Skip to main content
The search returned 8 results
Now showing 1 - 8 of 8
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The impact of structural complexity, fault segmentation, and reactivation on seismotectonics: Constraints from the upper crust of the 2016–2017 Central Italy seismic sequence area

    Young and tectonically active chains like the Central Apennines (Italy) are featured by high structural complexity as a result of the overprint of subsequent deformational stages, making interpretation of seismotectonics challenging. The Central Apennines are characterized by the stacking of tectono-sedimentary units organized in thrust sheets. However, extensional tectonics is currently affecting the axial sector of the thrust belt, mostly expressing in extensional earthquakes. Using a large subsurface dataset acquired for hydrocarbon exploration in the region struck by the 2016–2017 Central Italy seismic sequence, we built a comprehensive 3D geological model and compared it with the seismicity. The model primarily shows a series of thrusts developed during the Miocene-Pliocene Apennines orogenesis and inherited normal faults developed during the Mesozoic extensional phase and the Miocene foreland flexural process. These normal faults were segmented and transported within the thrust sheets, and sometimes they still show a clear surface expression. The succession of tectonic stages resulted in a widespread reactivation of inherited structures, sometimes inverting their kinematics with different styles and rates, and disarticulating pre-existing configurations. Such evolution has a strong impact on the seismicity observed in the area, as demonstrated by some examples that show how the seismicity is aligned on segments of inherited faults, both compressional and extensional. Their reactivation can be explained by their favorable orientation within the current extensional stress field. Results feed the debate about the seismogenic potential of faults identified both at depth and surface, which can impact the seismic hazard of the Apennines.
      385  356
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Progetto RETRACE-3D - centRal italy EarThquakes integRAted Crustal modEl - Modello Geologico

    (2021-03-29)
    RETRACE-3D, Working Group
    ;
    ; ; ;
    Three-dimensional geological model of the area of the central Apennines affected by the 2016-2018 seismic sequence. The model consists of stratigraphic surfaces (top or basal unconformity of units, or sequences of units, with homogeneous behavior) and main faults of the area. The stratigraphic surfaces are, from the oldest to the most recent: the top of pre-Upper Triassic units, the top of the intra-Triassic units, the top of Calcare Massiccio, the top of the Marne
      157  97
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Progetto RETRACE-3D - centRal italy EarThquakes integRAted Crustal modEl - Rapporto Finale

    (2021-03-29)
    RETRACE-3D, Working Group
    ;
    ; ; ;
    Il progetto RETRACE-3D (centRal italy EarThquakes integRAted Crustal modEl) è volto alla caratterizzazione tridimensionale, geologica e sismotettonica, del volume di crosta terrestre che a partire dal 24 agosto 2016 è stato interessato dai terremoti di Amatrice, Visso e Norcia, e dalla relativa sequenza sismica. Il progetto è il risultato di una collaborazione tra il Dipartimento della Protezione Civile, l’Istituto Nazionale di Geofisica e Vulcanologia (INGV), il Consiglio Nazionale delle Ricerche che partecipa con l’Istituto di Geologia Ambientale e Geoingegneria (CNR-IGAG) e l’Istituto per il Rilevamento Elettromagnetico dell’Ambiente (CNR-IREA) e l’Istituto Superiore per la Protezione e la Ricerca Ambientale (ISPRA), con la collaborazione di Eni e Total, realtà private ma anch’esse parte del Servizio nazionale della Protezione Civile, che hanno messo a disposizione i propri dati di sottosuolo.
      171  128
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    RETRACE-3D project: a multidisciplinary collaboration to build a crustal model for the 2016-2018 central Italy seismic sequence

    The RETRACE-3D project (centRal italy EarThquakes integRAted Crustal model) focused on the revision of all the available geological and geophysical data in the area interested by the 2016-2018 seismic sequence of central Italy, with the final aim to reconstruct a reliable and consistent 3D geological model of that area. It is based on a collaboration, which was framed into a formal agreement, between Dipartimento della Protezione Civile (the Italian Civil Protection Department), Istituto di Geologia Ambientale e Geoingegneria, and Istituto per il Rilevamento Elettromagnetico of the Consiglio Nazionale delle Ricerche, Istituto Nazionale di Geofisica e Vulcanologia, and Istituto Superiore per la Protezione e la Ricerca Ambientale. The agreement purpose was to develop a project aimed at the geological and seismotectonic characterisation of the crustal volume hosting that seismic sequence. We present and discuss the approach, methodology and results of the project. The 3D geological model of the study area is developed in detail down to a depth of about 12 km, and extended to the Moho based on available regional-scale information. The model is available on the RETRACE-3D project website (www.retrace3d.it).
      3102  360
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    From mapped faults to fault-length earthquake magnitude (FLEM): a test on Italy with methodological implications

