Grasso, Carmine
Preferred name
Grasso, Carmine
Email
carmine.grasso@ingv.it
ORCID
6 results
Filters
Settings
The search returned 6 results
Now showing 1 - 6 of 6
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , New Concept of Smart UAS-GCP: A Tool for Precise Positioning in Remote-Sensing Applications
Today, ground control points (GCPs) represent indispensable tools for products’ georeferencing in all the techniques concerning remote sensing (RS), particularly in monitoring activities from unmanned aircraft system (UAS) platforms. This work introduces an innovative tool, smart GCPs, which combines different georeferencing procedures, offering a range of advantages. It can serve three fundamental purposes concurrently: (1) as a drone takeoff platform; (2) as a base station, allowing the acquisition of raw global navigation satellite system (GNSS) data for post-processed kinematic (PPK) surveys or by providing real-time GNSS corrections for precision positioning; (3) as a rover in the network real-time kinematic (NRTK) mode, establishing its position in real time with centimetric precision. The prototype has undergone testing in a dedicated study area, yielding good results for all three geodetic correction techniques: PPK, RTK, and GCP, achieving centimeter-level accuracy. Nowadays, this versatile prototype represents a unique external instrument, which is also easily transportable and able to connect to the GNSS RING network, obtaining real-time positioning corrections for a wide range of applications that require precise positioning. This capability is essential for environmental applications that require a multitemporal UAS-based study. When the real-time RING data are accessible to the scientific community operating in RS surveying, this work could be a helpful guide for researchers approaching such investigations.106 144 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , New Advances Towards Early Warning Systems in the Mediterranean Sea Using the Real-Time RING GNSS Research Infrastructure
(Basel : Molecular Diversity Preservation International, 2025-11-07); ; ; ; Du, ShiNowadays, information obtained through Global Navigation Satellite Systems (GNSSs) is widely employed in modern geodesy. The Precise Point Positioning (PPP) approach, which leverages signals from multiple GNSS constellations (e.g., GPS, GLONASS, Galileo, and BeiDou), enables high-precision positioning—crucial for seismic monitoring and early tsunami warning systems (EEWs). Recent advances, such as increased satellite availability and additional frequency bands, have significantly improved PPP performance, particularly in terms of positioning accuracy and convergence time. This study focuses on the Rete Integrata Nazionale GNSS (RING) network, managed by the Istituto Nazionale di Geofisica e Vulcanologia (INGV), which comprises dual-frequency GNSS receivers distributed across the Italian peninsula and parts of the Mediterranean Basin. We evaluate the performance show that the PPP-RA approach enhances positioning accuracy and reduces convergence time, especially when comparing GPS-only datasets with those incorporating full multi- GNSS configurations. For the daily solution, in the optimal setup (i.e., full GNSS with RA), real-time solutions exhibit average accuracies of 2.05, 1.73, and 4.35 cm for the North, East, and vertical components, respectively. Sub-daily accuracies’ analysis, using 300 s sliding windows, showed even better uncertainties, exhibiting median values of 0.41, 0.32, and 0.9 cm for the North, East and vertical components, respectively. Based on the outcomes for network-wide sub-daily accuracies, 84% of the stations demonstrate average errors within 2 cm for North and East components and 3 cm for the vertical one. The analysis on the convergence time after data gaps occurred during the investigation period shows that 87% of the RING stations experienced convergence times lower than five minutes in the GNSS PPP-RA solution. These findings underscore the potential of RT-GNSS RING data for enhancing seismic monitoring and early warning systems, particularly in tectonically active regions. of the RING data (GPS and GNSS) acquired in a period of three weeks between 19 January 2024 and 9 February 2024 and analyzed in real time by using different PPP strategies: standard PPP and PPP with Regional Augmentation (PPP-RA). The preliminary results6 14 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , GNSS-RTT (GNSS - Real Time Tracker), a Software System For Real Time GNSS Data Acquisition, Processing And Visualization
(2023-07-11); ;Famiglietti, Nicola Angelo; ; During any emergency response, the real-time GNSS data analysis strategies based on differential approach (i.e. Real Time Kinematic) needs some crucial a-priori information on the reference stations. In addition to their location in an undeformed area, this choice can be also influenced by other parameters (RMS of the time series, battery voltages, transmission on/off, number of visible satellites, etc.). For this reason, we developed an intelligent homemade algorithm BC-RTK (Base Choice - RTK) able to choose the more reliable baselines to potentially provide the best RTK results, it defines stations’ priority to the real-time GNSS analysis whose results are stored in a time-series database. This algorithm is a part of a software, called GNSS-RTT(Global Navigation Satellite System - Real Time Tracker), developed in 2022/2023. It is an open source software that can be either connected to different GNSS receivers through a different type of connection (Tcp/ip, Ntrip, etc.) or linked to a Ntrip Caster. For the solutions, it is able to get the data in different formats (NMEA, LLH,XYZ, etc.) and at different sampling frequencies up to 200 Hz. The data is stored in an optimized database called InfluxDB(https://www.influxdata.com) for real-time and IoT applications. It was developed to manage the data efficiently, allowing both real-time and post-processed visualization. The visualization is performed by means of web applications, such as Grafana (https://grafana.com) or Chronograf (https://www.influxdata.com/time-series-platform/chronograf). We will describe the technical aspects relating to the presented software and some preliminary results in test cases.3 12 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , UAS-LC-GNSS: Precision Surveying with a Low-Cost GNSS System for Commercial Drones
