Zago, Vito
Preferred name
Zago, Vito
Email
vito.zago@ingv.it
ORCID
Scopus Author ID
57200039789
The search returned 13 results
Now showing 1 - 10 of 13
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The Role of Multi-Sensor Satellite Remote Sensing in Characterizing Volcanic Plumes Relevant to Climate Forcing
(Basel : Molecular Diversity Preservation International, 2026-09-28); ; ; ; Volcanic eruptions represent a significant natural forcing mechanism within the Earth’s climate system, capable of inducing profound atmospheric perturbations. Major explosive events inject vast quantities of volcanic ash and trace gases into the atmosphere, among which sulfur dioxide (SO2) has the biggest influence on climate variability. Once injected into the atmosphere, the SO2 oxidizes to form sulphate aerosols which can produce negative radiative forcing and cool the Earth’s surface. At the same time, fine ash particles block sunlight and create a “dust veil” that further changes atmospheric temperatures. These complex cooling and warming effects highlight the need for accurate characterization of volcanic emissions. In this context, satellite remote sensing provides continuous global observations, making it an essential tool for monitoring volcanic emissions and assessing their long-term climatic impacts. This review provides a comprehensive synthesis of multi-sensor satellite observations to trace emissions from major volcanic eruptions. To highlight the potential of modern satellite observations to characterize volcanic emissions, we exploit data spanning the entire electromagnetic spectrum, from the ultraviolet (UV) to thermal infrared (TIR). We examine three key eruptions from the past decade representing this new era of spaceborne monitoring: Raikoke (Russia, 2019), Kīlauea (USA, 2025), and Hayli Gubbi (Ethiopia, 2025). These case studies demonstrate how contemporary satellite instruments deliver reliable data worldwide, which is crucial for both the scientific community and society in assessing the climatic impacts of volcanism.2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A physically consistent AI-based SPH emulator for computational fluid dynamics
The integration of artificial intelligence (AI) into computational fluid dynamics (CFD) has significantly expanded the scope of fluid modeling, allowing enhanced analysis capabilities and improved simulation performance. While Eulerian methods already benefit extensively from AI, notably in reliable weather prediction, the application of AI to Lagrangian methods remains less consolidated. Smoothed particle hydrodynamics (SPH) is a Lagrangian mesh-less numerical method for CFD with well-established advantages for the simulation of highly dynamic free-surface flows. Here, we explore an application of AI to SPH simulations, utilizing an artificial neural network (ANN) to estimate hydrodynamic forces between particle pairs, learning from SPH-simulated results. A model of this nature, which emulates the mathematical representation of physics, is termed an emulator. We examine the physical significance of the emulator, presenting its applications in benchmark tests, assessing its faithfulness to traditional SPH simulations, and highlighting its ability to generalize and simulate test cases with varying levels of complexity beyond its training data.22 78 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A numerically robust, parallel-friendly variant of BiCGSTAB for the semi-implicit integration of the viscous term in Smoothed Particle Hydrodynamics
(2022-06-29); ; ; ; Implicit integration of the viscous term can significantly improve performance in computational fluid dynamics for highly viscous fluids such as lava. We show improvements over our previous proposal for semi-implicit viscous integration in Smoothed Particle Hydrodynamics, extending it to support a wider range of boundary models. Due to the resulting loss of matrix symmetry, a key advancement is a more robust version of the biconjugate gradient stabilized method to solve the linear systems, that is also better suited for parallelization in both shared-memory and distributed-memory systems. The advantages of the new solver are demostrated in applications with both Newtonian and non-Newtonian fluids, covering both the numerical aspect (improved convergence thanks to the possibility to use more accurate boundary model) and the computing aspect (with excellent strong scaling and satisfactory weak scaling).270 295 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Overcoming excessive numerical dissipation in SPH modeling of water waves
