TLS POINT CLOUDS TEXTURING: THE MANUAL OF MATCHING VIEWER SOFTWARE
Author(s)
Sponsors
INGV
Language
English
Obiettivo Specifico
1.10. TTC - Telerilevamento
Status
Published
Peer review journal
Yes
Date Issued
November 2010
Series/Report No.
2010
169
Abstract
A time-of-flight terrestrial laser scanner (TLS) works like a laser rangefinder but is also able to scan a
surface with a selected sampling step, leading to a point cloud defined into an internal reference frame.
Moreover, radiometric information about signal returns intensity is provided, computed in terms of the ratio
between emitted and received pulse intensities. Besides the geometric and radiometric data, some TLS
instruments, equipped by an internal or an external calibrated camera, are able to provide also the RGB
information by mean of a texturing procedure, i.e. a procedure of point cloud coloring.
In general, the mapping of a 2D RGB image onto a digital surface model during 3D rendering,
increases the realism of the resulting model. The point cloud texturing is currently used in TLS observation
aimed to cultural heritage study and preservation (see e.g. Beraldin et al., 2002). The texturing procedure
consists in camera calibration and orientation. The camera calibration models the true parameters of the
camera (i.e. focal length, format size, principal point, and lens distortion, see e.g. Tsai 1986, 1987), whereas
the orientation process leads to the position and angles of the camera with respect to the point cloud
reference frame.
Pairs of corresponding points, visible both in the captured RGB image and in the corresponding point
cloud can be selected and used to solve for the calibration parameters of the camera in a the least square
approach. Depending on the unknown quantities that must be obtained, in particular the availability of
calibration parameters of the camera for the considered field, the procedure requires the detection of some or
several pairs of corresponding points. In some cases, 13 parameters could be necessary, and at least 20 pair
of points are therefore needed to have an adequate redundancy in the least square computation.
The Optech ILRIS 3D (Optech, 2010) is a TLS instrument characterized by good performance in long
range acquisition (up to 1200 m), which is equipped with an internal integrated camera (3 megapixel) to
provide the RGB information and therefore allow the point cloud texturing. The format of the data directly
provided by a TLS instrument is specific for the instrument. In order to allow their importation by the
standard data processing software packages (e.g. Innovmetric PolyWorks, I-Site Studio, Leica Cyclone. For
a list of available packages see e.g. GIM, 2009), a parsing procedure is necessary. In the case of ILRIS
instrument, the parsing procedure is implemented in Optech Parser software and is well described also in the
short manual provided by Pesci et al. (2009), where significant information about the planning and the
definition of a reasonable acquisition protocol of a TLS measurement is also provided. A new feature
available in Optech Parser allows the point cloud texturing, by means of 2D images captured at the scanning
epoch by the internal camera by using the camera calibration certificate of the integrated camera. In
particular, to perform the computations, the "texture image" and the “texture calibration parameter” files
have to be used. The first file is the image automatically stored by the scanner and the second one is provided
by Optech (Optech, inc). If these two files are directly used, the texturing procedure is completely automatic.
Nevertheless, in some cases a high accuracy in RGB data treatment is necessary, and the recognition of an
adequate number of pairs of corresponding point must be carried out by means of Optech Matching Viewer
software package (Optech, inc). The Matching Viewer package is able to provide a texture calibration
parameter file for a fine texturing.
This technical report describes in detail the procedure for point cloud texturing using images from an
external calibrated digital camera and Matching Viewer. In particular, the Nikon reflex D50, which is
characterized by 28-mm focal length and 8.0 megapixel resolution. A TLS survey of the Santo Stefano
historical square of Bologna city, aimed to provide the high resolution acquisition of Corte Isolani Palace, is
performed. Figure 1 shows the external camera mounted on the ILRIS instrument during the survey. The
scanner handle is shaped to allow the high precision installation of a camera on a calibrated position.
Anyway the mechanical components lead to alignment errors to be corrected by means of a specific
matching procedure described in the following.
surface with a selected sampling step, leading to a point cloud defined into an internal reference frame.
Moreover, radiometric information about signal returns intensity is provided, computed in terms of the ratio
between emitted and received pulse intensities. Besides the geometric and radiometric data, some TLS
instruments, equipped by an internal or an external calibrated camera, are able to provide also the RGB
information by mean of a texturing procedure, i.e. a procedure of point cloud coloring.
