Scaillet, Bruno
Preferred name
Scaillet, Bruno
Main Affiliation
12 results
The search returned 12 results
Now showing 1 - 10 of 12
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Experimental and thermodynamic constraints on mineral equilibrium inpantelleritic magmas
(2020-09-21); ; ; ; Crystallization experiments on two pantellerites from Pantelleria, Italy, provide new evidence for the relationships between mineral phases in pantelleritic rocks aswell as the influence of temperature and redox conditions on mineral assemblages. Experiments were performed at 1 kbar with temperature ranging between 750–900°C, and fluid saturation conditionswith XH2O (=H2O/H2O+CO2) between 0 and 1. Redox conditionswere fixed at, or slightly below, the FMQbuffer. Results showthat at temperature of 900 °C pantelleriticmagmas arewell above the liquidus regardless their water content; we also observed a decrease in liquidus temperature (800°C) with increasingly reducing conditions. Mineral assemblages of the natural rocks have been successfully reproduced, particularly the relationship between fayalite and aenigmatite, which appear to be strongly controlled by melt peralkalinity, temperature and redox conditions. This is the first time that fayalitic olivine have been synthetized in experimental studies on pantellerites, which was found to be stable only for temperatures ≥750°C while amphibole can be stable at temperatures as high as 800°C at high fF2. Experimental results have been compared with the composition of mineral phases as well as with the results obtained from mineral equilibrium, geothermometry, and oxygen barometry studies on pantelleritic lava and tuffs from Pantelleria (Italy), Eburru (Kenya) and Menengai (Kenya). Petrological characteristics appear similar at different locations worldwide, with typical assemblages of anorthoclase and sodian clinopyroxene with variable fayalite, aenigmatite, Fe-Ti oxides and amphibole.75 132 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Crystallization Kinetics of Alkali Feldspar in Peralkaline Rhyolitic Melts: Implications for Pantelleria Volcano
Peralkaline rhyolites, associated with extensional tectonic settings, are medium to low viscosity magmas that often produce eruptive styles ranging from effusive to highly explosive eruptions. The role of pre-eruptive conditions and crystallization kinetics in influencing the eruptive style of peralkaline rhyolitic magmas has been investigated and debated considering equilibrium conditions. However, experimental constraints on the effect of disequilibrium in crystallization in such magmas are currently lacking in the literature. Therefore, we performed isobaric cooling experiments to investigate alkali feldspar crystallization kinetics in peralkaline rhyolitic melts. Experiments were performed under water-saturated, water-undersaturated, and anhydrous conditions between 25 and 100 MPa, at 670–790◦C and with experimental durations ranging from 0.5 to 420 h. Here we present the first data on crystallization kinetics of alkali feldspar, which is the main crystal phase in peralkaline rhyolitic melts, in order to improve our understanding of the evolutionary timescales of these melts and their ability to shift between effusive and explosive activity. Our experimental results indicate that the alkali feldspar nucleation delay can range from hours to several days as a function of undercooling and H2O content in the melt. Thus, a peralkaline rhyolitic magma can be stored at the pre-eruptive conditions for days without important variations of its crystal fraction. This suggests that crystallization may not necessarily play the main role in triggering fragmentation during explosive eruptions of peralkaline rhyolitic magmas.133 80 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Mantle plumes are oxidised
From oxic atmosphere to metallic core, the Earth’s components are broadly stratified with respect to oxygen fugacity. A simple picture of reducing oxygen fugacity with depth may be disrupted by the accumulation of oxidised crustal material in the deep lower mantle, entrained there as a result of subduction. While hotspot volcanoes are fed by regions of the mantle likely to have incorporated such recycled material, the oxygen fugacity of erupted hotspot basalts had long been considered comparable to or slightly more oxidised than that of mid-ocean ridge basalt (MORB) and more reduced than subduction zone basalts. Here we report measurements of the redox state of glassy crystal-hosted melt inclusions from tephra and quenched lava samples from the Canary and Cape Verde Islands, that we can independently show were entrapped prior to extensive sulphurdegassing. We find high ferric iron to total iron ratios (Fe3+/ Fe) of up to 0.27–0.30, indicating that mantle plume primary melts are significantly more oxidised than those associated with mid-ocean ridges and even subduction zone. These results, together with previous investigations from the Erebus, Hawaiian and Icelandic hotspots, confirm that mantle upwelling provides a return flow from the deep Earth for components of oxidised subducted lithosphere and suggest that highly oxidised material accumulates or is generated in the lower mantle. The oxidation state of the Earth’s interior must therefore be highly heterogeneous and potentially locally inversely stratified.80 2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Phase Equilibria of Pantelleria Trachytes (Italy): Constraints on Pre-eruptive Conditions and on the Metaluminous to Peralkaline Transition in Silicic Magmas
