Politecnico di Milano
20 results
Filters
Settings
The search returned 20 results
Now showing 1 - 10 of 20
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Integrative Post-event Impact Assessment Framework for Volcanic Eruptions: A Disaster Forensic Investigation of the 2011–2012 Eruption of the Cordón Caulle Volcano (Chile)
Understanding the complexity of future volcanic impacts that can be potentially induced by the large variability of volcanic hazards and the multiple dimensions of vulnerability of the increasingly interdependent and interconnected societies, requires an in-depth analysis of past events. A structured and inclusive post-event impact assessment framework is proposed and applied for the evaluation of damage and disruption on critical infrastructures caused by the eruption of the Cordón Caulle volcano (Chile) in 2011–2012. This framework is built on the forensic analysis of disasters combined with the techniques of the root cause analysis that converge in a bow-tie tool. It consists of a fault tree connected to subsequent event trees to describe the causal order of impacts. Considering the physical and systemic dimensions of vulnerability, four orders of impact have been identified: i) the first order refers to the physical damage or the primary impact on a component of the critical infrastructure; ii) the second order refers to the loss of functionality in the system due to a physical damage on key components of the system; iii) the third order refers to the systemic impact due to the interdependency and connectivity among different critical infrastructures; and iv) a higher order is related to the consequences on the main economic sectors and to social disruption that can activate an overall damage to the economy of the country or countries affected. Our study in the Argentinian Patagonia shows that the long-lasting impact of the 2011–2012 Cordón Caulle eruption is mostly due to a secondary hazard (i.e., wind remobilisation of ash), which exacerbated the primary impact affecting significantly larger areas and for longer time with respect to primary tephra deposition. In addition, systemic vulnerability, particularly the intrinsic dependencies within and among systems, played a major role in the cascading impact of the analysed communities.152 152 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Performance Evaluation of VTEC GIMs for Regional Applications during Different Solar Activity Periods, Using RING TEC Values
This paper presents a comparison of the vertical total electron content (vTEC) estimated over Italy using two different approaches: the GPS Global Ionosphere Maps (GIMs) and the so called “calibration technique” developed by Ciraolo in 2007. The study has been carried out at a regional level by considering three Italian dual-frequency stations of the GPS permanent network “Rete Integrata Nazionale GPS (RING)”. The GPS receivers are permanently installed at Madesimo (geographical coordinates: 46.5 N, 9.4 E), Rome (geographical coordinates: 41.8 N, 12.5 E) and Resuttano (geographical coordinates: 37.7 N, 14.1 E), respectively in the north, center and south of Italy. Time windows selected for the analysis include periods of both low (July 2008 to June 2009) and high (September 2013 to August 2014) solar activity. The two datasets have also been studied considering both quiet and disturbed geomagnetic activity conditions. Moreover, the effects of an extreme geomagnetic storm have been investigated in March 2015 when the well-known St. Patrick storm occurred. Overall, GIM estimated values are always higher than those calibrated by the Ciraolo procedure for all the considered datasets. The differences between the two methods increase as the latitude decreases, and they increase as the solar activity intensifies. The outcomes of this study shall be helpful when applying GlMs at a regional level.499 84 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , New Insights into Long-Term Aseismic Deformation and Regional Strain Rates from GNSS Data Inversion: The Case of the Pollino and Castrovillari Faults
We present a novel inverse method for discriminating regional deformation and long-term fault creep by inversion of GNSS velocities observed at the spatial scale of intraplate faults by exploiting the different spatial signatures of these two mechanisms. In doing so our method provides a refined estimate of the upper bound of the strain accumulation process. As case study, we apply this method to a six year GNSS campaign (2003–2008) set up in the southern portion of the Pollino Range over the Castrovillari and Pollino faults. We show that regional deformation alone cannot explain the observed deformation pattern and implies high geodetic strain rate, with a WSW-ENE extension of 86±41×10−9/yr. Allowing for the possibility of fault creep, the modelling of GNSS velocities is consistent with their uncertainties and they are mainly explained by a shallow creep over the Pollino fault, with a normal/strike-slip mechanism up to 5 mm/yr. The regional strain rate decrease by about 70 percent and is characterized by WNW-ESE extension of 24±28×10−9/yr. The large uncertainties affecting our estimate of regional strain rate do not allow infering whether the tectonic regime of the area is extensional or strike-slip, although the latter is slightly more likely208 39 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Simulation of seismic ground motion fields via object-oriented spatial statistics with an application in Northern Italy
