Funiciello, Francesca
Preferred name
Funiciello, Francesca
17 results
The search returned 17 results
Now showing 1 - 10 of 17
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Asperity size and neighboring segments can change the frictional response and fault slip behavior: insights from laboratory experiments and numerical simulations
Accurate assessment of the rate and state friction parameters of rocks is essential for producing realistic earthquake rupture scenarios and, in turn, for seismic hazard analysis. Those parameters can be directly measured on samples, or indirectly based on inversion of coseismic or postseismic slip evolution. However, both direct and indirect approaches require assumptions that might bias the results. Aiming to reduce the potential sources of bias, we take advantage of a downscaled analog model reproducing megathrust earthquakes. We couple the simulated annealing algorithm with quasi-dynamic numerical models to retrieve rate and state parameters reproducing the recurrence time, rupture duration and slip of the analog model, in the ensemble. Then, we focus on how the asperity size and the neighboring segments’ properties control the seismic cycle characteristics and the corresponding variability of rate and state parameters. We identify a tradeoff between (a-b) of the asperity and (a-b) of neighboring creeping segments, with multiple parameter combinations that allow mimicking the analog model behavior. Tuning of rate and state parameters is required to fit laboratory experiments with different asperity lengths. Poorly constrained frictional properties of neighboring segments are responsible for uncertainties of (a-b) of the asperity in the order of per mille. Roughly one order of magnitude larger uncertainties derive from asperity size. Those results provide a glimpse of the variability that rate and state friction estimates might have when used as a constraint to model fault slip behavior in nature.70 68 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Shear‐Velocity Structure and Dynamics Beneath the Sicily Channel and Surrounding Regions of the Central Mediterranean Inferred From Seismic Surface Waves
The evolution of the Sicily Channel Rift Zone (SCRZ) is thought to accommodate the regional tectonic stresses of the Calabrian subduction system. Much of the observations we have today are either limited to the surface or to the upper crust or deeper from regional seismic tomography, missing important details about the lithospheric structure and dynamics. It is unclear whether the rifting is passive from far-field extensional stresses or active from mantle upwelling beneath. We measure Rayleigh-and Love-wave phase velocities from ambient seismic noise and invert for 3-D shear-velocity and radial anisotropic models. Variations in crustal S-velocities coincide with topographic and tectonic features. The Tyrrhenian Sea has a ∼10 km thin crust, followed by the SCRZ (∼20 km). The thickest crust is beneath the Apennine-Maghrebian Mountains (∼55 km). Areas experiencing extension and intraplate volcanism have positive crustal radial anisotropy (VSH > VSV); areas experiencing compression and subduction-related volcanism have negative anisotropy. The crustal anisotropy across the Channel shows the extent of the extension. Beneath the Tyrrhenian Sea, we find very low sub-Moho S-velocities. In contrast, the SCRZ has a thin mantle lithosphere underlain by a low-velocity zone. The lithosphere-asthenosphere boundary rises from 60 km depth beneath Tunisia to ∼33 km beneath the SCRZ. Negative radial anisotropy in the upper mantle beneath the SCRZ is consistent with vertical mantle flow. We hypothesize a more active mantle upwelling beneath the rift than previously thought from an interplay between poloidal and toroidal fluxes related to the Calabrian slab, which in turn produces uplift at the surface and induces volcanism.45 125 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The EPOS Multi-Scale Laboratories: A FAIR Framework for stimulating Open Science practice across European Earth Sciences Laboratories
The Multi-scale Laboratories (MSL) are a network of European laboratories bringing together the scientific fields of analogue modeling, paleomagnetism, experimental rock and melt physics, geochemistry and microscopy. MSL is one of ten Thematic Core Services (TCS) of the European Plate Observing System (EPOS). The overarching goal of EPOS is to establish a comprehensive multidisciplinary research platform for the Earth sciences in Europe. It aims at facilitating the integrated use of data, models, and facilities, from both existing and new distributed pan European Research Infrastructures, allowing open access and transparent use of data. The TCS MSL network allows researchers to collaborate with other labs and scientists through the transnational Access (TNA) program. By becoming part of the rapidly growing TCS MSL network, new laboratories are offered a platform to showcase their research data output, laboratory equipment and information, and the opportunity