Skip to main content
The search returned 12 results
Now showing 1 - 10 of 12
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Paleoseismic history of the intermountain Rieti Basin (Central Apennines, Italy)

    (Katlenburg-Lindau : European Geophysical Society Katlenburg-Lindau : Copernicus GmbH, 2026-01-15) ; ; ; ;
      9  29
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    New paleoseismological and morphotectonic investigations along the 2018 surface ruptures of the Fiandaca Fault, eastern flank of Etna volcano (Italy)

    (Göttingen: Copernicus Publ., 2025-12-02) ; ; ; ;
    We present the first paleoseismological results along the Fiandaca Fault, source of the 26 December 2018, Mw 5.0 Fleri earthquake. This earthquake caused extensive damage and 8 km of surface faulting. We excavated two exploratory trenches close to the Fiandaca village, in the central segment of the 2018 coseismic rupture. Analysis of trench walls allows identifying, besides the 2018 event, two additional historical surface faulting events. Based on amount of displacement of dated stratigraphic units, including tephra from the 122 BCE eruption, these historical events were similar to the 2018 earthquake. The most recent one occurred in the period 1281–1926 CE, most likely during the1894 earthquake. The oldest one, previously unknown, occurred in the Early Middle Ages (757–894 CE). When compared with the available seismic catalogue for Mt. Etna volcano, this paleoseismic evidence might suggest increased seismic activity along the Fiandaca Fault in the last centuries. In order to test this hypothesis, we conducted detailed morphotectonic analyses and throw rate measurements across offset historical lava flows. In addition, we developed a trishear kinematic model that describes the fault zone and the morphological features of the scarps. Throw rates mean values show an increase from 3.3mmyr􀀀1 since the Greek-Roman period reaching 7.8mmyr􀀀1 since the Late Middle Ages. These findings highlight the needs of further investigations to evaluate the slip rates variations of other faults accommodating the flank instability. Our findings confirm that paleoseismological and morphotectonic studies are of critical value for defining surface faulting and seismic hazard in volcanic settings.
      8  24
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Fault rupture and aseismic creep accompanying the December 26, 2018, Mw 4.9 Fleri earthquake (Mt. Etna, Italy): Factors affecting the surface faulting in a volcano-tectonic environment

    On December 26, 2018 (2:19 UTC), during a volcanic eruption on the Mt. Etna eastern flank (Sicily, southern Italy), the largest instrumental earthquake ever recorded in the volcano ruptured the Fiandaca Fault, with epicenter between Fleri and Pennisi villages (hypocenter at ca. 300 m a. s. l., Mw 4.9). This was the mainshock of an earthquake swarm and it was accompanied by widespread surface faulting and extensive damage along a narrow belt near the fault trace. Few hours after the mainshock, an episodic aseismic creep event occurred along the Aci Platani Fault, a SE extension of the Fiandaca Fault, which caused several damages in the Aci Platani village. We surveyed and mapped the coseismic and aseismic ground ruptures, and collected structural data on their geometry, displacement, and fault zone fabric. We compared the mapped surface ruptures with topography, lithology, and morphology of the buried top of the sedimentary basement. We conclude that the geometry of the volcanic pile influenced the surface expression of faulting during the December 26, 2018 event. The top surface of the marly clay basement should be considered as a detachment surface for shallow sliding blocks. The earthquake occurred on top of a depression of the sedimentary basement forcing the sliding eastward, causing at surface the re-arrangement of the fault strand pattern and deformation style, switching from shear faulting to a tensile failure. The Fleri earthquake therefore provides an unprecedented dataset for 1) understanding active faulting in the European largest onshore volcano, 2) modeling its complex dynamics, and 3) contributing to a more refined surface faulting hazard assessment at Mt. Etna. Results from this investigation might be useful for characterizing capable faulting in similar volcano-tectonic settings worldwide.
      36  229
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    SURE 2.0 - New release of the worldwide database of surface ruptures for fault displacement hazard analyses

    Surface rupturing data from the historical earthquakes is used for obtaining empirical regression parameters for fault displacement hazard assessment. This paper represents an additional compilation and analysis effort, extending the first version of the SUrface Ruptures due to Earthquake (SURE) database. This new release contains slip measurements and mapped surface rupture traces of 50 surface rupturing earthquakes of reverse, normal, and strike-slip kinematics occurred all over the world between 1872 and 2019. As a novelty, a ranking scheme of the rupture features is applied to all the traces and slip measurements in the database. Fault ranking introduces geology as a primary analysis tool and allows the end user to obtain regression parameters suitable for the specific geological conditions at the site of interest. SURE 2.0 dataset consists of a table containing the background information about each earthquake, a table containing the slip measurement data of each event, and a joint shapefile containing all the surface rupture traces of the events in the database.
      109  136
  • Some of the metrics are blocked by your 
    Item type:Product, Access status: Open Access ,
      55  146
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A Worldwide and Unified Database of Surface Ruptures (SURE) for Fault Displacement Hazard Analyses