In general, the mapping of a 2D RGB image onto a digital surface model during 3D rendering,
increases the realism of the resulting model. The point cloud texturing is currently used in TLS observation
aimed to cultural heritage study and preservation (see e.g. Beraldin et al., 2002). The texturing procedure
consists in camera calibration and orientation. The camera calibration models the true parameters of the
camera (i.e. focal length, format size, principal point, and lens distortion, see e.g. Tsai 1986, 1987), whereas
the orientation process leads to the position and angles of the camera with respect to the point cloud
reference frame.
Pairs of corresponding points, visible both in the captured RGB image and in the corresponding point
cloud can be selected and used to solve for the calibration parameters of the camera in a the least square
approach. Depending on the unknown quantities that must be obtained, in particular the availability of
calibration parameters of the camera for the considered field, the procedure requires the detection of some or
several pairs of corresponding points. In some cases, 13 parameters could be necessary, and at least 20 pair
of points are therefore needed to have an adequate redundancy in the least square computation.
The Optech ILRIS 3D (Optech, 2010) is a TLS instrument characterized by good performance in long
range acquisition (up to 1200 m), which is equipped with an internal integrated camera (3 megapixel) to
provide the RGB information and therefore allow the point cloud texturing. The format of the data directly
provided by a TLS instrument is specific for the instrument. In order to allow their importation by the
standard data processing software packages (e.g. Innovmetric PolyWorks, I-Site Studio, Leica Cyclone. For
a list of available packages see e.g. GIM, 2009), a parsing procedure is necessary. In the case of ILRIS
instrument, the parsing procedure is implemented in Optech Parser software and is well described also in the
short manual provided by Pesci et al. (2009), where significant information about the planning and the
definition of a reasonable acquisition protocol of a TLS measurement is also provided. A new feature
available in Optech Parser allows the point cloud texturing, by means of 2D images captured at the scanning
epoch by the internal camera by using the camera calibration certificate of the integrated camera. In
particular, to perform the computations, the "texture image" and the “texture calibration parameter” files
have to be used. The first file is the image automatically stored by the scanner and the second one is provided
by Optech (Optech, inc). If these two files are directly used, the texturing procedure is completely automatic.
Nevertheless, in some cases a high accuracy in RGB data treatment is necessary, and the recognition of an
adequate number of pairs of corresponding point must be carried out by means of Optech Matching Viewer
software package (Optech, inc). The Matching Viewer package is able to provide a texture calibration
parameter file for a fine texturing.
This technical report describes in detail the procedure for point cloud texturing using images from an
external calibrated digital camera and Matching Viewer. In particular, the Nikon reflex D50, which is
characterized by 28-mm focal length and 8.0 megapixel resolution. A TLS survey of the Santo Stefano
historical square of Bologna city, aimed to provide the high resolution acquisition of Corte Isolani Palace, is
performed. Figure 1 shows the external camera mounted on the ILRIS instrument during the survey. The
scanner handle is shaped to allow the high precision installation of a camera on a calibrated position.
Anyway the mechanical components lead to alignment errors to be corrected by means of a specific
matching procedure described in the following.
References
Androni D.C., Pinto L., 2006. Il Texture mapping del Battistero di Cremona ottenuto con riprese
fotogrammetriche digitali e laser scanner terrestre, ASITA X Nat. Conf., Bolzano, Italy.
Beraldin, J.-A., Picard, M., El-Hakim, S.F., Godin, G., Valzano, V., Bandiera, A., Latouche, D. (2002).
Virtualizing a Byzantine Crypt by Combining Highresolution Textures with Laser Scanner 3D Data. in
Proceedings of VSMM 2002, Gyeongju, Korea. September 25-27, 2002, pp. 3-14.
Bornaz L., Lingua A., Rinaudo F. (2002) “Calibrazione di immagini non metriche mediante l’uso dei dati
laser scanner terrestri”. Atti della 6a Conferenza Nazionale ASITA “Geomatica per l'ambiente, il
territorio e il patrimonio culturale”, vol. I, Perugia, pp.. 493 – 498.
GIM (2009) GIM International terrestrial laser scanner product survey. Available online at: http://www.giminternational.
com/files/productsurvey_v_pdfdocument_33.pdf (accessed: 22.06.2010).
