Analysis of Bent Wire Antenna Resonant Frequency for Different Bent Angles
Author(s)
Language
English
Obiettivo Specifico
5A. Ricerche polari e paleoclima
Status
Published
JCR Journal
JCR Journal
Peer review journal
Yes
Journal
Issue/vol(year)
12/54 (2019)
Pages (printed)
1240-1251
Date Issued
December 2019
Subjects
Abstract
For the bedrock survey in the temperate glacier regions, low frequency antenna system of the
airborne ground penetrating RADAR plays a very important role. A small size antenna, working at 10 MHz,
would make its use easier in various radar applications. Reducing the resonant frequency of the wire
dipole antenna structure, without increasing the physical size, can be attained by introducing bents in the
existing structure. This paper introduces a new bent wire dipole antenna and presents the effects of bent
angle of 80°, 70°, 60°, 50°, 45° and 40°of the wire antenna on the antenna parameters such as resonant
frequency, S11, VSWR, gain and radiation pattern. A broadband four element equivalent circuit model of a
straight dipole is used with some modifications in the R, L, C equations for the new bent wire dipole antenna
by utilizing the bent angle. The frequency response of the equivalent circuit model, calculated resonant
frequency values using the equations and the simulated results of the bent wire dipole antenna is compared
and analyzed. As the antenna placement area inside the anechoic chamber is limited, the size of the
10MHz antenna has been scaled down by a factor of 0.01. This modifies the resonant frequency of the new
structure to 1GHz. The scaled down antenna system are simulated, analyzed and tested in a GTEM cell. For
bandwidth improvement of the 10 MHz antenna, a lumped element matching circuit has been designed
and simulated.
airborne ground penetrating RADAR plays a very important role. A small size antenna, working at 10 MHz,
would make its use easier in various radar applications. Reducing the resonant frequency of the wire
dipole antenna structure, without increasing the physical size, can be attained by introducing bents in the
existing structure. This paper introduces a new bent wire dipole antenna and presents the effects of bent
angle of 80°, 70°, 60°, 50°, 45° and 40°of the wire antenna on the antenna parameters such as resonant
frequency, S11, VSWR, gain and radiation pattern. A broadband four element equivalent circuit model of a
straight dipole is used with some modifications in the R, L, C equations for the new bent wire dipole antenna
by utilizing the bent angle. The frequency response of the equivalent circuit model, calculated resonant
frequency values using the equations and the simulated results of the bent wire dipole antenna is compared
and analyzed. As the antenna placement area inside the anechoic chamber is limited, the size of the
10MHz antenna has been scaled down by a factor of 0.01. This modifies the resonant frequency of the new
structure to 1GHz. The scaled down antenna system are simulated, analyzed and tested in a GTEM cell. For
bandwidth improvement of the 10 MHz antenna, a lumped element matching circuit has been designed
and simulated.
Type
article
File(s)![]()
Name
2019-RadioScience-BentWireAntenna.pdf
Size
26.55 MB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
c99cf2e8ec8187a5d776633898e3ca06