    Empirical scaling relationships between fault or slip dimensions and earthquake magnitudes are often used to assess the maximum possible earthquake magnitude of a territory. Upon the assumption of the reactivability of any fault, the earthquake magnitudes derived from the surface fault length (FLEM) are compared at the national scale in Italy against catalogued magnitudes. FLEMs are obtained by considering a comprehensive fault dataset regardless of fault age, stress field orientation, strain rate, etc. In particular, (1) a comprehensive catalogue of all known faults is compiled by merging the most complete databases available; (2) FLEM is then derived from fault length; and (3) the resulting FLEMs are compared (i.e. the mathematical difference) with catalogued earthquake magnitudes. Results show that the largest FLEMs as well as the largest differences between FLEMs and catalogued magnitudes are observed for poorly constrained faults, mainly inferred from subsurface data. It is suggested that these areas have to be further characterized to better estimate fault dimension and segmentation and hence properly assess the FLEM. Where, in contrast, the knowledge of faults is geologically well constrained, the calculated FLEM is often consistent with the catalogued seismicity, with the 2 value of the distribution of differences being 1.47 and reducing to 0.53 when considering only the Mw 6:5 earthquakes. Our work highlights areas, in Italy, where further detailed studies on faults are required.
      211  98
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    RETRACE-3D PROJECT, a multidisciplinary approach for the construction of a 3D crustal model: first results and seismotectonic implications

    The RETRACE-3D (centRal italy EarThquakes integRAted Crustal modEl) Project has been launched with the ambitious goal to build, as first result, a new, robust, 3D geological model of broad consensus of the area struck by the 2016-2018 Central Italy seismic sequence
      170  106
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Structural and Stratigraphic Control on Salient and Recess Development Along a Thrust Belt Front: The Northern Apennines (Po Plain, Italy)

    The external part of the Northern Apennines accretionary wedge in northern Italy is buried beneath its fast subsiding and asymmetric foreland basin in the Po Plain. It is characterized by a diffused noncylindrical geometry resulting in salients and recesses in the study area, namely, the Cremona salient, the Parma recess, and the Ferrara salient. The interpretation of borehole and seismic reflection data suggests that the thrust belt is characterized by thin-skinned tectonic style. Two main décollement levels have been identified: a basal décollement located in the Upper Carnian units (San Giovanni Bianco Clay and Raibl Group) and a shallow décollement located in the late Eocene-Oligocene formations (Gallare Marls). The décollement surfaces dip SSW toward the hinterland of the accretionary prism, parallel to the steep (>10°) regional monocline. The geometry of the seismically active Northern Apennines system of salients and recesses is essentially controlled by the interplay of two factors: (i) the lateral facies variations of the stratigraphic units hosting and controlling the location and depth of the décollement levels and (ii) the slope of the basal décollement. Salients occur where, due to the inherited variable stratigraphy of the Mesozoic-Cenozoic Tethyan passive margin, the shaly formations hosting the two décollements are well developed allowing larger forward propagation of the thrust wedge. Recesses are instead associated to erosional-nondepositional areas. Moreover, salients are more pronounced where the flexural behavior of the Adriatic subducting slab has generated a steeper geometry of the foreland monocline and consequently of the basal décollement.
      62  663
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Ventotene Volcanic Ridge: a newly explored complex in the central Tyrrhenian Sea (Italy)

    New high-resolution geophysical data collected along the eastern margin of the Tyrrhenian back-arc basin, in the Pontine Islands area, reveal a ∼NW-SE elongated morphological high, the Ventotene Volcanic Ridge (VR), located on the northern edge of the Ventotene Basin. High-resolution multibeam bathymetry, combined with magnetic data, multi- and single-channel seismic profiles, and ROV dives, suggest that VR results from aggregation of a series of volcanic edifices. The summit of these volcanoes is flat and occurs at about 170 m water depth. Given their depths, we propose that flat morphologies were probably caused by surf erosion during Quaternary glacial sea level lowstands. Seismic stratigraphy together with magnetic data suggest that the volcanic activity in this area is older than 190–130 ka age and may be coeval with that of Ventotene Island (Middle Pleistocene). The submarine volcanoes, located 25 km north of Ventotene, are part of a ∼E-W regional volcanic alignment and extend the Pontine volcanism landward toward the Gaeta bay. Integration of structural data from multichannel seismic profiles in this sector of the eastern Tyrrhenian margin indicates that several normal and/or transtensional faults, striking WNW-ESE, NNW-SSE, and NE-SW, offset the basement and form alternating structural highs and depressions filled by thick, mostly undeformed, sedimentary units. Arc-related magmatism is widespread in the study area, where the VR is placed at the hangingwall of the west-directed Apennines subduction zone, which is undergoing tensional and transtensional tectonics. Bathymetric and topographic evidence shows that VR lies in between a major NE-SW trending escarpment east of Ponza and a NE-SW trending graben southwest of the Roccamonfina volcano, a NE-SW transfer zone that accommodate the extension along this segmented portion of the margin. This suggests that the interaction between NE-SW and NW-SE trending fault systems acts as a structural control on location of eruptive centers, given that main volcanic edifices develop along the NW-SE direction, compatible with the extensional setting of the Tyrrhenian basin.
      357  191