Skip to main content
The search returned 5 results
Now showing 1 - 5 of 5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Can an impulsive variation of the solar wind plasma pressure trigger a plasma bubble? A case study based on CSES, Swarm and THEMIS data

    During the August 25, 2018 geomagnetic storm, the new borne CSES-01 satellite and the Swarm A satellite detected a really large equatorial plasma bubble (EPB) in the post-midnight sector over western Africa. We investigated the features of this deep ionospheric plasma depletion using data from the Langmuir probes on-board CSES-01 and Swarm A satellites, and data from the high-precision magnetometer and the electric field detector instruments on-board CSES-01. Using also plasma and magnetic field data from THEMIS-E satellite we found that, during the passage of the magnetic cloud that drove the geomagnetic storm, an impulsive variation lasting about ten minutes characterized the solar wind (SW) pressure. The analysis of the delay time, between the occurrence of such impulsive variation and the detection of the plasma bubble, suggests a possible link between the SW pressure impulsive variation as identified by THEMIS-E and the generation of the EPB as detected by CSES-01 and Swarm A. We put forward the hypothesis that the SW pressure impulsive variation might have triggered an eastward prompt penetrating electric field that propagated from high to equatorial latitudes, overlapping in the nightside region to the zonal westward electric field, causing either a reduction or an inversion, at the base of the EPB triggering.
      463  303
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Probabilistic Tsunami Hazard Analysis: High Performance Computing for Massive Scale Inundation Simulations

    Probabilistic Tsunami Hazard Analysis (PTHA) quantifies the probability of exceeding a specified inundation intensity at a given location within a given time interval. PTHA provides scientific guidance for tsunami risk analysis and risk management, including coastal planning and early warning. Explicit computation of site-specific PTHA, with an adequate discretization of source scenarios combined with high-resolution numerical inundation modelling, has been out of reach with existing models and computing capabilities, with tens to hundreds of thousands of moderately intensive numerical simulations being required for exhaustive uncertainty quantification. In recent years, more efficient GPU-based High-Performance Computing (HPC) facilities, together with efficient GPU-optimized shallow water type models for simulating tsunami inundation, have now made local long-term hazard assessment feasible. A workflow has been developed with three main stages: 1) Site-specific source selection and discretization, 2) Efficient numerical inundation simulation for each scenario using the GPU-based Tsunami-HySEA numerical tsunami propagation and inundation model using a system of nested topo-bathymetric grids, and 3) Hazard aggregation. We apply this site-specific PTHA workflow here to Catania, Sicily, for tsunamigenic earthquake sources in the Mediterranean. We illustrate the workflows of the PTHA as implemented for High-Performance Computing applications, including preliminary simulations carried out on intermediate scale GPU clusters. We show how the local hazard analysis conducted here produces a more fine-grained assessment than is possible with a regional assessment. However, the new local PTHA indicates somewhat lower probabilities of exceedance for higher maximum inundation heights than the available regional PTHA. The local hazard analysis takes into account small-scale tsunami inundation features and non-linearity which the regional-scale assessment does not incorporate. However, the deterministic inundation simulations neglect some uncertainties stemming from the simplified source treatment and tsunami modelling that are embedded in the regional stochastic approach to inundation height estimation. Further research is needed to quantify the uncertainty associated with numerical inundation modelling and to properly propagate it onto the hazard results, to fully exploit the potential of site-specific hazard assessment based on massive simulations.
      295  118
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Monitoraggio di Sismicità Antropogenica

