Skip to main content
The search returned 9 results
Now showing 1 - 9 of 9
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A reappraisal of the 1978 Ferruzzano earthquake (southern Italy) from new estimates of hypocenter location and moment tensor inversion

    The March 11th, 1978 Ferruzzano earthquake is the most recent moderate-to-major earthquake occurred in the southern Calabrian region (southern Italy), one among the highest seismic risk areas of the whole Mediterranean. Previous information available from the literature on the 1978 earthquake is quite contrasting and not well framed in the regional seismotectonic scenario. In the present study we selected and digitized analog seismograms coming from stations of the Euro-Mediterranean region to invert for the deviatoric seismic moment tensor through a time-domain algorithm properly implemented to analyze data recorded before the advent of the digital era. Moreover, we estimated a new hypocentral location by using original bulletin data and a non-linear probabilistic earthquake location technique working with 3D velocity models. The quality and stability of the obtained results, both for hypocenter location and moment tensor inversion, were accurately checked by several inversion tests. Our results indicate that the 1978 earthquake (i) occurred westward and at a shallower depth respect to previous hypocenter locations, (ii) is characterized by a ca. N-S trending normal faulting mechanism and (iii) has a moment magnitude of 4.7, thus suggesting an overestimate of previous evaluations. This study furnishes new information on the 1978 Ferruzzano earthquake allowing to better frame it in the regional seismotectonic scenario and also proves that the time-domain waveform inversion algorithm applied to digitized old seismograms is capable to successfully invert also M w < 5 earthquakes. The obtained results pave the way for future analyses of the early instrumental seismicity potentially capable to furnish new constraints to local and regional seismotectonic modeling.
      84  5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    SEISMOLOGICAL ANALYSIS OF THE 1917 MONTERCHI EARTHQUAKE (CENTRAL APENNINES, ITALY) FOR SEISMOTECTONIC IMPLICATIONS

    On April 26, 1917 at 9:35:59 (GMT) an earthquake occurred in the Sansepolcro Basin (the northernmost portion of the High Tiber Valley - Italy) producing large damages and fatalities. This event, noted as Monterchi earthquake, is well constrained in the Catalogue of Strong Italian Earthquakes (Boschi et al., 2000) by 134 felt reports locations, mainly distributed on the right side of the Tiber Valley, mostly affecting the towns of Monterchi, Citerna and surrounding localities. The maximum and epicentral intensity was determined as Io=IX-X degree of the MCS scale corresponding to an equivalent magnitude of Me=6 that define this event as the most important of the region. The Sansepolcro Basin was generated on the hanging-wall of the Altotiberina Fault (ATF) system. The ATF system is composed by an E-dipping low-angle normal fault, active at least since the Late Pliocene, that represents one of the main regional detachments of the Northern Apennines, and its antithetic W-dipping high-angle normal faults (Barchi, et al., 2009, Boncio et al., 2000). Although the southern part of the ATF was demonstrated to creep (Piccinini et al., 2003), its capability to generate strong or moderate earthquakes is still debated and the historical seismicity that affected the region was not associated to specific geologic sources. For these reasons the study of the Monterchi earthquake plays an important role in the debate. On this light, many authors tried to define the main seismic source parameters through the analysis of historical seismograms and respective bulletins. Preliminary results were presented at previous ECEES, ESC and EGU congresses (Caciagli et al., 2006, Ciaccio et al., 2008, Bernardi et al., 2009). In all these works the hypocentre of the Monterchi earthquake has been substantially unresolved, because of the absolute P and S-phases use, and, for this reason, its epicentre was located 20 km North of the macroseismic one. Concerning the focal mechanism, Bernardi et al. (2009) proposed a moment tensor solution for the Monterchi event, based on almost horizontal recordings from 4 stations situated in a very small azimuthal range. Independently of the validity of the normal fault mechanism proposed by Bernardi et al (2009) their conclusions fit perfectly in the context of the seismotectonic setting of the ATF, but do not account for the discrepancy between the instrumental and the macroseismic epicentres. Today, 49 seismograms from 19 different Euro-Mediterranean observatories are available in the database of the SISMOS Project – INGV (http://sismos.rm.ingv.it/) The BAAS (British Association for Advancement of Sciences) bulletin of 1917, although if incomplete because of the 1st World War, reports a list of 21 seismological observatories that recorded the P and S-phases for this earthquake. Additionally to this database, we included additional arrival-times deriving from further seismic bulletins not contained in the BAAS reports and from directly digitizing original historical seismograms. An incisive approach to analyse these different data allows us to obtain a new, robust and consistent hypocentral solution, coherent with the macroseismic data, in particular by using S-P travel time differences for recordings where the absolute timing is uncertain. An accurate research on the technical characteristics of the recording historical seismometers (period, damping, gain etc), including the analysis of the instrumental natural period recorded in some seismograms, allows to deconvolute the original digitized seismic traces in order to evaluate the potential of moment tensor inversion, to determine the main seismic parameters (Mo, Mw, Circular Fault Radius), and to implement the solution in the framework of the regional tectonic setting.
      185  164
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    How to reduce the old data uncertainty? The 1917 Monterchi (Italy) earthquake case

