Liquefaction Mitigation of Silty Sands Using Rammed Aggregate Piers Based on Blast-Induced Liquefaction Testing

To investigate the liquefaction mitigation capability of rammed aggregate piers (RAP) in silty sand, blast liquefaction testing was
performed at a soil profile treated with a full-scale RAP group relative to an untreated soil profile. The RAP group consisted of 16 piers in a 4 × 4
arrangement at 2 m center-to-center spacing extending to a depth of 9.5 m. Blasting around the untreated area induced liquefaction (ru ≈ 1.0)
from a 3 to 11 m depth, producing several large sand boils and causing a settlement of 10 cm. In contrast, the installation of the RAP group
reduced excess pore water pressure (ru ≈ 0.75), eliminated sand ejecta, and reduced the average settlement to between 2 and 5 cm when
subjected to the same blast charges. Although the liquefaction-induced settlement in the untreated area could be accurately estimated using
an integrated cone penetration test (CPT)-based settlement approach, settlement in theRAPtreated area was significantly overestimated with the
same approach, even after considering RAP treatment-induced densification. Analyses indicate that settlement after RAP treatment could be
successfully estimated from liquefaction-induced compression of the sand and RAP acting as a composite material. This test program identifies
a mechanism that explains how the settlement was reduced for the RAP group despite the elevated ru values in the silty sands that are often
difficult to improve with vibratory methods.