Skip to main content
The search returned 16 results
Now showing 1 - 10 of 16
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Review of European examples of seismic traffic light systems and their suitability for onshore carbon storage monitoring

    (Amsterdam : Elsevier B.V., 2026-09) ; ;
    Langet, Nadège
    ;
    ;
    Keil, S
    Traffic light systems (TLS) are commonly used for monitoring seismicity induced by subsurface operations, including geothermal energy, wastewater injection, and increasingly, enhanced oil recovery as well as carbon capture and storage (CCS). TLS frameworks typically define thresholds for seismic parameterssuch as magnitude or ground motionand specify response actions when thresholds are exceeded. However, current TLS implementations often rely on empirical single-parameter rules and lack mechanisms to account for uncertainties in monitoring data, seismic location, or network coverage. These limitations may lead to overly conservative or delayed responses, particularly in data-sparse environments typical of many CCS sites. This paper reviews established seismic TLS frameworks and assesses their suitability for application to CCS monitoring. Differences in operational contextsuch as fluid compressibility, offshore placement, and lower seismicity ratesmean that TLS elements developed for geothermal or wastewater injection cannot be transferred to CCS without modification. We highlight the importance of considering multi-parameter decision logic, pre-operational baselines, and real-time processing constraints. We further note that hybrid monitoring networks, combining borehole and surface sensors, as well as physics-based simulations of ground motion, may offer promising avenues to improve detectability, location precision, and uncertainty handling in CCS contexts. Finally, we underline the importance of communication design and public trust in TLS effectiveness, especially in light of surveys showing public concern around CCS-related seismicity. We conclude with specific recommendations for improving TLS frameworks to better support risk-informed, transparent monitoring of CCS operations.
      15
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    AdriaArray – a Passive Seismic Experiment to Study Structure, Geodynamics and Geohazards of the Adriatic Plate

    (Bologna : INGV, Istituto nazionale di geofisica e vulcanologia, Sezione di Bologna, 2010-, 2025-09-29) ; ; ;
    Almir Bijedić
    ;
      4  10
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The use of 6DOF measurement in volcano seismology – A first application to Stromboli volcano

    Volcano seismology, while its value for surveillance of an active volcano is undebatable, is a very demanding field when it comes to station deployment, maintenance, and finally interpreting the measurements. Most valuable in the past was the deployment of arrays of sensors to evaluate the properties of the entire wavefield in order to classify, locate, and estimate the dominant mechanism of the corresponding sources. While very beneficial, an array of seismographs is very hard to maintain in a permanent installation at an active volcano. With the advent of new instrumentation based on fiber optic technology such as Distributed Acoustic Sensing (DAS) with fiber optic cables as well as Fiber-Optic Gyroscopes (FOG) the measurement of deformation and rotation, i.e., the gradient of the wavefield is feasible. The advantage of the FOG instrumentation with respect to DAS lies in the portability and ease of deployment, which is very similar to standard deployments of traditional seismometers. During a field campaign in summer 2018 we were able to install three FOGs together with classical broadband seismometers in close proximity to the active vents of Stromboli volcano (Italy). We show that with this new six-degrees-of-freedom (6DOF) measurement we are able to analyze the wavefield composition, a property normally reserved for array(s) of seismic sensors. As a first result, we can support earlier array-derived findings that a large portion of the wavefield at Stromboli volcano is formed by SV- and SH- type waves. We also present first locations of these signals facilitating the polarization properties of the combined measurement of gyroscopes and seismometers. They emphasize the benefit of recording wavefield gradients. In addition to these array-like results, the 6DOF recordings show a clear separation of at least three distinct groups of volcanic events of which two are already known and one represents a jetting event that appears nearly invisible for classical seismometers. However, rotational motions - or more general - gradients of the wavefield experience severe distortions by local velocity fluctuations and topography significantly complicating the application of 6DOF techniques at activate volcanoes.
      88  76
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Shear wave splitting in the Alpine region