Excessive nonphysical energy dissipation is a problem in Smoothed Particle Hydrodynamics (SPH) when modeling free surface waves, resulting in a significant decrease in wave amplitude within a few wavelengths for progressive waves. This dissipation poses a limitation to the physical scale of SPH applications involving water wave propagation. Some prior solutions to this wave decay problem rely on elaborate schemes, which require a complex, or non-straightforward, implementation. Other approaches demand large smoothing lengths that lead to longer simulation times and potential degradation of the results. In this work we present an approach based on a kernel gradient correction. Our scheme is fully 3D and solves the main known drawbacks of kernel gradient corrections, such as instabilities and lack of momentum conservation. The latter is ensured by adopting an averaged correction matrix, so as to conserve reciprocity during particle interactions. We test our model with a standing wave in a basin and a progressive wave train in a wave tank, and in both cases no nonphysical decay occurs. A comparison to an approach based on large smoothing factors shows advantages both in quality of the results and simulation time.234 155 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Accuracy Improvements for Single Precision Implementations of the SPH Method
One of the main issues with naive Smoothed Particle Hydrodynamics (SPH) implementations is the lack of uniform accuracy in the computational domain. If not mastered correctly, this leads to non-physical predictions when dealing with large-domain hydraulic problems or with very fine resolutions. The present article addresses two recommended methodologies to achieve the best numerical accuracy with single-precision SPH implementations, using the GPUSPH engine as reference. A still water test case is examined using different approaches. Instead of operating with the physical particle positions, the use of positions relative to the neighbour-search grid leads to a homogeneous accuracy distribution throughout the domain, with a consequent improvement in energy conservation. Further improvements are attained by evolving the relative density variation in the fluid equations, instead of the physical density. This helps in bounding the numerical errors within the machine epsilon and prevents any spurious behaviour due to error accumulation.302 2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Living at the edge of an active volcano: Risk from lava flows on Mt. Etna
Lava flows represent the greatest threat by far to exposed population and infrastructure on Mt. Etna, Italy. The increasing exposure of a larger population, which has almost tripled in the area around Mt. Etna during the past 150 years, has resulted from poor assessment of the volcanic hazard and inappropriate land use in vulnerable areas. Here we quantify the lava flow risk on the flanks of Mt. Etna volcano using a Geographic Information System (GIS)-based approach that integrates the hazard with the exposure of elements at stake. The hazard, which shows the long-term probability related to lava flow inundation, is obtained by combining three different kinds of information: the spatiotemporal probability of new flank eruptive vents opening in the future, the event probability associated with classes of expected eruptions, and the overlapping of lava flow paths simulated by the MAGFLOW model. Data including all exposed elements were gathered from institutional web portals and high-resolution satellite imagery and organized in four thematic layers: population, buildings, service networks, and land use. The total exposure is given by a weighted linear combination of the four thematic layers, where weights are calculated using the Analytic Hierarchy Process (AHP). The resulting risk map shows the likely damage caused by a lava flow eruption and allows rapid visualization of the areas subject to the greatest losses if a flank eruption were to occur on Mt. Etna. The highest risk is found in the southeastern flank due to the combination of high hazard and population density.1062 8 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 3D Lava flow mapping of the 17-25 May 2016 Etna eruption using tri-stereo optical satellite data
During basaltic eruptions, the average rate at which lava is erupted (effusion rate) is one of the most important factors controlling the evolution, growth and extent of the flow field. This has implications both for forecasting purposes, highlighting the importance of the effusion rate as input parameter of physics-based numerical models, and to advance knowledge on the shallow feeder system by constraining the supplied mass. Satellite remote sensing provides a mean to estimate the average effusion rate by applying a direct conversion from the measured radiant heat loss by an active lava flow. This conversion relies on a set of parameters of lava (e.g. rock density, heat capacity, vesicularity, emissivity, etc.) and suffers of multiple sources of uncertainties and measurements errors, whose quantification is still an open problem. Here we constrain the volume of lava emitted at Mt Etna on 17-25 May 2016 and emplaced out of the summit craters, by using preeruptive and post eruptive digital elevation models (DEMs) obtained processing satellite images acquired by the Pléiades constellation, which provides images at 50 cm resolution in stereo and tristereo mode. The 3D processing of the tri-stereo Pléiades imagery (acquired on 24 December 2015 and 18 July 2016), performed using the free and open source MicMac photogrammetric library, provides estimations of the distribution of thickness and the bulk volume emitted. The integration of multi-platform remote sensing products represents a new potential of merging capabilities to enable a more comprehensive response to effusive crises.770 161 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Preliminary validation of lava benchmark tests on the GPUSPH particle engine
