Skip to main content
The search returned 14 results
Now showing 1 - 10 of 14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Dual-Wavelength Polarimetric Lidar Observations of the Volcanic Ash Cloud Produced during the 2016 Etna Eruption

    Lidar observations are very useful to analyse dispersed volcanic clouds in the troposphere mainly because of their high range resolution, providing morphological as well as microphysical (size and mass) properties. In this work, we analyse the volcanic cloud of 18 May 2016 at Mt. Etna, in Italy, retrieved by polarimetric dual-wavelength Lidar measurements. We use the AMPLE (Aerosol Multi-Wavelength Polarization Lidar Experiment) system, located in Catania, about 25 km from the Etna summit craters, pointing at a thin volcanic cloud layer, clearly visible and dispersed from the summit craters at the altitude between 2 and 4 km and 6 and 7 km above the sea level. Both the backscattering and linear depolarization profiles at 355 nm (UV, ultraviolet) and 532 nm (VIS, visible) wavelengths, respectively, were obtained using different angles at 20◦ , 30◦ , 40◦ and 90◦ . The proposed approach inverts the Lidar measurements with a physically based inversion methodology named Volcanic Ash Lidar Retrieval (VALR), based on Maximum-Likelihood (ML). VALRML can provide estimates of volcanic ash mean size and mass concentration at a resolution of few tens of meters. We also compared those results with two methods: Single-variate Regression (SR) and Multi-variate Regression (MR). SR uses the backscattering coefficient or backscattering and depolarization coefficients of one wavelength (UV or VIS in our cases). The MR method uses the backscattering coefficient of both wavelengths (UV and VIS). In absence of in situ airborne validation data, the discrepancy among the different retrieval techniques is estimated with respect to the VALR ML algorithm. The VALR ML analysis provides ash concentrations between about 0.1 µg/m3 and 1 mg/m3 and particle mean sizes of 0.1 µm and 6 µm, respectively. Results show that, for the SR method differences are less than <10%, using the backscattering coefficient only and backscattering and depolarization coefficients. Moreover, we find differences of 20–30% respect to VALR ML, considering well-known parametric retrieval methods. VALR algorithms show how a physics-based inversion approaches can effectively exploit the spectral-polarimetric Lidar AMPLE capability.
      198  79
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Tephra Mass Eruption Rate From Ground-Based X-Band and L-Band Microwave Radars During the November 23, 2013, Etna Paroxysm

    The morning of November 23, 2013, a lava fountain formed from the New South-East Crater (NSEC) of Mt. Etna (Italy), one of the most active volcanoes in Europe. The explosive activity was observed from two ground-based radars, the X-band polarimetric scanning and the L-band Doppler fixed-pointing, as well as from a thermal-infrared camera. Taking advantage of the capability of the microwave radars to probe the volcanic plume and extending the volcanic ash radar retrieval (VARR) methodology, we estimate the mass eruption rate (MER) using three main techniques, namely surface-flux approach (SFA), mass continuity-based approach (MCA), and top-plume approach (TPA), as well as provide a quantitative evaluation of their uncertainty. Estimated exit velocities are between 160 and 230 m/s in the paroxysmal phase. The intercomparison between the SFA, MCA, and TPA methods, in terms of retrieved MER, shows a fairly good consistency with values up to 2.4 x 10⁶ kg/s. The estimated total erupted mass (TEM) is 3.8 x 10⁹, 3.9 x 10⁹, and 4.7 x 10⁹ kg for SFA with L-band, X-band, and thermal-infrared camera, respectively. Estimated TEM is between 1.7 x 10⁹ kg and 4.3 x 10⁹ for TPA methods and 3.9 x 10⁹ kg for the MCA technique. The SFA, MCA, and TPA results for TEM are in fairly good agreement with independent evaluations derived from ground collection of tephra deposit and estimated to be between 1.3 ± 1.1 x 10⁹ and 5.7 x 10⁹ kg. This article shows that complementary strategies of ground-based remote sensing systems can provide an accurate real-time monitoring of a volcanic explosive activity.
      341  105
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A Multi-Sensor Approach for Volcanic Ash Cloud Retrieval and Eruption Characterization: The 23 November 2013 Etna Lava Fountain