    In Italia, la discussione sulla sismicità antropogenica è iniziata nel 2012, a seguito del terremoto M=6 in Emilia-Romagna. La vicinanza dell’epicentro ai siti di produzione di idrocarburi (per esempio, la concessione di estrazione di olio Mirandola-Cavone) sollevava la questione se le perturbazioni di stress indotte dall’attività di sfruttamento avrebbero potuto innescare tali eventi. Come prima conseguenza il governo incaricò una commissione internazionale – chiamata ICHESE (International Commission on Hydrocarbon Exploration and SEismicity) – con il compito di esprimere un parere su tale questione. ICHESE concludeva che le variazioni di stress introdotte dall’attività industriale non erano probabilmente sufficienti per indurre sismicità, ma che non poteva essere escluso con certezza che le attività umane avessero innescato gli eventi (Astiz et al., 2014). Nel 2014, l’ISPRA (Istituto Superiore per la Ricerca e la Protezione dell’Ambiente) pubblicò un rapporto su casi documentati e ipotizzati di sismicità indotta e/o innescata in Italia (Fig. 1). Basato su tale rapporto - e su richiesta del DGS-UNMIG - il Ministero dello Sviluppo Economico (MISE) nominò un gruppo di esperti nazionali, che redassero nel 2014 gli “Indirizzi e le Linee Guida” (ILG). Le ILG regolano attraverso l’applicazione di un “sistema a semaforo” le modalità di monitoraggio delle pressioni di poro, della sismicità e della deformazione del sottosuolo per le attività di produzione di idrocarburi, della reiniezione delle acque di strato e dello stoccaggio dell’anidride carbonica. Gli ILG vengono applicati durante una fase biennale di sperimentazione in quattro aree test: (i) Casaglia (Emilia-Romagna) per produzione di energia geotermica a bassa entalpia, (ii) Minerbio (Emilia-Romagna,) per stoccaggio di gas, (iii) Cavone (Emilia-Romagna) per esplorazione di idrocarburi e reiniezione di acque reflue, (iv) Val d’Agri (Basilicata) per esplorazione di idrocarburi e reiniezione di acque di strato. L’INGV è stato incaricato di applicare le ILG alle concessioni delle aree di sperimentazione (ii-iv) e di esprimere un parere di validazione finale delle linee guida. Basato su esperienze recentemente maturate nell’area geotermica di Torre Alfina/Castel Giorgio, dove nel 2016 - mesi prima dell’inizio della produzione geotermica - si verificò un terremoto di ML=4.1, alcuni primi commenti critici relativi agli ILG possono già essere abbozzati: - Le aziende con nuove concessioni sono obbligate a realizzare un sistema di monitoraggio almeno un anno prima dell’inizio delle attività (periodo “bianco”), una regola che evidentemente non può valere per compagnie che hanno iniziato la produzione da decenni. - Con la prossima apertura del mercato per la produzione di energia geotermica molteplici concessioni saranno situate in vicinanza delle aree tradizionali sfruttate dall’ENEL, non escludendo che operatori differenti sfrutteranno lo stesso serbatoio geotermico. Qui si pone la domanda se l’obbligo dei nuovi operatori di dover stabilire il “bianco” sia significativo se l’area di produzione è già attiva da decenni. - Il regolamento degli ILG non indica eventuali conseguenze industriali relative alla futura produzione, in caso che la sismicità dovesse superare il livelli del sistema semaforo durante il periodo del “bianco”. Le ILG non prescrivono inoltre il metodo per il calcolo della magnitudo. La sismicità osservata nell’area geotermica di Torre Alfina/Castel Giorgio non dalla rete locale (12 in Fig. 1) dimostra che i valori della ML non sono compatibili con i valori delle ML stimate dalla rete nazionale. Tali differenze sono dovute a leggi di attenuazione e fattori di correzioni imprecise, specialmente per distanze epicentrali locali che possono essere inferiori alla profondità ipocentrale. In questi casi le soglie di ML fissate negli ILG non sono rappresentative e dovrebbero essere sostituite dai più significativi valori di PGA e PGV attese.
      196  158
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Constraints on the source mechanism of the damaging seismic event of August 21, 2017, on Ischia island (southern Italy)

    On Aug. 21, 2017, a MD4.0 earthquake struck Ischia island, claiming two lives and provoking severe building damages, disproportionate to the moderate magnitude of the event. Hypocenter locations based on arrival times were afflicted by a large uncertainty and the proposed moment tensor solutions resulted inconsistent among themselves. These contradictory observations gave motivation to recalculate earthquake parameters by alternative approaches. P-phase particle motion, the evaluation of the rotated spectra, and ts-tp lead to a hypocentral depth of 2 km, in the same epicentral area as the devastating seismic event that struck Ischia in 1883. The full moment tensor solution reveals non-double couple contributions of 62%—fitting best for a shallower source depth and estimating a higher magnitude of Mw4.2. To fit the first motion polarity mismatch observed at the closest station IOCA we suggest a complex rupture process, where a first shallow normal faulting event activates a subsequent collapse.
      80  129
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Aftershock modeling based on uncertain stress calculations

    We discuss the impact of uncertainties in computed coseismic stress perturbations on the seismicity rate changes forecasted through a rate- and state-dependent frictional model. We aim to understand how the variability of Coulomb stress changes affects the correlation between predicted and observed changes in the rate of earthquake production. We use the aftershock activity following the 1992 M7.3 Landers (California) earthquake as a case study. To accomplish these tasks, we first analyze the variability of stress changes resulting from the use of different published slip distributions. We find that the standard deviation of the uncertainty is of the same size as the absolute stress change and that their ratio, the coefficient of variation (CV), is approximately constant in space. This uncertainty has a strong impact on the forecasted aftershock activity if a rate-and-state frictional model is considered. We use the early aftershocks to invert for friction parameters and the coefficient of variation by means of the maximum likelihood method. We show that, when the uncertainties are properly taken into account, the inversion yields stable results, which fit the spatiotemporal aftershock sequence. The analysis of the 1992 Landers sequence demonstrates that accounting for realistic uncertainties in stress changes strongly improves the correlation between modeled and observed seismicity rate changes. For this sequence, we measure a friction parameter Aσn ≈ 0.017 MPa and a coefficient of stress variation CV = 0.95.
      181  1235