Skip to main content
The search returned 3 results
Now showing 1 - 3 of 3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    EMPIRICAL EVALUATION OF THE HORIZONTAL-TO-VERTICAL SPECTRAL RATIO TECHNIQUE: RESULTS FROM THE “SESAME” PROJECT

    In order to empirically evaluate the horizontal-to-vertical (H/V) spectral ratio technique, ambient noise measurements performed in about two hundred sites mainly in Europe where weak or/and strong motion data was recorded. Standard Information Sheets (SIS) and earthquake information data were included in the SESAME [Site EffectS assessment using AMbient Excitations] project database, specially designed to facilitate data selection. All noise recordings were processed with JSESAME software to calculate (H/V) spectral ratio, whereas weak and strong motion earthquake recordings were processed with a similarly standardized procedure. For the latter, (H/V) receiver function for all sites were calculated. Experimental site transfer functions obtained from earthquake recordings were compared with the (H/V) spectral ratios from noise recordings in terms of fundamental frequency, amplification bandwidth and amplification level. Similarities and differences between (H/V) spectral ratio of noise and earthquake recordings are presented and discussed. In addition, a dense grid of noise measurements were performed within urban environment of cities affected by strong earthquake (Greece: Thessaloniki, Kalamata, Italy: Palermo). It seems that the (H/V) spectral ratio may satisfactorily indicate areas favorable to the occurrence of higher damage in urban environment. However, quantitative correlation between (H/V) spectral ratio properties and damage distribution (macroseismic intensity, damage grades) in some cases, is difficult to be established given the complexity of parameters involved.
      273  763
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Sesame Project - Deliverable D04-04 - Report of the WP04 H/V Technique : Empirical Evaluation - Homogeneous Data Set of Noise and Earthquake Recordings at Many Sites

    In this Report the homogeneous data set of earthquake and noise recordings at many sites that is generated under the framework of the SESAME Project (Site Effects Assessment Using Ambient Excitations, EC- RGD, Project No. EVG1-CT-2000-00026 SESAME), Task A (H/V technique), Work Package 04 (WP04– H/V Technique: Empirical Evaluation), is presented. Three main topics are included in the Report: (a) The Standard Information Sheet (SIS) structure, (b) The SESAME Ascii Format (SAF) files, and (c) The SESAME SIS-database. The SIS compiled in this sub-task and SAF format adopted for all data, constitute a homogeneous data set to be processed for further scientific results in the framework of the WP04. In addition, the SIS-database is going to facilitate data selection and management.
      293  710
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Sesame Project - Deliverable D08-02 - WP02 H/V technique : experimental conditions - Final report on Measurement Guidelines

    In the following we report the final results for WP02-Measurement Guidelines. This work was conducted under the framework of the SESAME Project (Site Effects Assessment Using Ambient Excitations, EC-RGD, Project No. EVG1-CT-2000-00026 SESAME), Task A (H/V technique), Work Package 02 (WP02 – Measurement Guidelines).
      222  384