This work offers a novel methodological framework to address the problem of generating data-driven earthquake shaking fields at different vibration periods, which are key to support decision making and civil protection planning. We propose to analyse the entire profiles of spectral accelerations and project their information content to unsampled locations in the system, based on the theory of Object Oriented Spatial Statistics. The proposed methodology combines a non-ergodic ground motion model with a fully functional model for the residual term, the latter consisting of (i) the spatially-varying systematic effects due to source, site and path, and (ii) the remaining aleatory error. The proposed methodology allows to generate multiple shaking scenarios conditioned on the data, jointly and consistently for all the vibration periods, overcoming the intrinsic limitations of existing multivariate approaches to the problem. The approach is tested on a vast dataset of ground motion records collected in the study-area of the Po Plain (Northern Italy), for which a region-specific fully non-ergodic GMM was previously calibrated. Our validation tests demonstrate the potentiality of the approach, which is capable to effectively simulate spectral acceleration profiles, while keeping the ability to capture the main physical features of ground motion patterns in the region.476 83 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Centimeter Precision Geoid Model for Jeddah Region (Saudi Arabia)
In 2014, the Jeddah Municipality made a call for an estimate of a centimetric precision geoid model to be used for engineering and surveying applications, because the regional geoid model available at that time did not reach a sufficient precision. A project was set up to this end and dedicated sets of gravity and Global Positioning System (GPS)/levelling data were acquired in the framework of this project. In this paper, a thorough analysis of these newly acquired data and of the last available Global Gravity Field Models (GGMs) has been done in order to obtain a geoid undulation estimate with the prescribed precision. In the framework of the Remove–Compute–Restore (RCR) approach, the collocation method was used to obtain the height anomaly estimation that was then converted to geoid undulation. The remove and restore steps of the RCR approach were based on GGMs, derived from the Gravity Field and Steady-State Ocean Circulation Explorer (GOCE) and Gravity Recovery and Climate Experiment (GRACE) dedicated gravity satellite missions, which were used to improve the long wavelength components of the Earth’s gravity field. Furthermore, two different quasi-geoid collocation estimates were computed, based on gravity data only and on gravity plus GPS/levelling data (the so-called hybrid estimate). The best solutions were obtained with the hybrid geoid estimate. This was tested by comparison with an independent set of GPS/levelling geoid undulations that were not included in the computed solutions. By these tests, the precision of the hybrid geoid is estimated to be 3.7 cm. This precision proved to be better, by a factor of two, than the corresponding one estimated from the pure gravimetric geoid. This project has been also useful to verify the importance and reliability of GGMs developed from the last satellite gravity missions (GOCE and GRACE) that have significantly improved our knowledge of the long wavelength components of the Earth’s gravity field, especially in areas with poor coverage of terrestrial gravity data. In fact, the geoid models based on satellite-only GGMs proved to have a better performance, despite the lower spatial resolution with respect to high-resolution models (i.e., Earth Gravitational Model 2008 (EGM2008))73 216 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Theory of second order stationary random processes applied to GPS coordinate time-series
The analysis of Global Positioning System (GPS) coordinates time series is a valuable tool in quantifying crustal deformations. The longer continuous GPS time series allow estimation of nonlinear signatures. As a matter of fact, besides the linear and periodic behaviors, other relevant signals are present in such time series as the so-called transient deformations. They can be related to, e.g., slow slip events, which play a crucial role in studying fault mechanisms. To give reliable estimates of these signals, an appropriate and rigorous approach for defining the deterministic and the stochastic models of the data is needed. We prove that the theory of the second order stationary random process (SOSRP) can be used to describe the stochastic behavior of the daily GPS time series. In particular, the second order stationarity condition has to be verified for the daily GPS coordinate time series to be described as a SOSRP. This method has been already used for modeling the gravity field of the earth and in predicting/filtering problems, and this work shows that it can also be useful for characterizing the colored noise in the GPS time series.50 3 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , I finanziamenti europei alla ricerca in università e in enti pubblici di ricerca: aspetti organizzativi e informativi per il supporto al ciclo di vista del progetto
(2013-01); ; ; ; Rubbia, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione AC, Roma, ItaliaEuropean Union funding poses organizational challenges as well as requires adequate information management tools. Research support services have been set up in 90% of Italian universities, in the so-called Research Offices and in public research bodies, often in the International Relation Offices. The paper summarizes some considerations coming from state-of-the-art and illustrates the results of a dedicated survey which has been carried out on a sample of universities and research bodies of Italy. Both organizational structures to promote and manage the projects and features of information systems to support the whole project life-cycle are taken into account.1854 741 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Overview of the Italian strong Motion database ITACA 1.0