Innovmetric, 2010. Innovmetric PolyWorks software description.
http://www.innovmetric.com/polyworks/3D-scanners/home.aspx (accessed: 10.06.2010).
OPTECTM ILRIS-3D Operation Manual (2006). Optech Incorporated Industrial & 3D Imaging Division,
0040170/Rev A, 1-147.
Optech, 2010. ILRIS 3D laser scanner description. Available online at: http://www.optech.ca/prodilris.htm
(accessed: 10.10.2010).
Pesci, A., Loddo, F., Conforti, D. (2007). The first terrestrial laser scanner survey over Vesuvius: the high
resolution model of volcano crater (Napoli, Italy). International Journal of Remote Sensing, 28, 1, 203-
219.
Pesci A., Teza G., and Ventura G. (2008). Remote sensing of volcanic terrains by terrestrial laser scanner:
preliminary reflectance and RGB implications for studying Vesuvius crater (Italy). Annals of
Geophysics, Vol. 51, Num. 4, August 2008, pp. 633-653.
Sabry El-Hakim, 2005. A practical approach to creating precise and detailed 3D models from single and
multiple views. CIPA XX Int. Symp., Turin, Italy.
Tsai, R.Y. (1986). An Efficient and Accurate Camera Calibration Technique for 3D Machine Vision.
Proceedings of IEEE Conference on Computer Vision and Pattern Recognition, Miami Beach, FL, pp.
364-374
Tsai, R.Y. (1987). Metrology Using Off-the-Shelf TV Cameras and Lenses. IEEE Journal of Robotics and
Automation, 3, 4, 323-344.
fotogrammetriche digitali e laser scanner terrestre, ASITA X Nat. Conf., Bolzano, Italy.
Beraldin, J.-A., Picard, M., El-Hakim, S.F., Godin, G., Valzano, V., Bandiera, A., Latouche, D. (2002).
Virtualizing a Byzantine Crypt by Combining Highresolution Textures with Laser Scanner 3D Data. in
Proceedings of VSMM 2002, Gyeongju, Korea. September 25-27, 2002, pp. 3-14.
Bornaz L., Lingua A., Rinaudo F. (2002) “Calibrazione di immagini non metriche mediante l’uso dei dati
laser scanner terrestri”. Atti della 6a Conferenza Nazionale ASITA “Geomatica per l'ambiente, il
territorio e il patrimonio culturale”, vol. I, Perugia, pp.. 493 – 498.
GIM (2009) GIM International terrestrial laser scanner product survey. Available online at: http://www.giminternational.
com/files/productsurvey_v_pdfdocument_33.pdf (accessed: 22.06.2010).
Innovmetric, 2010. Innovmetric PolyWorks software description.
http://www.innovmetric.com/polyworks/3D-scanners/home.aspx (accessed: 10.06.2010).
OPTECTM ILRIS-3D Operation Manual (2006). Optech Incorporated Industrial & 3D Imaging Division,
0040170/Rev A, 1-147.
Optech, 2010. ILRIS 3D laser scanner description. Available online at: http://www.optech.ca/prodilris.htm
(accessed: 10.10.2010).
Pesci, A., Loddo, F., Conforti, D. (2007). The first terrestrial laser scanner survey over Vesuvius: the high
resolution model of volcano crater (Napoli, Italy). International Journal of Remote Sensing, 28, 1, 203-
219.
Pesci A., Teza G., and Ventura G. (2008). Remote sensing of volcanic terrains by terrestrial laser scanner:
preliminary reflectance and RGB implications for studying Vesuvius crater (Italy). Annals of
Geophysics, Vol. 51, Num. 4, August 2008, pp. 633-653.
Sabry El-Hakim, 2005. A practical approach to creating precise and detailed 3D models from single and
multiple views. CIPA XX Int. Symp., Turin, Italy.
Tsai, R.Y. (1986). An Efficient and Accurate Camera Calibration Technique for 3D Machine Vision.
Proceedings of IEEE Conference on Computer Vision and Pattern Recognition, Miami Beach, FL, pp.
364-374
Tsai, R.Y. (1987). Metrology Using Off-the-Shelf TV Cameras and Lenses. IEEE Journal of Robotics and
Automation, 3, 4, 323-344.
Type
report
File(s)![]()
Name
rapporto169.pdf
Description
report
Size
1 MB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
33d6e7f643a0268eefa5d2aacc4c81b2