(2018-04-20); ; ; ; The relationships between trachytes and peralkaline rhyolites (i.e. pantellerites and comendites), which occur in many continental rift systems, oceanic islands and continental intraplate settings, is unclear. To fill this gap, we have performed phase equilibrium experiments on two representative metaluminous trachytes from Pantelleria to determine both their pre-eruptive equilibration conditions (pressure, temperature, H2O content and redox state) and liquid lines of descent. Experiments were performed in the temperature range 750–950 C, pressure 0 5–1 5 kbar and fluid saturation conditions with XH2O [¼H2O/(H2OþCO2)] ranging between zero and unity. Redox conditions were fixed below the nickel–nickel oxide buffer (NNO). The results show that at 950 C and melt water contents (H2Omelt) close to saturation, trachytes are at liquidus conditions at all pressures. Clinopyroxene is the liquidus phase, being followed by iron-rich olivine and alkali feldspar. Comparison of experimental and natural phases (abundances and compositions) yields the following pre-eruptive conditions: P¼160 5 kbar, T¼925625 C, H2Omelt¼261wt %, and fO2 between NNO– 0 5 and NNO– 2. A decrease in temperature from 950 C to 750 C, as well as of H2Omelt, promotes a massive crystallization of alkali feldspar to over 80 wt %. Iron-bearing minerals show gradual iron enrichment when T and fO2 decrease, trending towards the compositions of the phenocrysts of natural pantellerites. Despite the metaluminous character of the bulk-rock compositions, residual glasses obtained after 80 wt % crystallization evolve toward comenditic compositions, owing to profuse alkali feldspar crystallization, which decreases the Al2O3 of the melt, leading to a consequent increase in the peralkalinity index [PI¼molar (Na2OþK2O)/Al2O3]. This is the first experimental demonstration that peralkaline felsic derivatives can be produced by low-pressure fractional crystallization of metaluminous mafic magmas. Our results show that the pantelleritic magmas of basalt–trachyte–rhyolite igneous suites require at least 95 wt % of parental basalt crystallization, consistent with trace element evidence. Redox conditions, through their effect on Fe–Ti oxide stabilities, control the final iron content of the evolving melt.91 4 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The role of melt composition on aqueous fluid vs. silicate melt partitioning of bromine in magmas
Volcanogenic halogens, in particular bromine, potentially play an important role in the ozone depletion of the atmosphere. Understanding bromine behaviour in magmas is therefore crucial to properly evaluate the contribution of volcanic eruptions to atmospheric chemistry and their environmental impact. To date, bromine partitioning between silicate melts and the gas phase is very poorly constrained, with the only relevant experimental studies limited to investigation of synthetic melt with silicic compositions. In this study, fluid/melt partitioning experiments were performed using natural silicate glasses with mafic, intermediate and silicic compositions. For each composition, experiments were run with various Br contents in the initial fluid (H2O–NaBr), at T–Pconditions representative of shallow magmatic reservoirs in volcanic arc contexts (100–200MPa, 900–1200◦C). The resulting fluid/melt partition coefficients (DBrf/m) are: 5.0 ±0.3 at 1200◦C–100MPa for the basalt, 9.1 ±0.6 at 1060◦C–200MPa for the andesite and 20.2 ±1.2 at 900◦C–200MPa for the rhyodacite. Our experiments show that DBrf/mincreases with increasing SiO2content of the melt (as for chlorine) and suggest that it is also sensitive to melt temperature (increase of DBrf/mwith decreasing temperature). We develop a simple model to predict the S–Cl–Br degassing behaviour in mafic systems, which accounts for the variability of S–Cl–Br compositions of volcanic gases from Etna and other mafic systems, and shows that coexisting magmatic gas and melt evolve from S-rich to Cl–Br enriched (relative to S) upon increasing degree of degassing. We also report first Br contents for melt inclusions from Etna, Stromboli, Merapi and Santorini eruptions and calculate the mass of bromine available in the magma reservoir prior to the eruptions under consideration. The discrepancy that we highlight between the mass of Br in the co-existing melt and fluid prior to the Merapi 2010 eruption (433 and 73 tons, respectively) and the lack of observed BrO (from space) hints at the need to investigate further Br speciation in ‘ash-rich’ volcanic plumes. Overall, our results suggest that the Br yield into the atmosphere of cold and silicic magmas will be much larger than that from hotter and more mafic magmas.251 120 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Origin of primitive ultra-calcic arc melts at crustal conditions -Experimental evidence on the La Sommata basalt, Vulcano, Aeolian Islands.
