluid inclusion analyses and phase equilibria studies; this validates the use of the proposed models for precise estimates of crystallization temperatures and pressures in differentiated alkaline magmas. Because these magmas feed some of the most voluminous, explosive, and threatening volcanic eruptions in the world, a better understanding of the environmental conditions of their reservoirs is mandatory and this is now possible with the new models provided here.
      280  50
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Basalt-crust interaction processes: insights from experimental petrology

    (Nova Science Publishers, 2011) ; ; ; ;
    Mollo, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    The evolution of magmas has been one of the focal point of petrological studies since the first decade of the past century. Simple processes, such as fractional crystallization, mixing, and mingling, although well documented, do not fully explain the chemical peculiarities of many magmas [Barley, 1986; Knesel and Davidson, 1996; Lassen et al., 2004; Dungan and Davidson, 2004; Tegner et al., 2005]. For example, more complex processes must be invoked in the case of magma-crust interaction, e.g. assimilation and fractional crystallization (AFC), assimilation and equilibrium crystallization (AEC), recharge assimilation and fractional crystallization (RAFC), recharge tapping and fractionation assimilation RTFA, to explain geochemical, isotopic, and, to a minor extent, major elements features [Hildreth and Moorbath; 1988; Spera and Bohrson, 2001]. Interpreting the elemental and isotopic compositions of mantle-derived magmas in terms of mantle processes and determining how these relate to the magma ascent and emplacement, depends on recognizing that the geochemical signatures imparted by magma generation processes into the source, may be overprinted by open-system processes during intracrustal evolution.
      267  78