    Abstract Who works with old seismic data knows that "is faced with a treasure of knowledge hidden in a sea of uncertainties". Synchronization of the historical observatories' internal clocks, instrumental characterizations, bad conservation of original seismograms, geometrical correction and/or assumptions concerning the analogical-to-digital processing are only some of the main sources of uncertainty that conditions the reliability of an earthquake location and/or a well-constrained seismic parameter estimation. These uncertainties are often intrinsic in the historical data and their treatment and propagation into the final seismic parameter estimations are necessary and provide an objective estimate of the quality of the data used. We present our recently published results concerning the M5.8 historical earthquake that struck the high Tiber valley (central Italy) on April, 26, 1917 and discuss the methodological approaches used for the seismic analysis of coeval seismic data. This earthquake, occurred during the World War I, lends itself as a case study to discuss how a good uncertainty estimation and a multidisciplinary approach permit to solve the hard challenge by analyzing a data set affected also by the wartime socio-economical context.
      58  79
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Did the Deadly 1917 Monterchi Earthquake Occur on the Low‐Angle Alto Tiberina (Central Italy) Normal Fault?

    On 26 April 1917, an earthquake Mw 6.0 (known as the Monterchi earthquake) struck the upper Tiber basin, central Italy. This Quaternary basin is situated on the hanging wall of a segmented low‐angle normal fault (LANF) named the Alto Tiberina fault (ATF), whose capability to act with stick‐slip behavior is debated. We reanalyzed instrumental historical data and performed a relocation of the hypocenter along with a reassessment of the scalar moment and magnitudes (⁠Mw and Ms⁠); we calculate the fault radius and stress drop and propose a focal solution based on first‐arrival polarities. The methodologies that we applied strongly take into account the intrinsic uncertainties present in the historical data to obtain solutions that provide well‐defined error estimates. The hypocentral solution is consistent with the known macroseismic scenario and is plausible in terms of root mean square (rms) and error ellipse. The calculated focal depth at ≈8  km⁠, even considering the depth uncertainty of ±4  km⁠, locates the earthquake source inside the ATF footwall. The Mw distribution (median Mw 5.8) suggests an overestimate of the macroseismic Mw probably due to seismic amplification caused by site effects. A preferred focal solution (strike 60/dip 84/ rake −162) defines an antiapenninic‐oriented fault, with predominantly right‐lateral slip. Our results strongly suggest that the 1917 Monterchi earthquake did not nucleate on one of the splays of the low‐angle ATF but rather was generated by a deeper seismic source, which could be referred to as a structural transfer zone responsible for the Quaternary LANF segmentation.
      330  193
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Estimation of Earthquake Parameters in Europe by Using Macroseismic Data: Testing the MEEP Program

    In the frame of the NA-4 module of the European project NERIES, a specific task is devoted to the determination of earthquakes parameters from macroseismic data. On this regard, a new methodology, implemented in the program MEEP, has been developed by Musson et al. (see relevant presentation in this session). Here we present and discuss some tests performed by using the MEEP program in order to contribute to the setting up of the code and to validate the methodology itself. To this purpose, a set of earthquakes occurred in different regions of Europe and with different ranges of magnitude have been selected. In particular, the main aspects investigated here are: • reliability of estimates of epicentre location, magnitude and hypocentral depth compared with instrumental determinations; • comparison with epicentral parameters derived by using other methods based on macroseismic data; • sensitivity of the methodology to number and geographic distribution of available intensity data points (IDPs); • sensitivity to the calibration parameters requested by the program. Results of this analysis suggested some modifications of the program
      198  201
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Whatever Does a M5.8 Earthquake on the Low Angle Normal Altotiberina Fault (ITALY)?