    To constrain seismic anisotropy under and around the Alps in Europe, we study SKS shear wave splitting from the region densely covered by the AlpArray seismic network. We apply a technique based on measuring the splitting intensity, constraining well both the fast orientation and the splitting delay. Four years of teleseismic earthquake data were processed, from 723 temporary and permanent broad-band stations of the AlpArray deployment including ocean-bottom seismometers, providing a spatial coverage that is unprecedented. The technique is applied automatically (without human intervention), and it thus provides a reproducible image of anisotropic structure in and around the Alpine region. As in earlier studies, we observe a coherent rotation of fast axes in the western part of the Alpine chain, and a region of homogeneous fast orientation in the Central Alps. The spatial variation of splitting delay times is particularly interesting though. On one hand, there is a clear positive correlation with Alpine topography, suggesting that part of the seismic anisotropy (deformation) is caused by the Alpine orogeny. On the other hand, anisotropic strength around the mountain chain shows a distinct contrast between the Western and Eastern Alps. This difference is best explained by the more active mantle flow around the Western Alps. The new observational constraints, especially the splitting delay, provide new information on Alpine geodynamics. © 2021 The Author(s) 2021. Published by Oxford University Press on behalf of The Royal Astronomical Society.
      1638  209
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Multidisciplinary analysis of the deadly snow avalanche of 18 January 2017 at Rigopiano (Central Italy)

    On January 2017, a snow avalanche devastated a Resort-hotel in the municipality of Rigopiano in Abruzzo (Central Italy), unfortunately killing 29 people. Due to the bad weather conditions, no visual observation was made; many are the questions and hypotheses around this tragic event. On-site inspections revealed that the hotel was horizontally cut by shear forces and dislocated by 48 m in 70°N direction, once the increasing avalanche pressure exceeded the structural shear strength of the building. Analyses of phone calls and inspections of the victims’ mobile phones revealed that the avalanche struck sometime between 15:40 and 15:54 (UTC). Within this eligible 24 min time window, we scanned regional seismograms for any “suspicious” signal that could have been generated by the avalanche and found three weak seismic transients, starting at 15:42:38 UTC, recorded by the nearest operating station GIGS located in the Gran Sasso underground laboratory at a distance of approximately 17 km from Rigopiano. Directional analysis of the strongest seismic avalanche signal, as well as of the synthetic seismograms, match best when assuming a single force seismic source, attacking in direction of 120°N. Hundreds of simulations of the avalanche dynamics – calculated by using a 2D rapid mass movement simulator – indicate that the seismic signals were rather generated as the avalanche flowed through a narrow and twisting canyon directly above the hotel. Once the avalanche enters the canyon it is travelling at maximum velocity (37 m/s) and is twice strongly deflected by the rock sidewalls. These impacts created a distinct linearly polarized seismic “avalanche transient” that had be used to time the destruction of the hotel. Concluding, the avalanche of Rigopiano detached at 15:41:59 (UTC), entered in a canyon (15:42:35), entrained trees and boulders - increasing the mass significantly - an hit the hotel on 15:43:20 at a speed of 100 km/h.Our results demonstrate that seismic recordings combined with simulations of mass movements are indispensable to remotely monitor snow avalanches.
      41  101
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic signature of the deadly snow avalanche of January 18, 2017, at Rigopiano (Italy)

