Skip to main content
The search returned 5 results
Now showing 1 - 5 of 5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    3D study of dyke-induced asymmetric graben: The 1971 Mt. Etna (Italy) case by structural data and numerical modelling

    In this work, we have integrated field data and numerical models to characterise a unique dyke-induced graben system, exposed both in section and plan view, with an unexpected asymmetric fault geometry. This volcanotectonic feature is related to the 1971 eruption of Mt. Etna (southern Italy) and is located near the northern wall of the Valle del Bove, a huge depression carved into the eastern flank of the edifice. A new structural map and quantitative data were obtained from the analysis of aerial stereophotos collected before the onset of the 1971 eruption and after, high-resolution drone-derived models and field surveys carried out in the summer of 2022. In plan view, the graben is 2-km-long and its width ranges 27-143 m from the bottom to the upper part of the section view, with about 82 m of difference in elevation from top to bottom. Graben faults clearly show an asymmetric setting in terms of attitude, with one fault that dips 70 • to the south, and the other one that dips 50 • to the north. Vertical offset values are greater at higher elevations. We also ran a set of numerical models, aimed at investigating the distribution and orientation of stresses around the inferred dyke tip and in the host rock. The comparison between field data and numerical models suggests a key role of the inclined topography, as shown in section view, in determining the orientation of dyke-induced σ 1 and σ 3 in the host rock. This, in turn, controls the geometry of the graben faults, resulting in the observed asymmetric setting. Additionally, dyke-induced stress concentrations and vertical offset values support the hypothesis of a downward propagation of the graben faults, from the surface down to the dyke tip.
      9  19
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Immersive Virtual Reality for Geo-education: feedback from students, academics and the lay public

    (egusphere-egu22-1151, 2022, 2022-05-23) ; ; ; ;
    Field-based classes in geological sciences are crucial components of geoscience education and research. Owing to the COVID-19 pandemic, such activities became problematic due to limitations such as travel restrictions and lockdown periods: this motivated the geoeducational community to tailor new ways to engage people in field activities. As a result, we adopted Immersive Virtual Reality as a tool to involve students, academics, and the lay public in field exploration, thus making geological exploration accessible also to people affected by permanent or temporary motor disabilities. In particular, we evaluated how users perceive the usefulness of this approach as applied to Earth Science learning and teaching, through nine outreach events, where a total of 459 participants were involved, with different ages and cultural backgrounds. The participants explored, in an immersive mode, four geological landscapes, defined as virtual geological environments, which have been reconstructed by cutting-edge, unmanned aerial system-based photogrammetry techniques. They include: Santorini (Greece), the North Volcanic Zone (Iceland), and Mt. Etna (Italy). After the exploration, each participant filled in an anonymous questionnaire. The results show that the majority would be willing to repeat the experience, and, most importantly, the majority of the students and Earth Science academics who took part in the navigation confirmed the usefulness of this technique for geo-education purposes. Our approach can be considered as a groundbreaking tool and an innovative democratic way to access information and experiences, as well as to promote inclusivity and accessibility in geo-education, while reducing travel costs, saving time, and decreasing the carbon footprint. This work has been carried out in the framework of the following projects: i) ACPR15T4_ 00098 “Agreement between the University of Milan Bicocca and the Cometa Consortium for the experimentation of cutting-edge interactive technologies for the improvement of science teaching and dissemination” of Italian Ministry of Education, University and Research (ARGO3D - https://argo3d.unimib.it/); ii) Erasmus+ Key Action 2 2017-1-UK01-KA203- 036719 “3DTeLC – Bringing the 3D-world into the classroom: a new approach to Teaching, Learning and Communicating the science of geohazards in terrestrial and marine environments” (http://3dtelc.lmv.uca.fr/; https://www.3dtelc.com/); iii) 2018 EGU Public Engagement Grants (https://www.egu.eu/outreach/peg/).
      66  128
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A New Way to Explore Volcanic Areas: QR-Code-Based Virtual Geotrail at Mt. Etna Volcano, Italy