    Fault displacement hazard assessment is based on empirical relationships that are established using historic earthquake fault ruptures. These relationships evaluate the likelihood of coseismic surface slip considering on-fault and off-fault ruptures, for given earthquake magnitude and distance to fault. Moreover, they allow predicting the amount of fault slip at and close to the active fault of concern. Applications of this approach include land use planning, structural design of infrastructure, and critical facilities located on or close to an active fault. To date, the current equations are based on sparsely populated datasets, including a limited number of pre-2000 events. In 2015, an international effort started to constitute a worldwide and unified fault displacement database (SUrface Ruptures due to Earthquakes [SURE]) to improve further hazard estimations. After two workshops, it was decided to unify the existing datasets (field-based slip measurements) to incorporate recent and future cases, and to include new parameters relevant to properly describe the rupture. This contribution presents the status of the SURE database and delineates some perspectives to improve the surface-faulting assessment. Original data have been compiled and adapted to the structure. The database encompasses 45 earthquakes from magnitude 5–7.9, with more than 15,000 coseismic surface deformation observations (including slip measurements) and 56,000 of rupture segments. Twenty earthquake cases are from Japan, 15 from United States, two from Mexico, Italy, and New Zealand, one from Kyrgystan, Ecuador, Turkey, and Argentina. Twenty-four earthquakes are strike-slip faulting events, 11 are normal or normal oblique, and 10 are reverse faulting.
      278  19
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    EARTHQUAKE RUPTURE ON THE FIANDACA FAULT, DEC. 26, 2018, MW 4.9: FAULT FABRIC ANALYSIS, INTENSITY VS. SURFACE FAULTING, AND HISTORICAL SEISMICITY AT MT. ETNA VOLCANO, ITALY

    On December 26, 2018, a Mw 4.9 earthquake hits the eastern flank of Mount Etna volcano (Sicily). The epicenter is located between the Fleri and Pennisi villages, and focal depth is estimated at 0.3 km (http://cnt.rm.ingv.it/event/21285011). This earthquake is part of a seismic sequence begun on December 23, 2018 and a concurrent phase of volcanic eruption, eventually resulting in lava flows and a dyke intrusion (De Novellis et al., 2019).The earthquake is the result of the activation of the Fiandaca Fault; it is accompanied by widespread surface faulting and secondary environmental effects (Emergeo Working Group, 2019; Figs. 1 - 3), and have a maximum intensity of VIII EMS (Quest WG, 2019).Partial or complete ruptures of the Fiandaca Fault are well-documented in the last 150 years (Fig. 1). The last event that activated the entire structure, as happened in 2018, occurred in 1894 and generated extensive surface faulting and secondary effects (Riccò, 1894; Baratta, 1894; Imbò, 1935).Despite the abundant documentation of previous events, the Fleri earthquake represents the first opportunity to document coseismic effects of a strong, shallow seismic event at Mt. Etna through modern field techniques, sustained by accurate remote-sensed data, including unprecedented InSar measurements.
      114  155
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surface ruptures following the 30 October 2016 Mw 6.5 Norcia earthquake, central Italy

    We present a 1:25,000 scale map of the coseismic surface ruptures following the 30 October 2016 M-w 6.5 Norcia normal-faulting earthquake, central Italy. Detailed rupture mapping is based on almost 11,000 oblique photographs taken from helicopter flights, that has been verified and integrated with field data (>7000 measurements). Thanks to the common efforts of the Open EMERGEO Working Group (130 people, 25 research institutions and universities from Europe), we were able to document a complex surface faulting pattern with a dominant strike of N135 degrees-160 degrees (SW-dipping) and a subordinate strike of N320 degrees-345 degrees (NE-dipping) along about 28km of the active Mt. Vettore-Mt. Bove fault system. Geometric and kinematic characteristics of the rupture were observed and recorded along closely spaced, parallel or subparallel, overlapping or step-like synthetic and antithetic fault splays of the activated fault systems, comprising a total surface rupture length of approximately 46km when all ruptures were considered.
      6034  219
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A database of the coseismic effects following the 30 October 2016 Norcia earthquake in Central Italy

    We provide a database of the coseismic geological surface effects following the Mw 6.5 Norcia earthquake that hit central Italy on 30 October 2016. This was one of the strongest seismic events to occur in Europe in the past thirty years, causing complex surface ruptures over an area of >400 km2. The database originated from the collaboration of several European teams (Open EMERGEO Working Group; about 130 researchers) coordinated by the Istituto Nazionale di Geofisica e Vulcanologia. The observations were collected by performing detailed field surveys in the epicentral region in order to describe the geometry and kinematics of surface faulting, and subsequently of landslides and other secondary coseismic effects. The resulting database consists of homogeneous georeferenced records identifying 7323 observation points, each of which contains 18 numeric and string fields of relevant information. This database will impact future earthquake studies focused on modelling of the seismic processes in active extensional settings, updating probabilistic estimates of slip distribution, and assessing the hazard of surface faulting.
      6104  92
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Quaternary geology and paleoseismology in the Fucino and L’Aquila basins

    This 2 days-long field trip aims at exploring field evidence of active tectonics, paleoseismology and Quaternary geology in the Fucino and L’Aquila intermountain basins and adjacent areas, within the inner sector of Central Apennines, characterized by extensional tectonics since at least 3 Ma. Each basin is the result of repeated strong earthquakes over a geological time interval, where the 1915 and 2009 earthquakes are only the latest seismic events recorded respectively in the Fucino and L’Aquila areas. Paleoseismic investigations have found clear evidence of several past earthquakes in the Late Quaternary to Holocene period. Active tectonics has strongly imprinted also the long-term landscape evolution, as clearly shown by numerous geomorphic and stratigraphic features. Due to the very rich local historical and seismological database, and to the extensive Quaternary tectonics and earthquake geology research conducted in the last decades by several Italian and international teams, the area visited by this field trip is today one of the best studied paleoseismological field laboratories in the world. The Fucino and L’Aquila basins preserve excellent exposures of earthquake environmental effects (mainly surface faulting), their cumulative effect on the landscape, and their interaction with the urban history and environment. This is therefore a key region for understanding the role played by earthquake environmental effects in the Quaternary evolution of actively deforming regions, also as a major contribution to seismic risk mitigation strategies.
      435  118