Skip to main content
The search returned 2 results
Now showing 1 - 2 of 2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Derivation of Vs30 f rom dispersion curve: skipping the inversion step?

    In the framework of the EU-NERIES project, 20 sites among all European strong motion sites in Italy, Greece, T urkey and France were selected to be representative of most common soil classes, and for which shear-wave velocities from borehole measurements (cross-hole and down-hole tests) are available. Passive (array noise) and active experiments have been carried out at these sites in order to evaluate the ability of surface waves technique to provide reliable estimates of shear-wave velocity profiles. In order to stay cheap and feasible, active seismic experiments involving 24 geophones and hammer source were carried out at all sites. Data were processed by using the MASW technique and Rayleigh and Love waves dispersion curves were retrieved from 5-10 Hz to 30-50 Hz. Passive array experiments were also performed by using 8 seismological stations linked with wireless connections and monitored with near real-time processing. Combining up to four different arrays with aperture ranging from 10 m and to 900 m, Rayleigh and Love waves dispersion curves were derived over a broad frequency range (from 0.5 Hz up to 45 Hz) by using the FK and MSPAC techniques. At about 75% sites, dispersion curves from ambient vibration and MASW are in good agreement over the overlapping frequency band. T he other 25% sites correspond to complex geometrical site structures. Whatever the site, passive experiments are shown to be very suitable to retrieve accurate estimates of phase velocities at high frequency (over 20-30 Hz). T his experiment also clearly outlined the limited penetration depth (comprised between 15 and 25 m) of the MASW technique. Inversion of dispersion curves to derive shear-wave profiles and EC8 site class (which is mainly based on Vs30) is a difficult and highly debated issue. Here we test an alternative to get average shear-wave profiles and especially Vs30 from the dispersion curves only. For these 20 sites, we show that site classes may be estimated directly from the dispersion curves. T heses results are confirmed by an extensive study involving about 800 velocity profiles from real sites.
      268  263
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Joint inversion of Rayleigh wave ellipticity and spatial autocorrelation measurements

    The local soil structure (i.e. shear and pressure wave velocities) can be obtained by inversion of dispersion curves ranging over a sufficiently large frequency band. However, measurements of such dispersion curves using ambient seismic vibrations require a large number of seismometers and a long measuring time. As a simple alternative, we propose to invert Rayleigh wave ellipticity obtained by ambient seismic noise measurements at a single site using a method based on the random decrement technique (Hobiger et al., 2009). Indeed, the freSeismological Research Letters Volume 81, Number 2 March/April 2010 305 quency-dependency of Rayleigh wave ellipticity is tightly related to the shear wave profile of the soil. However, as different soil structures can result in the same ellipticity curve (e.g. homothetic structures in velocity and thickness), the inversion of ellipticity curves alone is ambiguous. Therefore, additional measurements fixing the shearwave velocity in the superficial layers have to be included into the inversion process. We suggest using a small number of seismic stations to measure spatial autocorrelation curves. In this way, three seismic sensors and one hour of measurements can be sufficient to invert the local soil structure. We will present the method to extract the Rayleigh wave ellipticity curve, show which parts of the ellipticity curve have to be included in the inversion process and demonstrate the benefit of the additional spatial autocorrelation curve measurements. Then, we will present an example application to real noise data collected within the framework of the European NERIES project at well-known European accelerometric sites and the results will be compared to th
      192  55