to open laboratories to guest researchers through the Transnational Access (TNA) program. The EPOS Multi-scale laboratories offer researchers a fully operational data publication chain tailored to the specific needs of laboratory research, from a bespoke metadata editor, through dedicated, domain-specific) data repositories, to the MSL Portal showcasing these citable data publications. During this pro-cess the data publications are assigned with DOI, published with open licenses (e.g. CC BY 4.0) and described with standardized and machine-readable rich metadata (following the FAIR Principles to make research data Findable, Accessible, Interoperable and Reusable. . The TCS MSL is currently working on linking these data publications to the EPOS Central Portal, the main discovery and access point for European multi disciplinary data, and on increasing the number of connected data repositories.145 85 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Transnational Access to Research Facilities: an EPOS service to promote multi‑domain Solid Earth Sciences in Europe
Transnational access (TNA) allows cross-border, short-term and frequently free-of-charge access to world-class research facilities, to foster collaborations and exchanges of experience. Specifically, TNA aims to encourage open science and innovation and to increase the efficient and effective use of scientific infrastructure. Within EPOS, the European Plate Observing System, the Volcano Observatories and Multi-scale Laboratories communities have offered TNA to their high-quality research facilities through national and European funding. This experience has allowed the definition, design, and testing of procedures and activities needed to provide transnational access inn the EPOS context. In this paper, the EPOS community describes the main objectives for the provision of transnational access in the EPOS framework, based on previous experiences. It includes practical procedures for managing transnational access from a legal, governance, and financial perspective, and proposes logistical and technical solutions to effectively execute transnational access activities. In addition, it provides an outlook on the inclusion of new thematic communities within the TNA framework, and addresses the challenges of providing market-driven access to industry.270 179 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Predicting imminence of analog megathrust earthquakes with Machine Learning: Implications for monitoring subduction zones
Subduction zones are monitored using space geodesy with increasing resolution, with the aim of better capturing the deformation accompanying the seismic cycle. Here, we investigate data characteristics that maximize the performance of a machine learning binary classifier predicting slip‐event imminence. We overcome the scarcity of recorded instances from real subduction zones using data from a seismotectonic analog model monitored with a spatially dense, continuously recording onshore geodetic network. We show that a 70‐85 km wide coastal swath recording interseismic deformation gives the most important information on slip imminence. Prediction performances are mainly influenced by the alarm duration (amount of time that we consider an event as imminent), with density of stations and record length playing a secondary role. The techniques developed in this study are most likely applicable in regions of slow‐earthquakes, where stick‐slip‐like failures occur at time intervals of months to years.237 188 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Empirical Analysis of Global-Scale Natural Data and Analogue Seismotectonic Modelling Data to Unravel the Seismic Behaviour of the Subduction Megathrust
Subduction megathrusts host the Earth’s greatest earthquakes as the 1960 Valdivia (Mw 9.5, Chile), the largest earthquake instrumentally recorded, and the recent 2004 Sumatra- Andaman (Mw 9.2, Indonesia), 2010 Maule (Mw 8.8, Chile), and 2011 Tohoku-Oki (Mw 9.1, Japan) earthquakes triggering devastating tsunamis and representing a major hazard to society. Unravelling the spatio-temporal pattern of these events is thus a key for seismic hazard assessment of subduction zones. This paper reviews the current state of knowledge of two research areas–empirical analysis of global-scale natural data and experimental data from an analogue seismotectonic modelling—devoted to study causeeffect relationships between subduction zone parameters and the megathrust seismogenic behavior. The combination of the two approaches overcomes the observational bias and inherent sampling limitations of geological processes (i.e., shortness of instrumental and historical data, decreasing completeness and resolution with time into the past) and allows drawing appropriately from multiple disciplines with the aim of highlighting the geodynamic conditions that may favor the occurrence of giant megathrust earthquakes.226 69 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Machine Learning can predict the timing and size of analog earthquakes