    Volcanic activity is observed worldwide with a variety of ground and space-based remote sensing instruments, each with advantages and drawbacks. No single system can give a comprehensive description of eruptive activity, and so, a multi-sensor approach is required. This work integrates infrared and microwave volcanic ash retrievals obtained from the geostationary Meteosat Second Generation (MSG)-Spinning Enhanced Visible and Infrared Imager (SEVIRI), the polar-orbiting Aqua-MODIS and ground-based weather radar. The expected outcomes are improvements in satellite volcanic ash cloud retrieval (altitude, mass, aerosol optical depth and effective radius), the generation of new satellite products (ash concentration and particle number density in the thermal infrared) and better characterization of volcanic eruptions (plume altitude, total ash mass erupted and particle number density from thermal infrared to microwave). This approach is the core of the multi-platform volcanic ash cloud estimation procedure being developed within the European FP7-APhoRISM project. The Mt. Etna (Sicily, Italy) volcano lava fountaining event of 23 November 2013 was considered as a test case. The results of the integration show the presence of two volcanic cloud layers at different altitudes. The improvement of the volcanic ash cloud altitude leads to a mean difference between the SEVIRI ash mass estimations, before and after the integration, of about the 30%. Moreover, the percentage of the airborne “fine” ash retrieved from the satellite is estimated to be about 1%–2% of the total ash emitted during the eruption. Finally, all of the estimated parameters (volcanic ash cloud altitude, thickness and total mass) were also validated with ground-based visible camera measurements, HYSPLIT forward trajectories, Infrared Atmospheric Sounding Interferometer (IASI) satellite data and tephra deposits.
      376  8
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ground-Based Measurements of the 2014–2015 Holuhraun Volcanic Cloud (Iceland)

    The 2014–2015 Bárðarbunga fissure eruption at Holuhraun in central Iceland was distinguished by the high emission of gases, in total 9.6 Mt SO2, with almost no tephra. This work collates all ground-based measurements of this extraordinary eruption cloud made under particularly challenging conditions: remote location, optically dense cloud with high SO2 column amounts, low UV intensity, frequent clouds and precipitation, an extensive and hot lava field, developing ramparts, and high-latitude winter conditions. Semi-continuous measurements of SO2 flux with three scanning DOAS instruments were augmented by car traverses along the ring-road and along the lava. The ratios of other gases/SO2 were measured by OP-FTIR, MultiGAS, and filter packs. Ratios of SO2/HCl = 30–110 and SO2/HF = 30–130 show a halogen-poor eruption cloud. Scientists on-site reported extremely minor tephra production during the eruption. OPC and filter packs showed low particle concentrations similar to non-eruption cloud conditions. Three weather radars detected a droplet-rich eruption cloud. Top of eruption cloud heights of 0.3–5.5 km agl were measured with ground- and aircraft-based visual observations, web camera and NicAIR II infrared images, triangulation of scanning DOAS instruments, and the location of SO2 peaks measured by DOAS traverses. Cloud height and emission rate measurements were critical for initializing gas dispersal simulations for hazard forecasting
      434  179
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A New Radar‐Based Statistical Model to Quantify Mass Eruption Rate of Volcanic Plumes

    Accurate forecasting of volcanic particle (tephra) dispersal and fallout requires a reliable estimation of key Eruption Source Parameters (ESPs) such as the Mass Eruption Rate (Q M). QM is usually estimated from the Top Plume Height (HTP) using empirical and analytical models. For the first time, we combine estimates of HTP and QM derived from the same sensor (radar) with mean wind velocity values (vW) for lava-fountain fed tephra plumes associated with 32 paroxysms of Mt. Etna (Italy) to develop a new statistical model based on a Markov Chain Monte Carlo approach for model parameter estimation. This model is especially designed for application to radar data to quickly infer QM from observed HTP and vW, and estimate the associated uncertainty. It can be easily applied and adjusted to data retrieved by radars worldwide, improving our capacity to quickly estimate QM and related uncertainties required for the tephra dispersal hazard.
      191  51
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Multisensor Characterization of the Incandescent Jet Region of Lava Fountain-Fed Tephra Plumes