    In this body of work, we showcase a historic virtual geotrail on the eastern flank of the iconic Mt. Etna volcano (Italy), along a series of outstanding geological sites and features subsequent to an important eruption that took place in 1928. A geohistoric account of such a major eruption, is of great interest, since it is the only event since 1669 to have caused the destruction of a town (Mascali) in the Etna region. Volcanologists, educators, the lay public, tourists and volcano explorers can now access a series of “virtual geostops” belonging to this virtual geotrail, such that “visitors” can virtually fly above these sites by scanning a QR code on the printed or electronic version of the present manuscript, as well as on the poster provided as additional material for this manuscript. The virtual geostops that comprise the virtual geotrail were developed using the structure-frommotion (SfM) photogrammetry technique from images captured by using unmanned aerial vehicles (UAVs). The main result of our work is the virtual geotrail, subdivided in two parts and composed of eight geostops, each showing outstanding examples of geological features resulting from volcanic phenomena that took place also during 1979. Our approach is designed to support classical field trips, and it can undoubtedly become complementary to traditional field teaching in earth sciences, both now and in the future.
      287  142
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    How Academics and the Public Experienced Immersive Virtual Reality for Geo-Education

    Immersive virtual reality can potentially open up interesting geological sites to students, academics and others who may not have had the opportunity to visit such sites previously. We study how users perceive the usefulness of an immersive virtual reality approach applied to Earth Sciences teaching and communication. During nine immersive virtual reality-based events held in 2018 and 2019 in various locations (Vienna in Austria, Milan and Catania in Italy, Santorini in Greece), a large number of visitors had the opportunity to navigate, in immersive mode, across geological landscapes reconstructed by cutting-edge, unmanned aerial system-based photogrammetry techniques. The reconstructed virtual geological environments are specifically chosen virtual geosites, from Santorini (Greece), the North Volcanic Zone (Iceland), and Mt. Etna (Italy). Following the user experiences, we collected 459 questionnaires, with a large spread in participant age and cultural background. We find that the majority of respondents would be willing to repeat the immersive virtual reality experience, and importantly, most of the students and Earth Science academics who took part in the navigation confirmed the usefulness of this approach for geo-education purposes.
      244  127
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surface deformation during the 1928 fissure eruption of Mt. Etna (Italy): Insights from field data and FEM numerical modelling

    The 1928 CE volcanic activity on eastern Etna, Italy, produced wide surface deformation and high effusion rates along fissures, with excess volumes of about 50 million m3 of lavas. This, in conjunction with the low elevation of the main eruptive vents (1150 m a.s.l.), caused the destruction of the Mascali town. Our research focuses on a multidisciplinary study from field observations and Finite Element Method modelling through COMSOL Multiphysics ®, with the aim of reconstructing the geometry, kinematics and origin of the system of faults and fissures formed during the 1928 event. We collected quantitative measurements from 438 sites of azimuth values, opening direction and aperture amount of dry fissures, and attitude and vertical offsets of faults. From west to east, four volcanotectonic settings have been identified, related to dike propagation in the same direction: 1) a sequence of 8 eruptive vents, surrounded by a 385-m wide graben, 2) a 2.5-km long single eruptive fissure, 3) a half-graben as wide as 74 m and a symmetric, 39-m-wide graben without evidence of eruption, 4) alignment of lower vents along the pre-existing Ripe della Naca faults. Field data, along with historical aerial photos, became inputs to FEM numerical models. The latter allowed us to investigate the connection between diking and surface deformation during the 1928 event, subject to a range of overpressure values (1–20 MPa), host rock properties (1–30 GPa) and geometrical complexity (stratigraphic sequence, layer thickness). In addition, we studied the distribution of tensile and shear stresses above the dike tip and gained insights into dike-induced graben scenarios. Our multidisciplinary study reports that soft (e.g. tuff) layers can act as temporary stress barriers and control the surface deformation scenarios (dike-induced graben, single fracture or eruptive fissures) above a propagating dike by suppressing the distribution of shear stresses towards the surface.
      799  88