    Most snow avalanches occur unobserved, which becomes particularly dramatic when human lives are involved. Seismological observations can be helpful to unravel time and dynamics of unseen events, like the deadly avalanche of January 18, 2017, that hit a Resort-hotel at Rigopiano in the Abruzzi (Italy). Particle motion analysis and spectrograms from data recorded by a close seismic broadband station, calculation of synthetic seismograms, as well as simulation of the flow, allowed us to construct the dynamics of the snow avalanche that buried alive 40 people, killing 29. Due to the bad weather conditions, no visual observation was made, thus making it impossible to determine the exact moment of the avalanche and to report necessary observations of the dramatic event. On-site inspections revealed that the hotel was horizontally cut by shear forces and dislocated by 48 m in 70°N direction, once the increasing avalanche pressure exceeded the structural shear strength of the building. Within an eligible 24 min time range of the avalanche, we found three weak seismic transients, starting at 15:42:38 UTC, recorded by the nearest operating station GIGS located in the Gran Sasso underground laboratory approximately 17 km away. Particle motion analysis of the strongest seismic avalanche signal, as well as of the synthetic seismograms match best when assuming a single force seismic source, attacking in direction of 120°N. Simulation of the avalanche dynamics-calculated by using a 2D rapid mass movement simulator-indicates that the seismic signals were rather generated as the avalanche flowed through a narrow and twisting canyon directly above the hotel. Once the avalanche enters the canyon it is travelling at maximum velocity (37 m/s) and is twice strongly deflected by the rock sidewalls. These impacts created a distinct linearly polarized seismic "avalanche transient"s that can be used to time the destruction of the hotel. Our results demonstrate that seismic recordings combined with simulations of mass movements are indispensable to remotely monitor snow avalanches. Seismology provides useful tools that can help to better understand the dynamics of seismic events, different from earthquakes, as e.g. volcanic eruptions, rock falls or huge landslides 1-5. There are only a few examples in literature where seismology was successfully used to study avalanches 6-10 , probably because the density of snow is up to ten times smaller, compared to debris, which results in a reduced ground coupling and in a smaller seismic signal amplitude. On January 18, 2017, in a remote location in the Abruzzo region (Central Italy), a deadly avalanche buried 40 people under the Resort-hotel "Rigopiano". In a dramatic rescue operation 11 people could be recovered, while for another 29 persons there was no way to escape. The bad weather conditions with heavy snowfall closed the access road, isolating the Rigopiano location from the outside world. The reduced visibility prevented any eyewitness report of the avalanche, thus the exact moment, as well as the dynamics of this catastrophic event, are still not confirmed. We use seismic recordings and on-site inspection, combined with numerical modelling, to reconstruct the dynamics and to determine the exact moment of the deadly avalanche.
      166  263
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Six Degree-of-Freedom Broadband Ground-Motion Observations with Portable Sensors: Validation, Local Earthquakes, and Signal Processing

    The additional observation of three components of rotational ground motions has benefitsfor tilt-seismometer coupling (e.g., ocean-bottom seismometry and volcano seismology),local site characterization, wavefield separation, source inversion, glacial and planetaryseismology, as well as the monitoring of structural health. Field applications have beenmostly hampered by the lack of portable sensors with appropriate broadband operationrange and weak-motion sensitivity. Here, we present field observations of the firstcommercial portable broadband rotation sensor specifically designed for seismology.The sensor is a three-component fiber-optic gyro strictly sensitive to ground rotation only.The sensor field performance and records are validated by comparing it with both arrayderivedrotation measurements and a navigation-type gyro. We present observations ofthe 2018 Mw 5.4 Hualien earthquake and the 2016 central Italy earthquake sequence.Processing collocated rotation and classical translation records shows the potential inretrieving wave propagation direction and local structural velocity from point measurementscomparable to small-scale arrays of seismic stations. We consider the availabilityof a portable, broadband, high sensitivity, and low self-noise rotation sensor to be a milestonein seismic instrumentation. Complete and accurate ground-motion observations(assuming a rigid base plate) are possible in the near, local, or regional field, openingup a wide range of seismological applications.
      169  13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Listening the Womb of the Earth: iXblue sonars, transponder and rotational seismometers for extreme environment imaging and monitoring