(2016-05-03); ; ; ; characterization of ultra-calcic arc melts, equilibrium phase relations have been determined experimentally for the La Sommata basalt (Som-1, Vulcano, Aeolian arc). Som-1 (Na2O + K2O = 4.46 wt.%, CaO = 12.97 wt.%, MgO = 8.78 wt.%, CaO/Al2O3 = 1.03) is a reference primitive ne-normative arc basalt with a strong ultra-calcic affinity. The experiments have been performed between 44 and 154 MPa, 1050 and 1150 °C and from NNO + 0.2 to NNO + 1.9. Fluid-present conditions were imposed with H2O–CO2 mixtures yielding melt H2O concentrations from0.7 to 3.5wt.%. Phases encountered include clinopyroxene, olivine, plagioclase and Fe-oxide. Clinopyroxene is slightly earlier than olivine in the crystallization sequence. It is the liquidus phase at 150 MPa, being joined by olivine on the liquidus between 44 and 88MPa. Plagioclase is the third phase to appear in the crystallization sequence and orthopyroxene was not found. Experimental clinopyroxenes (Fs7–16) and olivines (Fo78–92) partially reproduce the natural phenocryst compositions (respectively Fs5–7 and Fo87–91). Upon progressive crystallization, experimental liquids shift towards higher SiO2 (up to ~55 wt.%), Al2O3 (up to ~18 wt.%) and K2O (up to ~5.5wt.%) and lower CaO,MgO and CaO/Al2O3. Experimental glasses and natural whole-rock compositions overlap, indicating that progressive crystallization of Som-1 type melts can generate differentiated compositions such as those encountered at Vulcano. The lowpressure cotectic experimental glasses reproduce glass inclusions in La Sommata clinopyroxene but contrast with glass inclusions in olivine which preserve basaltic melts more primitive than Som-1. Phase relations for the La Sommata basalt are identical in all critical aspects to those obtained previously on a synthetic ultra-calcic arc composition. In particular, clinopyroxene+olivine co-saturation occurs at very low pressures (≤100 MPa). Ultra-calcic arc compositions do not represent primary mantle melts but result from the interaction between a primary mantle melt and clinopyroxene-bearing rocks in the arc crust. At Vulcano, primitive ultra-calcic end-member melts were generated between 250 and 350 MPa in the lower magma accumulation zone by reaction between hot primitive melts and wehrlitic or gabbroic lithologies. At Stromboli, golden pumices and glass inclusions with an ultra-calcic affinity were also generated at shallow pressures, between 150 and 250 MPa, suggesting that the interaction model is of general significance in the Aeolian arc.66 2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Generation of CO2-rich melts during basalt magma ascent and degassing
(2013-07); ; ; ; To testmechanisms of basalticmagma degassing, continuous decompressions of volatile-bearing (2.7–3.8 wt% H2O, 600–1,300 ppm CO2) Stromboli melts were performed from 250–200 to 50–25 MPa at 1,180–1,140 C.Ascent rates were varied from 0.25 to *1.5 m/s. Glasses after decompression show a wide range of textures, from totally bubblefree to bubble-rich, the latter with bubble number densities from 104 to 106 cm-3, similar to Stromboli pumices. Vesicularities range from 0 to *20 vol%. Final melt H2O concentrations are homogeneous and always close to solubilities. In contrast, the rate of vesiculation controls the finalmelt CO2 concentration. High vesicularity charges have glass CO2 concentrations that follow theoretical equilibrium degassing paths, whereas glasses from low vesicularity charges show marked deviations from equilibrium, with CO2 concentrations up to one order of magnitude higher than solubilities. FTIR profiles and maps reveal glass CO2 concentration gradients near the gas–melt interface. Our results stress the importance of bubble nucleation and growth, and of volatile diffusivities, for basaltic melt degassing. Two characteristic distances, the gas interface distance (distance either between bubbles or to gas–melt interfaces) and the volatile diffusion distance, control the degassing process. Melts containing numerous and large bubbles have gas interface distances shorter than volatile diffusion distances, and degassing proceeds by equilibrium partitioning of CO2 and H2O between melt and gas bubbles. For