(2011-12); ; ; ; The Italian Strong Motion Database, ITACA, was developed within projects 2 S6 and S4, funded in the framework of the agreements between the Italian Department of 3 Civil Protection (Dipartimento della Protezione Civile, DPC) and the Istituto Nazionale di 4 Geofisica e Vulcanologia (INGV), starting from 2005. The alpha version of the database 5 was released in 2007 and subsequently upgraded to version 1.0 after: (i) including the most 6 recent strongmotion data (from2005 to 2007) recorded in Italy, in addition to the 2008 Parma 7 earthquake, M 5.4, and the M 4.0, 2009 Abruzzo seismic events; (ii) processing the raw 8 strong motion data using an updated procedure; (iii) increasing the number of stations with a 9 measured shear wave velocity profile; (iv) improving the utilities to retrieve time series and 10 ground motion parameters; (v) implementing a tool for selecting time series in agreement 11 with design-response spectra; (vi) compiling detailed station reports containing miscella12 neous information such as photo, maps and site parameters; (vii) developing procedures for 13 the automatic generation of station reports and for the updating of the header files. After such 14 improvements, ITACA 1.0 was published at the web site http://itaca.mi.ingv.it, in 2010. It 15 presently contains 3,955 three-component waveforms, comprising the most complete cata16 logue of the Italian accelerometric records in the period 1972–2007 (3,562 records) and the 17 strongest events in the period 2008–2009. Records were mainly acquired by DPC through its 18 Accelerometric National Network (RAN) and, in few cases, by local networks and temporary 19 stations or networks. This paper introduces the published version of the Italian StrongMotion 20 database (ITACA version 1.0) together with main improvements and new functionalities.248 2046 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Engineering ground motion record selection in the ITalian ACcelerometric Archive
(2011-12); ; ; ; Iervolino, I.; Università Federico II, NapoliThis paper introduces REXELite, an internet version of REXEL, a software for automatic selection of ground motion suites for nonlinear dynamic analysis of structures. REXELite was developed with the aim of integrating an advanced earthquake records’ repository, such as the ITalianACcelerometricArchive (ITACA), with a tool to define seismic input for engineering seismic analysis according to international standards (with priority to Europe). In fact, REXELite allows to define target design spectra according either to Eurocode 8 or to the Italian building code, and to search ITACA for suitable sets of seven records (comprised of one or two horizontal ground motion components) matching such target spectra: on average, in a user-specified period range, and with the desired tolerance. The records in the set also have, individually and according to some criteria, the most similar spectral shape with respect to that of the code. Selection options include magnitude, source-to-site distance, soil conditions and, if desired, linear scaling of records to reduce further record-to-record variability of the selected suite.This paper introduces REXELite, an internet version of REXEL, a software for automatic selection of ground motion suites for nonlinear dynamic analysis of structures. REXELite was developed with the aim of integrating an advanced earthquake records’ repository, such as the ITalianACcelerometricArchive (ITACA), with a tool to define seismic input for engineering seismic analysis according to international standards (with priority to Europe). In fact, REXELite allows to define target design spectra according either to Eurocode 8 or to the Italian building code, and to search ITACA for suitable sets of seven records (comprised of one or two horizontal ground motion components) matching such target spectra: on average, in a user-specified period range, and with the desired tolerance. The records in the set also have, individually and according to some criteria, the most similar spectral shape with respect to that of the code. Selection options include magnitude, source-to-site distance, soil conditions and, if desired, linear scaling of records to reduce further record-to-record variability of the selected suite.145 18 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Ground Motion Prediction Equations Derived from the Italian Strong Motion Database
(2011-12); ; ; ; We present a set of ground motion prediction equations (GMPEs) derived for the geometrical mean of the horizontal components and the vertical, considering the latest release of the strong motion database for Italy. The regressions are performed over the magnitude range 4–6.9 and considering distances up to 200 km. The equations are derived for peak ground acceleration (PGA), peak ground velocity (PGV) and 5%-damped spectral acceleration at periods between 0.04 and 2 s. The total standard deviation (sigma) varies between 0.34 and 0.38 log10 unit, confirming the large variability of ground shaking parameters when regional data sets containing small to moderate magnitude events (M < 6) are used. The between-stations variability provides the largest values for periods shorter than 0.2 s while, for longer periods, the between-events and between-stations distributions of error provide similar contribution to the total variability162 1892