INGV (National Institute of Geophysics and Volcanology, Italy) is one of the institutions that studies and monitors the geophysical phenomena (earthquakes, volcanic eruptions, landslides, etc.) that occur on Earth. During these events, it is essential to carry out a large, detailed and fast map of the aected areas. If we think of the diculties encountered during the mapping of the fault sources for the 2016 earthquake in central Italy, we can understand how the UAS (Unmanned Aircraft System) can be a valid “low-cost” alternative to the traditional methods of surveys. These devices, thanks to precision instrumentation such as GNSS (Global Navigation Satellite Systems) receivers and IMU (Inertial Measurement Unit) control units, allow a detailed reconstruction of the investigated areas, especially for small-scale analysis applications. These aircraft are based on multiple technologies and show great investigative capabilities, therefore they must be considered as complete systems.Starting from these concepts, we have developed a low-cost RTK/PPK (Real Time Kinematic/Post Processing Kinematic) GNSS survey system on “commercial” UAVs (Unmanned Aerial Vehicles), i.e. professional drones that are not created to be modified. We have demonstrated how the integration of a GNSS RTK/PPK module on commercial UAVs makes the system ecient for the reconstruction of a highly detailed and precise DEM (Digital Elevation Model), without using GCP (Ground Control Point), allowing to make precision measurements in areas that are dicult to explore and investigate. Indeed, the altimetric trends of the PPK processing without GCPs are perfectly comparable with those of the PVs (Verification Points) deriving from RTK analysis and sshow small acceptable deviations. The height dierences between PVs measurements and those deriving from the DEM in the same planar coordinates vary between a minimum of 1 cm and a maximum of 7.8 cm. Based on these results, we can state that the precision mapping with a drone equipped with an on-board GNSS module does not dier much from the technique that involves measuring GCP on the ground, in reality, it is comparable in terms of errors, even on the more dicult field of altitudes.143 152 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A Test on the Potential of a Low Cost Unmanned Aerial Vehicle RTK/PPK Solution for Precision Positioning
This paper investigated the achievable accuracy from a low-cost RTK (Real Time Kinematic)/PPK (Post Processing Kinematic) GNSS (Global Navigation Satellite Systems) system installed on board a UAV (Unmanned Aerial Vehicle), employing three different types of GNSS Bases (Alloy, RS2 and RING) working in PPK mode. To evaluate the quality of the results, a set of seven GCPs (Ground Control Points) measured by means of the NRTK (Network Real Time Kinematic) technique was used. The outcomes show a RMSE (Root Mean Square Error) of 0.0189 m for an ALLOY Base, 0.0194 m for an RS2 Base and 0.0511 m for RING Base, respectively, on the vertical value of DEMs (Digital Elevation Models) obtained by a photogrammetric process. This indicates that, when changing the Base for the PPK, the solutions are different, but they can still be considered adequate for precision positioning with UAVs, especially when GCPs could be used with some difficulty. Therefore, the integration of a RTK/PPK GNSS module on a UAV allows the reconstruction of a highly detailed and precise DEM without using GCPs and provides the possibility to carry out surveys in inaccessible areas.227 157 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Real-time GPS vs full-GNSS time series accuracies estimations at RING INGV research infrastructure
(Copernicus GmbH, 2025-01-20); ; ; ;Shi, DuThe RING (Rete Integrata Nazionale GNSS) is a research infrastructure developed for accurately measuring deformations at different spatial and temporal scales in the Eurasia-Africa plate boundary region (Avallone et al., 2010). Currently, the RING network (http://ring.gm.ingv.it/) is composed of 280 real-time transmitting remote sites, 70% of which are now equipped with full-GNSS (GPS, Galileo, Glonass and Beidou) instrumentation. The data streaming, in standard RTCM v.3 format, from these sites to the acquisition centre in southern Italy (Sezione Irpinia, Grottaminarda, AV) is managed by a tuned Ntrip Caster (https://igs.bkg.bund.de/ntrip/bkgcaster). The typical magnitude of the strongest events that occurred in the last century in this region (5.5-7) should require high accuracy (2-3 cm) GPS/GNSS time series to properly observe both static and dynamic coseismic displacements and, then, to properly model the earthquake source. Furthermore, the detection of any afterslip or, in general, any transient deformation should require even better accuracy (< 2 cm). The real-time GPS/GNSS data analysis has been implemented by means of the RTPPP software developed by GFZ (Ge et al., 2012). This software allows the determination of various Precise Point Positioning products with increasing accuracy (standard PPP, PPP with ambiguity resolution [PPP-AR], and PPP with regional augmentation [PPP-RA]). We performed some preliminary investigations on different (limited in time) datasets and we compared GPS-only and full-GNSS results. In the case of GPS-only PPP-RA solutions, the accuracies estimated on 24-hour data for the whole network amount up to 1.7 cm and 6 cm for the horizontal and vertical components, respectively. In the case of full-GNSS solutions, the same approach (PPP-RA) allowed an improvement of about 22% on both horizontal and vertical components (1.3 cm and 4.6 cm). Furthermore, we compared both GPS-only and full-GNSS solutions with another method, i.e. by using a short-term accuracy analysis. Using 60-s or 120-s sliding windows, that should better simulate the time span for detecting coseismic displacements, we can achieve 0.5 cm and 1 cm for horizontal and vertical components, respectively, for GPS-only solutions, and 0.3 cm and 0.5 cm for full-GNSS ones. Finally, for a few examples of earthquakes that recently occurred in Italy, we will show comparisons between post processed high-rate solutions carried out by Gipsy-Oasis II solutions and those obtained by RTPPP simulating real-time time series. The obtained accuracies will demonstrate the reliability of the RING infrastructure real-time GNSS solutions for early warning and rapid response applications.6 13