Despite the growing spatio‐temporal density of geophysical observations at subduction zones, predicting the timing and size of future earthquakes remains a challenge. Here, we simulate multiple seismic cycles in a laboratory‐scale subduction zone. The model creates both partial and full margin ruptures, simulating magnitude Mw 6.2‐8.3 earthquakes with a coefficient of variation in recurrence intervals of 0.5, similar to real subduction zones. We show that the common procedure of estimating the next earthquake size from slip‐deficit is unreliable. On the contrary, Machine Learning predicts well the timing and size of laboratory earthquakes by reconstructing and properly interpreting the spatio‐temporally complex loading history of the system. These results promise substantial progress in real earthquake forecasting, as they suggest that the complex motion recorded by geodesists at subduction zones might be diagnostic of earthquake imminence.266 334 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Multivariate statistical analysis to investigate the subduction zone parameters favoring the occurrence of giant megathrust earthquakes
The observed maximum magnitude of subduction megathrust earthquakes is highly variable worldwide. One key question is which conditions, if any, favor the occurrence of giant earthquakes (M w ≥ 8.5). Here we carry out a multivariate statistical study in order to investigate the factors affecting the maximum magnitude of subduction megathrust earthquakes. We find that the trench-parallel extent of subduction zones and the thickness of trench sediments provide the largest discriminating capability between subduction zones that have experienced giant earthquakes and those having significantly lower maximum magnitude. Monte Carlo simulations show that the observed spatial distribution of giant earthquakes cannot be explained by pure chance to a statistically sig- nificant level. We suggest that the combination of a long subduction zone with thick trench sediments likely promotes a great lateral rupture propagation, characteristic for almost all giant earthquakes.498 136 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Where giant earthquakes may come
Giant earthquakes ($M_W \geq 8.5$) usually occur on the boundary between subducting and overriding plates of converging margins, but it is not yet clear which (if any) subduction zones are more prone to produce such a kind of events. Here we show that subduction zones may have different capabilities to produce giant earthquakes. We analyze the frequency-magnitude distribution of the interplate earthquakes at subduction zones that occurred during 1976-2007, and calculate the propensity (defined as the average annual rate) of giant events for about half of the subduction zones. We find that the $b$-value of interplate earthquakes is significantly different among the subduction zones, and out-of-sample giant earthquakes (before 1976 and after 2007) have occurred preferentially in high propensity areas. Besides the importance for seismic hazard assessment and risk mitigation, our results seems to indicate that a higher seismicity rate does not necessarily implies a higher likelihood to generate giant earthquakes, and the way in which the stress is released at subduction interface does not change significantly after the occurrence of such events.215 177 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Relation between subduction megathrust earthquakes, trench sediment thickness and upper plate strain
(2012); ; ; ; Giant earthquake (moment magnitude Mw >=8.5) forecasts for subduction zones have been empirically related to both tectonic stresses and geometrical irregularities along the subduction interface. Both of these controls have been suggested as able to tune the ability of rupture to propagate laterally and, in turn, exert an important control on giant earthquake generation. Here we test these hypotheses, and their combined influence, by compiling a dataset of trench fill thickness (a proxy for smoothing of subducting plate relief by sediment input into the subduction channel) and upper plate strain (a proxy for the tectonic stresses applied to the subduction interface) for 44 segments of the global subduction network. We statistically compare relationships between upper plate strain, trench sediment thickness and maximal earthquake magnitude. We find that the combination of both large trench fill (≥1 km) and neutral upper plate strain explains spatial patterns of giant earthquake occurrence to a statistically significant degree. In fact, the concert of these two factors is more highly correlated with giant earthquake occurrence than either factor on its own. Less frequent giant earthquakes of lower magnitude are also possible at subduction zones with thinner trench fill and compressive upper plate strain. Extensional upper plate strain and trench fill < 0.5 km appear to be unfavorable conditions, as giant earthquakes have not been observed in these geodynamical environments during the last 111 years.103 498