    (Seismological Research Letter, 2015-04-21) ; ; ; ;
    The seismotectonics of the Upper Tiber Valley are dominated by the Altotiberina Fault (ATF), an NE-dipping low-angle normal fault system, and its antithetic W-dipping high-angle normal faults. A lthough the southern part of the ATF was demonstrated to creep, its capability to generate strong or moderate earthquakes is still under debate. On April 26, 1917 at 9:35:59 (GMT) a strong earthquake struck the northernmost portion of the Upper Tiber Valley (Tuscany) producing severe damages and about 20 fatalities. The Catalogue of Strong Italian Earthquakes reports this event as the so-c alled Monterchi earthquake, relating to 134 macroseismic observations, mainly distributed on the western side of the Tiber Valley. The maximum and epicentral intensity was determined as Io=IX- X (MCS), corresponding to an equivalent magnitude of Me=6, that defines this event as the most important of the area. A total of 49 historical seismograms from 19 different Euro-Mediterranean observatories are available in the database of the SISMOS Project - INGV. The BAAS bulletin of 1917 reports a list of 21 seismological observatories that record ed the P and S-phases for this earthquake. We included additional arrival-times deriving from further seismic bulletins - and from digitalizing original historical seismograms. We obtain a new, robust and consistent hypocentral solution, coherent with the macroseismic data, in particular by using S-P travel time differences for recordings where the absolute timing is uncertain. An accurate research on the technical characteristics of the recording historical seismometers (period, dampin g, gain etc.), allowed to deconvolve the original digitalized seismic traces (i) to determine the main seismic parameters (Mo, Mw, Circular Fault Radius), (ii) to constrain the possible source mechanism, by a combination of first motion analysis and modelling of synthetic seismograms, and (iii) to implement the solution in the framework of the regional tectonic setting.
      101  49
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Rimini earthquake of 17th May 1916 (Italy): from historical data to seismic parameters.

    (2008-09-07) ; ;
    Caciagli, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Bologna, Bologna, Italia
    ;
    Batllò, J.; Istitut Geològic de Catalunya
    ;
    The earthquake of 17th May 1916 at 12:50 hours (GMT) is the first event of a seismic sequence that struck the northeastern coast of Italy (in particular the towns of Rimini and Cattolica) and lasted until December of the same year. The Catalogue of Strong Italian Earthquakes (http://storing.ingv.it/cfti4med/) classifies 132 locations in regard to this earthquake which had a maximum and epicentral intensity equal to the VIII degree of MCS scale, with magnitude equivalent to 5.8. During the First World War, the ISS bulletin was unpublished and the available epicentral location was derived only from macroseismic analysis. In this work we col-lected the bulletins available from Euro-Mediterranean observatories and we performed the first instru-mental location for this event. This event is amongst the high priority earthquakes included in the Euro-seismos project (http://storing.ingv.it/es_web). In the database of the SISMOS Project – INGV (http://sismos.ingv.it) 50 recordings from 20 different Euro-Mediterranean observatories are available today for this earthquake. The analysis of all these data allowed us to obtain a reassessment of the main seismological parameters (MW, MS) and a re-location of the epicenter. Preliminary results suggest an east forward migration of previous location of the epicenter and a probable underestimation of the magnitude consigned into the catalogues. Special attention was devoted to determining the error margins of the obtained results. A comparison between these parameters and that extrapolated from macroseismic data will be discussed.
      673  565
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Un Catalogo Sismico Europeo Unificado, NERIES NA4: Progresos en la Peninsula Iberica

    (2008-02-11) ; ; ; ;
    Batllo, J.; Institut Geologic de Catalunya, Barcelona
    Within the European Project NERIES, sponsored by the European Commission in the frame of the Specific Programme "Structuring the European Research Area", the NA4 module is devoted to establish a distributed archive of historical earthquake. NA4 objectives are to establish the required tools leading to the compilation of a comprehensive, digital macroseismic intensity database for the largest European earthquakes (with magnitude >=5.8 at least) and a validated and homogeneous European parametric earthquake catalogue for M>=5, to serve as an authoritative reference for users involved in the assessment of seismic hazard and risk. The main focus is devoted to the time-window before 1900. Some highlights about the whole NA4 project, actual state of the initiatives undertaken in the Iberian Peninsula to contribute to it and future developments are presented.
      143  211
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The SHARE European Earthquake Catalogue (SHEEC) 1000-1899

    In the frame of the European Commission project “Seismic Hazard Harmonization in Europe” (SHARE), aiming at harmonizing seismic hazard at a European scale, the compilation of a homogeneous, European parametric earthquake catalogue was planned. The goal was to be achieved by considering the most updated historical dataset and assessing homogenous magnitudes, with support from several institutions. This paper describes the SHARE European Earthquake Catalogue (SHEEC), which covers the time-window 1000-1899. It strongly relies on the experience of the European Commission project “Network of Research Infrastructures for European Seismology” (NERIES), a module of which was dedicated to create the European “Archive of Historical Earthquake Data” (AHEAD) and to establish methodologies to homogenously derive earthquake parameters from macroseismic data. AHEAD has supplied the final earthquake list, obtained after sorting duplications out and eliminating many fake events, and the most updated historical dataset. Macroseismic data points (MDPs) provided by AHEAD have been processed with updated, repeatable procedures, regionally calibrated against a set of recent, instrumental earthquakes, to obtain earthquake parameters. From the same data, a set of epicentral intensity-to-magnitude relations has been derived, with the aim of providing another set of homogeneous Mw estimates. Then, a strategy focussed on maximizing the homogeneity of the final epicentral location and Mw, has been adopted. Special care has been devoted also to supply location and Mw uncertainty. The paper focuses on the procedure adopted for the compilation of SHEEC and briefly comments on the achieved results.
      1240  768