Skip to main content
The search returned 4 results
Now showing 1 - 4 of 4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Towards a National-Scale Dataset of Geotechnical and Hydrological Soil Parameters for Shallow Landslide Modeling

    One of the main constraints in assessing shallow landslide hazards through physically based models is the need to characterize the geotechnical parameters of the involved materials. Indeed, the quantity and quality of input data are closely related to the reliability of the results of every model used, therefore data acquisition is a critical and time-consuming step in every research activity. In this perspective, we reviewed all official certificates of tests performed through 30 years at the Geotechnics Laboratory of the Earth Science Department (University of Firenze, Firenze, Italy), compiling a dataset in which 380 points are accurately geolocated and provide information about one or more geotechnical parameters used in slope stability modeling. All tests performed in the past (in the framework of previous research programs, agreements of cooperation, or to support didactic activities) were gathered, homogenized, digitalized, and geotagged. The dataset is based on both on-site tests and laboratory tests, it accounts for 40 attributes, among which 13 are descriptive (e.g., lithology or location) and 27 may be of direct interest in slope stability modeling as input parameters. The dataset is made openly available and can be useful for scientists or practitioners committed to landslide modeling.
      192  139
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geotechnical and hydrological characterization of hillslope deposits for regional landslide prediction modeling

    We attempt a characterization of the geotechnical and hydrological properties of hillslope deposits, with the final aim of providing reliable data to distributed catchment-scale numerical models for shallow landslide initiation. The analysis is based on a dataset built up by means of both field tests and laboratory experiments over 100 sites across Tuscany (Italy). The first specific goal is to determine the ranges of variation of the geotechnical and hydrological parameters that control shallow landslide-triggering mechanisms for the main soil classes. The parameters determined in the deposits are: grain size distribution, Atterberg limits, porosity, unit weight, in situ saturated hydraulic conductivity and shear strength parameters. In addition, mineral phases recog- nition via X-ray powder diffraction has been performed on the different soil types. The deposits mainly consist of well-sorted silty sands with low plastic behavior and extremely variable gravel and clay contents. Statistical analyses carried on these geotechnical and hydrological parameters highlighted that it is not possible to define a typical range of values only with relation to the main mapped lithologies, because soil characteristics are not simply dependent on the bedrock type from which the deposits originated. A second goal is to explore the relationship between soil type (in terms of grain size distribution) and selected morphometric parameters (slope angle, profile curvature, planar curvature and peak distance). The results show that the highest correlation between soil grain size classes and morphometric attributes is with slope curvature, both profile and planar.
      331  162
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Fractionation processes affecting the stable carbon isotope signature of thermal waters from hydrothermal/volcanic systems: The examples of Campi Flegrei and Vulcano Island (southern Italy)

    The carbon isotopic composition of dissolved C-bearing species is a powerful tool to discriminate the origin of carbon in thermal waters from volcanic and hydrothermal systems. However, the δ13C values of dissolved CO2 and TDIC (Total Dissolved Inorganic Carbon) are often different with respect to the isotopic signature that characterizes the potential carbon primary sources, i.e. deep hydrothermal reservoirs, magmatic gases and organic activity. The most commonly invoked explanation for such isotopic values is related to mixing processes between deep and shallow end-members. Nevertheless, experimental and empirical investigations demonstrated that isotopic fractionation due to secondary processes acting on the uprising fluids from the hydrothermal reservoirs is able to reproduce the measured isotopic values. In this paper,we investigated the chemistry of thermalwaters, collected at Campi Flegrei and Vulcano Island (southern Italy),whose origin is related to interaction processesamongmagmatic gases, meteoric water, seawater and hosting rocks. A special focus was dedicated to the δ13C values of dissolved CO2 (δ13CCO2(aq)) and total dissolved inorganic carbon (δ13CTDIC). The δ13CCO2(aq) and δ13CTDIC values in the water samples fromboth these systems ranged from(i) those measured in fumarolic gases, likely directly related to the deep hydrothermal-magmatic reservoir, and (ii) those typically characterizing biogenic CO2, i.e. produced by microbially-driven degradation of organic matter. A simple mixingmodel of the two end-members, apparently explaining these intermediate carbon isotopic values, contrastswith the chemical composition of the dissolved gases. On the contrary, isotopic fractionation due to secondary processes, such as calcite precipitation, affecting hydrothermal fluids during their underground circulation, seems to exhaustively justify both the chemical and isotopic data. If not recognized, these processes, which frequently occur in volcanic and hydrothermal systems, may lead to an erroneous interpretation of the carbon source, causing an underestimation of the contribution of the hydrothermal/magmatic fluids to the dissolved carbon species. These results pose extreme caution in the interpretation of intermediate δ13CCO2(aq) and δ13CTDIC values for the assessment of the carbon budget of hydrothermal- volcanic systems.
      379  150
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    BARRIER EFFECT IN CO2 CAPTURE AND STORAGE FEASIBILITY STUDY

    CO2 Capture & Storage (CCS) in saline aquifer is one of the most promising technologies for reducing anthropogenic emission of CO2. Feasibility studies for CO2 geo-sequestration in Italy have increased in the last few years. Before planning a CCS plant an appropriate precision and accuracy in the prediction of the reservoir evolution during injection, in terms of both geochemical calculation and fluid flow properties, is demanded. In this work a geochemical model will be presented for an offshore well in the Tyrrhenian Sea where the injection of 1.5 million ton/year of CO2 is planned. The dimension of the trapping structure requires to study an area of about 100 km2 and 4 km deep. Consequently, three different simulations were performed by means of TOUGHREACT code with Equation Of State module ECO2N. The first simulation is a stratigraphic column with a size of 110*110*4,000 meters and a metric resolution in the injection/cap-rock area (total of 8,470 elements), performed in order to asses the geochemical evolution of the cap-rock and to ensure the sealing of the system. The second simulation is at large scale in order to assess the CO2 path from the injection towards the spill point (total of about 154,000 elements). During this simulation, the effect of the full coupling of chemistry with fluid flow and a relevant effect in the expected CO2 diffusion velocity was recognized. Owing to the effect of chemical reaction and coupling terms (porosity/permeability variation with mineral dissolution/precipitation), the diffusion velocity results to be 20% slower than in a pure fluid flow simulation. In order to give a better picture of this 'barrier' effect, where the diffusion of the CO2-rich acidic water into the carbonate reservoir originates a complex precipitation/dissolution area, a small volume simulation with a 0.1 m grid was elapsed. This effect may potentially i) have a big impact on CO2 sequestration due to the reduction of available storage volume reached by the CO2 plume in 20 years and/or the enhanced injection pressure and ii) outline the relevance of a full geochemical simulation in an accurate prediction of the reservoir properties.
      224  360