    Explosive basaltic eruptions eject a great amount of pyroclastic material into the atmosphere, forming columns rising to several kilometers above the eruptive vent and causing significant disruption to both proximal and distal communities. Here, we analyze data, collected by an X-band polarimetric weather radar and an L-band Doppler fixed-pointing radar, as well as by a thermal infrared (TIR) camera, in relation to lava fountain-fed tephra plumes at the Etna volcano in Italy. We clearly identify a jet, mainly composed of lapilli and bombs mixed with hot gas in the first portion of these volcanic plumes and here called the incandescent jet region (IJR). At Etna and due to the TIR camera configuration, the IJR typically corresponds to the region that saturates thermal images. We find that the IJR is correlated to a unique signature in polarimetric radar data as it represents a zone with a relatively high reflectivity and a low copolar correlation coe cient. Analyzing five recent Etna eruptions occurring in 2013 and 2015, we propose a jet region radar retrieval algorithm (JR3A), based on a decision-tree combining polarimetric X-band observables with L-band radar constraints, aiming at the IJR height detection during the explosive eruptions. The height of the IJR does not exactly correspond to the height of the lava fountain due to a di erent altitude, potentially reached by lapilli and blocks detected by the X-band weather radar. Nonetheless, it can be used as a proxy of the lava fountain height in order to obtain a first approximation of the exit velocity of the mixture and, therefore, of the mass eruption rate. The comparisons between the JR3A estimates of IJR heights with the corresponding values recovered from TIR imagery, show a fairly good agreement with di erences of less than 20% in clear air conditions, whereas the di erence between JR3A estimates of IJR height values and those derived from L-band radar data only are greater than 40%. The advantage of using an X-band polarimetric weather radar in an early warning system is that it provides information in all weather conditions. As a matter of fact, we show that JR3A retrievals can also be obtained in cloudy conditions when the TIR camera data cannot be processed.
      271  121
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Examples of Multi-Sensor Determination of Eruptive Source Parameters of Explosive Events at Mount Etna

    Multi-sensor strategies are key to the real-time determination of eruptive source parameters (ESPs) of explosive eruptions necessary to forecast accurately both tephra dispersal and deposition. To explore the capacity of these strategies in various eruptive conditions, we analyze data acquired by two Doppler radars, ground- and satellite-based infrared sensors, one infrasound array, visible video-monitoring cameras as well as data from tephra-fallout deposits associated with a weak and a strong paroxysmal event at Mount Etna (Italy). We find that the different sensors provide complementary observations that should be critically analyzed and combined to provide comprehensive estimates of ESPs. First, all measurements of plume height agree during the strong paroxysmal activity considered, whereas some discrepancies are found for the weak paroxysm due to rapid plume and cloud dilution. Second, the event duration, key to convert the total erupted mass (TEM) in the mass eruption rate (MER) and vice versa, varies depending on the sensor used, providing information on different phases of the paroxysm (i.e., unsteady lava fountaining, lava fountain-fed tephra plume, waning phase associated with plume and cloud expansion in the atmosphere). As a result, TEM and MER derived from different sensors also correspond to the different phases of the paroxysms. Finally, satellite retrievals for grain-size can be combined with radar data to provide a first approximation of total grain-size distribution (TGSD) in near real-time. Such a TGSD shows a promising agreement with the TGSD derived from the combination of satellite data and whole deposit grain-size distribution (WDGSD).
      291  187
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Multisatellite Multisensor Observations of a Sub-Plinian Volcanic Eruption: The 2015 Calbuco Explosive Event in Chile