Lava flow modeling is important in many practical applications, such as the simulation of potential hazard scenarios and the planning of risk mitigation measures, as well as in scientific research to improve our understanding of the physical processes governing the dynamics of lava flow emplacement. Existing predictive models of lava flow behavior include various methods and solvers, each with its advantages and disadvantages. Codes differ in their physical implementations, numerical accuracy, and computational efficiency. In order to validate their efficiency and accuracy, several benchmark test cases for computational lava flow modeling have been established. Despite the popularity gained by the Smoothed Particle Hydrodynamics (SPH) method in Computational Fluid Dynamics (CFD), very few validations against lava flows have been successfully conducted. At the Tecnolab of INGVCatania we designed GPUSPH, an implementation of the weakly-compressible SPH method running fully on Graphics Processing Units (GPUs). GPUSPH is a particle engine capable of modeling both Newtonian and non-Newtonian fluids, solving the three-dimensional Navier– Stokes equations, using either a fully explicit integration scheme, or a semi-implicit scheme in the case of highly viscous fluids. Thanks to the full coupling with the thermal equation, and its support for radiation, convection and phase transition, GPUSPH can be used to faithfully simulate lava flows. Here we present the preliminary results obtained with GPUSPH for a benchmark series for computational lava-flow modeling, including analytical, semi-analytical and experimental problems. The results are reported in terms of correctness and performance, highlighting the benefits and the drawbacks deriving from the use of SPH to simulate lava flows.927 244 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Satellite-driven modeling approach for monitoring lava flow hazards during the 2017 Etna eruption
The integration of satellite data and numerical modeling represents an efficient strategy to find immediate answers to the main issues raised at the onset of a new effusive eruption. Satellite thermal remote sensing can provide a variety of products suited to timing, locating, and tracking the radiant character of lava flows, including the opening times of eruptive vents. The time-series analysis of thermal satellite data can also provide estimates of the time-averaged discharge rate and volume. High-spatial resolution multispectral satellite data complement field observations for monitoring the lava emplacement in terms of flow length and area. All these satellite-derived parameters can be passed as input to physics-based numerical models in order to produce more accurate and reliable forecasts of effusive scenarios during ongoing eruptions. Here, we demonstrate the potential of the integrated application of satellite remote sensing techniques and lava flow models during the 2017 eruptive activity of Mt Etna. Remote sensing data from SEVIRI are analyzed by the HOTSAT system to output hotspot location, lava thermal flux, and effusion rate estimation. This output is used to drive, as well as to continuously update, lava flow simulations performed by the physics-based MAGFLOW model. We also show how Landsat-8 and Sentinel-2 satellite data complement the field observations to track the flow front position in time and add valuable data on lava flow advancement with which to iteratively validate the numerical simulations.1076 274 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Semi-implicit 3D SPH on GPU for lava flows
(2018-12-15); ; ; ; GPUSPH is an implementation of Weakly-Compressible Smoothed Particle Hydrodynamics with an explicit predictor–corrector integration scheme, that takes advantage of the parallel nature of the method to run on Graphic Processing Units (GPUs). Despite the massive speed-up granted by the use of GPUs, the application of GPUSPH to the simulation of highly viscous fluids is still problematic, due to the severe time-stepping restrictions imposed by the explicit integration scheme when the viscous term becomes dominant. This is an issue in the simulation of lava flows, where the thermal-dependent rheology can lead to kinematic viscosities in the order of 104m2s−1 or more at low temperatures. To overcome this limitation, we introduce a semi-implicit integration scheme, where only the viscous part of the momentum equation is solved implicitly. Here we show the significant advantages of our approach in terms of simulation run times as well as better quality of the results over the fully explicit scheme.675 2