melts where either bubble nucleation is inhibited or bubble growth is limited, gas interface distances are longer than volatile diffusion distances. Degassing proceeds by diffusive volatile transfer at the gas– melt interface and is kinetically limited by the diffusivities of volatiles in the melt. Our experiments show that CO2-oversaturated melts can be generated as a result of magma decompression. They provide a new explanation for the occurrence of CO2-rich natural basaltic glasses and open new perspectives for understanding explosive basaltic volcanism215 42 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Noble gas solubilities in silicate melts: New experimental results and a comprehensive model of the effects of liquid composition, temperature and pressure
(2010-12-13); ; ; ; New experimental data of Ar and Ne solubility at pressures up to 360 MPa in alkali-basaltic (Mt. Etna, Italy) and rhyolitic (Vulcano Island, Italy) melts are presented. Solubility experiments have been conducted in internally heated pressure vessels at 1200 °C under nominally anhydrous conditions. Ar and Ne contents dissolved in the experimental glasses were then measured by quadrupole mass spectrometry. Over the pressure range investigated, Ar and Ne solubilities vary linearly with Ar and Ne pressures and can be described by Henry's constant (kAr,Ne=PAr, Ne /xAr, Ne, where PAr, Ne is the partial pressure of Ar or Ne and xAr, Ne is the molar fraction of Ar or Ne in the melt) of 7.6±0.8×105 and 1.9±0.4×105 MPa, respectively for Ar and Ne in the basaltic melt and 1.5±0.2×105 and 3.8±0.2×104 MPa, respectively for Ar and Ne in the rhyolitic melt. In accordance with existing models, rhyolitic melts show higher noble gas solubilities than basaltic melts, Ne solubility being higher than that of Ar in a given composition. We propose a semi-empirical model of noble gas (Ar, Ne and He) solubility calibrated on a very large set of measurements in natural and synthetic silicate melts. The model expands the concept of ionic porosity in terms of porosity accessible for noble gas dissolution in melt, taking into account the large-scale structural effects of cations, as well as temperature and pressure. The model is valid over a wide range of temperatures (800–1600 °C), pressures (up to 3 GPa) and compositions, being useful for both geological and physico-chemical studies.114 23 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Role of non-mantle CO2 in the dynamics of volcano degassing: The Mount Vesuvius example
(2009-04); ; ; ; Mount Vesuvius, Italy, quiescent since A.D. 1944, is a dangerous volcano currently characterized by elevated CO2 emissions of debated origin. We show that such emissions are most likely the surface manifestation of the deep intrusion of alkalic-basaltic magma into the sedimentary carbonate basement, accompanied by sidewall assimilation and CO2 volatilization. During the last eruptive period (1631–1944), the carbonate-sourced CO2 made up 4.7–5.3 wt% of the vented magma. On a yearly basis, the resulting CO2 production rate is comparable to CO2 emissions currently measured in the volcanic area. The chemical and isotopic composition of the fumaroles supports the predominance of this crust-derived CO2 in volatile emissions at Mount Vesuvius.210 413 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Carbonatite Melts and Electrical Conductivity in the Asthenosphere
(2008-11); ; ; ; Electrically conductive regions in the Earth mantle have been interpreted to reflect the presence of either silicate melt or water dissolved in olivine. On the basis of laboratory measurements we show that molten carbonates have electrical conductivities that are 3 orders of magnitude higher than those of molten silicate and 5 orders of magnitude higher than those of hydrated olivine. High conductivities in the asthenosphere probably indicate the presence of small amounts of carbonate melt in peridotite and can therefore be interpreted in terms of carbon concentration in the upper mantle. We show that the conductivity of the Oceanic asthenosphere can be explained by 0.1 volume % of carbonatite melts on average, which agrees with the CO2 content of Mid Ocean Ridge Basalts.157 407