    iXblue company develops technologies to listen and image the Earth dynamics. Among them, Echoes high-resolution sub-bottom profilers, Seapix 3D multibeam echosounder, Canopus transponder and blueSeis rotational seismometers are particularly useful for imaging and monitoring marine and continental volcanic activities. Here, we present recent implementations and acquisitions of those systems, demonstrate the great potential of these technologies to record present and past volcanic dynamics in Hawaii, Stromboli, Sicilia and Eifel region, and emphasize their benefits to better anticipate volcanic hazard. The Hawaii island experienced a dramatic volcanic crisis during the summer of 2018. To demonstrate the potential of observing the complete ground motion in the nearfield of seismic sources, Geophysical Observatory (LMU, Munich, Germany), in cooperation with USGS Hawaiian Volcano Observatory (USA), installed a high sensitive rotational motion sensor (blueSeis-3A) near the erupting crater returning spectacular data for almost daily M5 seismic events due to the collapse of the caldera. BlueSeis-3A, based on fiber optical gyroscope technology, at very close distance from the Stromboli volcano in 2016 and 2018, was installed together with classical instrumentation (i.e., translational seismometer, infra sound and tilt meter) and recorded four weeks of permanent strombolian activity at Stromboli during these two experiments. The resulting six axis measurements reveal clear rotations around all three-coordinate axis. We are furthermore able to demonstrate how these six component measurements can helpto improve solving the inversion problem on large and complex system like volcanoes. Eight Canopus transponders are involved in an ERC project in underwater geodesy, the FOCUS project headed by IUEM laboratory (Brest, France). Together with a 6 km-longoptical fiber deployed across the trench at the base of the Etna volcano, two groups of four Canopus will be installed on tripods each side of the trench at 1500-2000 m of water depth. This will help quantify the speed of the southeastern flank collapsing of Etna volcano into the Ionian Sea.In collaboration with French, Belgian and German geoscience laboratories, Echoes 10 000 (10 kHz) sub-bottom profiler and Seapix 3D multibeam echosounder, both installed on the kiXkat cataraft and remotely controlled, were mobilized to produce images of the water column and sediments of a lake formed in a volcanic crater in Germany (Laacher See). By using Seapix to obtain backscatter profiles of elements in the water column, it was possible to clearly distinguish fish and gas bubbles, which demonstrates a potential for the development of an automatic gas detection module using the Seapix software. Meanwhile, the Echoes 10 000 provided high-resolution images of the architecture of the lake deposits and visualized in real time using Delph Software. More than 30 m of penetration with a theoretical 8 cm-resolution highlight paleoenvironmental and paleoclimatic reconstruction perspectives and 3D modeling of remobilized materials and tephra deposits from volcanic activity.
      40  172
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Global quieting of high-frequency seismic noise due to COVID-19 pandemic lockdown measures

    Human activity causes vibrations that propagate into the ground as high-frequency seismic waves. Measures to mitigate the coronavirus disease 2019 (COVID-19) pandemic caused widespread changes in human activity, leading to a months-long reduction in seismic noise of up to 50%. The 2020 seismic noise quiet period is the longest and most prominent global anthropogenic seismic noise reduction on record. Although the reduction is strongest at surface seismometers in populated areas, this seismic quiescence extends for many kilometers radially and hundreds of meters in depth. This quiet period provides an opportunity to detect subtle signals from subsurface seismic sources that would have been concealed in noisier times and to benchmark sources of anthropogenic noise. A strong correlation between seismic noise and independent measurements of human mobility suggests that seismology provides an absolute, real-time estimate of human activities.
      296  116
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    6C Recordings at Active Volcanoes

    Near field recordings and thus finite source inversions of volcano-induced events often suffer from unaccounted effects of local tilt, saturation of classical instrumentation, unknown shallow velocity structure and doubtful orientation of the instruments. In addition, if the station number is limited the results of moment tensor inversions are very often not well constrained. Recent advances in hardware development made it possible to install several very broadband, high sensitive rotational motion sensor, based on fibre optical gyroscope technology, in very close distance of an activate volcano, i.e. on Stromboli volcano in 2016 and 2018, respectively. Using this new instrument together with classical instrumentation (i.e., translational seismometer, infra sound and tilt meter) we were able to record four weeks of permanent strombolian activity at Stromboli during these two experiments. The resulting six axis measurements reveal clear rotations around all three coordinate axis. We are furthermore able to demonstrate how this six axis measurements can help to improve the location procedure due to the property of a fiver optic gyro to act as a physical wave polariser. We also demonstrate the application of a single site shallow velocity estimation using volcanic background noise only, which will further improve the reliability of the source mechanism estimate. As a concluding step we will demonstrate how the use of sparse 6C measurement might be able to reduce the ambiguity of moment tensor inversions of volcano related signals.
      64  97