    A-train satellite data, acquired during the Calbuco volcano (Chile) sub-Plinian eruption in April 2015, are discussed to explore the complementarity of spaceborne observations in the microwave (MW), thermal infrared (TIR), and visible wavelengths for both near-source plume and distal ash clouds. The analysis shows that TIR-based detection techniques are not suitable near the volcanic vent where rising convective columns are associated with large optical depths. Detection and parametric estimates of near-source tephra mass loading and plume height from MW radiometric data, available 69 min after the eruption onset, are proposed. Results indicate a maximum plume altitude of about 21 km above the sea level and an ash mass of 3.65 × 10^10 kg, in agreement with mass values obtained from empirical formulas, but less than proximal– distal mass deposit of 1.86 × 10^11 kg. This discrepancy may be explained by extrapolating Advanced Technology Microwave Sounder-based estimates to 6 h, thus obtaining a total mass of about 1.90×10^11 kg. Distal volcanic cloud retrievals are derived from TIR imagery and results show a good agreement between Moderate-Resolution Imaging Spectroradiometer (MODIS) and Visible Infrared Imaging Radiometer Suite (VIIRS) retrievals of total mass taking into account the overpass time shift. If only the overlapping pixels between MODIS and VIIRS are considered, the respective estimates are 1.90 × 10^9 kg and 1.80 × 10^9 kg. TIR radiometric estimates of distal ash cloud height and mass loadings are also compared with Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations lidar retrievals. For low-to-medium optically thick ash cloud, average Cloud-Aerosol Lidar with Orthogonal Polarization-derived mass loading is about 0.8 g/m2 against 0.4 g/m2 from VIIRS and 1.4 g/m2 from MODIS.
      276  6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Maximum-Likelihood Retrieval of Volcanic Ash Concentration and Particle Size From Ground-Based Scanning Lidar

    An inversion methodology, named maximum likelihood (ML) volcanic ash light detection and ranging (Lidar) retrieval (VALR-ML), has been developed and applied to estimate volcanic ash particle size and ash mass concentration within volcanic plumes. Both estimations are based on the ML approach, trained by a polarimetric backscattering forward model coupled with a Monte Carlo ash microphysical model. The VALR-ML approach is applied to Lidar backscattering and depolarization profiles, measured at visible wavelength during two eruptions of Mt. Etna, Catania, Italy, in 2010 and 2011. The results are compared with those of ash products derived from other parametric retrieval algorithms. A detailed comparison among these different retrieval techniques highlights the potential of VALR-ML to determine, on the basis of a physically consistent approach, the ash cloud area that must be interdicted to flight operations. Moreover, the results confirm the usefulness of operating scanning Lidars near active volcanic vents.
      228  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Potential of High-resolution Detection and Retrieval of Precipitation Fields from X-band Spaceborne Synthetic Aperture Radar over land

    X-band Synthetic Aperture Radars (X-SARs), able to image the Earth’s surface at metric resolution, may provide a unique opportunity to measure rainfall over land with spatial resolution of about few hundred meters, due to the atmospheric moving-target degradation effects. This capability has become very appealing due to the recent launch of several X-SAR satellites, even though several remote sensing issues are still open. This work is devoted to: (i) explore the potential of X-band high-resolution detection and retrieval of rainfall fields from space using X-SAR signal backscattering amplitude and interferometric phase; (ii) evaluate the effects of spatial resolution degradation by precipitation and inhomogeneous beam filling when comparing to other satellite-based sensors. Our X-SAR analysis of precipitation effects has been carried out using both a TerraSAR-X (TSX) case study of Hurricane “Gustav” in 2008 over Mississippi (USA) and a COSMO-SkyMed (CSK) X-SAR case study of orographic rainfall over Central Italy in 2009. For the TSX case study the near-surface rain rate has been retrieved from the normalized radar cross section by means of a modified regression empirical algorithm (MREA). A relatively simple method to account for the geometric effect of X-SAR observation on estimated rainfall rate and firstorder volumetric effects has been developed and applied. The TSX-retrieved rain fields have been compared to those estimated from the Next Generation Weather Radar (NEXRAD) in Mobile (AL, USA). The rainfall detection capability of X-SAR has been tested on the CSK case study using the Correspondence to: F. S. Marzano (marzano@die.uniroma1.it) repeat-pass coherence response and qualitatively comparing its signature with ground-based Mt. Midia C-band radar in central Italy. A numerical simulator to represent the effect of the spatial resolution and the antenna pattern of TRMMsatellite Precipitation Radar (PR) and Microwave Imager (TMI), using high-resolution TSX-retrieved rain images, has been also set up in order to evaluate the rainfall beam filling phenomenon. As expected, the spatial average can modify the statistics of the high-resolution precipitation fields, strongly reducing its dynamics in a way non-linearly dependent on the rain rate local average value.
      211  335