Skip to main content
The search returned 5 results
Now showing 1 - 5 of 5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    2010-2014 Seismic activity images the activated fault system in the Pollino area, at the Appennines-Calabrian arc boundary region

    The main goal of this study is to increase the understanding of the physical mechanisms behind the ongoing seismic activity in the Pollino area and its influence on the seismic hazard of the Apennines-Calabrian arc boundary region. The study area, near the Pollino massif, is located at the northernmost edge of the Calabrian Arc, which is the last oceanic subduction segment along the Africa-Eurasian plate. The subduction results from the sinking of the Ionian oceanic plate beneath the Calabrian Arc-Southern Tyrrhenian Sea and is part of the fragmented tectonic boundary between two macro-plates: Africa and Eurasia. The subduction geometry is well-documented by several seismological studies (i.e. Chiarabba et al., 2005), and the lithospheric structure of the area is quietly well known (i.e. Totaro et al., 2014 and Piana Agostinetti and Amato, 2009) Despite the slow N-S convergence between these major plates, the Southern Tyrrhenian Sea is a large basin characterized by E-W extensional tectonic. Since Late Miocene, the Calabrian Arc slab experienced rapid rollback, moving E to SE at a rate of 5-6 cm/yr, which is by far higher than the ~1-2 cm/yr rate of convergence between Africa and Europa (Faccenna et al., 2004). However, during late Pleistocene, rollback and subduction have slowed and is likely proceeding at less than 1 cm/yr (D’Agostino and Selvaggi., 2004). Geodetic measurements show that the Pollino Range is subject to NE-SW anti-apenninic extension. In the region the strain rate field shows a continuous belt of extensional deformation that follows the ridge of the Southern Apennines and extends in the Pollino region. The extension rate appears to decrease from the Southern Apennines to the Calabria- Lucania border region (D’Agostino et al., 2013). This finding indeed reveals that the Pollino region is deforming and accumulating tectonic strain which results in a complex system of normal active faults striking sub-parallel to the Apennines. Two principal normal faults are present in the Italian Database of the Individual Seismogenic Sources DISS version 3.1.1 (DISS Working Group, 2010) in the Pollino area: the Pollino (P) fault and the “Rimendiello-Mormanno” (RM) fault system. The RM fault is an active seismogenic structure it strikes about NNW-SSE and dips toward NE; it has hosted in its northernmost part a M 5.0 earthquake on 9th September 1998. The P fault has similar strike but dips toward SW: it shows no recent seismicity and is hence one of the most prominent seismic gaps in the Italian historical seismic catalogue (Rovida et al., 2011). Paleoseismic studies have shown that the P fault was active in the last ten thousand years and is capable to produce events with magnitude above 6.0. The DISS database reports as debated source also the Piana Perretti fault (Brozzetti et al., 2009). A detailed structural map of the area interested by the seismic sequence shows three fault systems (Brozzetti et al., 2013) consisting of several aligned fault segments that have been active during the Late Pleistocene and are reasonably presently active. The first fault system strikes NW-SE and dips toward SW (including the Piana Perretti fault at the NE edge of the Mercure Basin), the second one has similar strike and NE dip, while the third one strikes about E-W. Earthquakes reported in the historical catalogues for this area are not very strong. Few earthquakes with magnitude probably less than 6 affected the area, including the Mw=5.6 “Mercure” event in 1998 (Brozzetti et al., 2009). The Parametric Catalogue of Italian earthquakes (CPTI11, Rovida et al., 2011), shows very well the lack of strong earthquakes in the region: there is a clear evidence of large earthquakes in the Campania-Basilicata area (M~7.0) and several strong earthquakes in the Sila region and in the whole Calabrian territory. According to the seismic classification of the national territory, the area affected by the 2010-2014 seismic activity have a relatively higher probability to be shaken by a strong acceleration (Gruppo di Lavoro MPS, 2004). Most of the seismic events occurred in areas where the peak ground acceleration having 10% chance of being exceeded in next 50 years is between the values of 0.225 g and 0.275 g.
      478  349
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    SEISMIC SWARM vs MAINSHOCK‐AFTERSHOCKS SEQUENCE: REFINED HYPOCENTERS LOCATIONS AT THE APENNINES‐CALABRIAN ARC BOUNDARY (SOUTHERN ITALY)

    In the last years the Apennines-Calabrian arc boundary has been affected by intense seismicity concentrated in the Pollino mountain region. The Pollino is located at the northernmost edge of the Calabrian Arc, the last remnant of subduction along the Africa- Eurasian boundary. The area is subject to Northeast- Southwest extension, which results in a complex system of normal faults striking Northwest-Southeast, nearly parallel to the Apenninic mountain range. The Italian Seismic Network between 2010 and 2014 detected more than 5500 earthquakes in the area (Italian Seismological Instrumental and Parametric Data- Base; http:// iside .rm .ingv .it). In 2010 and 2011 the earthquake rate has been variable, with increasing and decreasing phases and maximum magnitudes below M=4. On May 28th 2012, a shallow event with local magnitude of 4.3 struck, about 5 kilometers east of the previous swarm. The seismic activity remained concentrated in the M=4.3 source region until early August. At that time seismicity jumped back westward to the previous area, with several earthquakes of magnitude larger than 3, culminating with a M=5.0 earthquake on 25 October 2012. The seismic rate remained high for some months, but aftershock magnitudes did not exceed magnitude 3.7. The seismic rate then suddenly decreased at the beginning of 2013 and stayed quite low for the rest of the year up to the beginning of 2014. During these years several temporary seismic stations were deployed in the area, improving the detecting threshold of the Italian Seismic Network and giving us the opportunity to refine the location of the earthquakes hypocenters. A combined dataset, including three-component seismic waveforms recorded by both permanent and temporary stations, has been analyzed in order to obtain an appropriate 1-D and 3D velocity model for earthquake location in the study area. Here we describe the main seismological characteristics of this seismic sequence and, relying on refined earthquakes location, we make inferences on the geometry of the fault system responsible for the two strongest shocks. Swarm activity seems to occur on a diffuse crustal volume more than on fault planes. To yield a better understanding of the origin of the ongoing seismic activity in the Pollino area, using thousand of seismograms, we analyze vp and vp/vs models and anisotropic parameters in the crust. The main goal of this study is to increase the understanding of the physical mechanisms behind the seismic swarm and its influence on the seismic hazard of the Apennines- Calabrian arc boundary region.
      486  764
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Pollino seismic sequence: Can shear wave anisotropy monitoring help earthquakes forecast?

    (2013-09-01) ; ; ; ;
    Pastori, Marina; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    Since the late the late ’60s-early ’70s era seismologists started developed theories that included variations of the elastic property of the Earth crust and the state of stress and its evolution crust prior to the oc- currence of a large earthquake. Among the others the theory of the dilatancy (Scholz et al., 1973): when a rock is subject to stress, the rock grains are shifted generating micro-cracks, thus the rock itself in- creases its volume. Inside the fractured rock, fluid saturation and pore pressure play an important role in earthquake nucleation, by modulating the effective stress. Thus measuring the variations of wave speed and of anisotropic parameter in time can be highly informative on how the stress leading to a major fault failure builds up. In 80s and 90s such kind of research on earthquake precursor slowed down and the priority was given to seismic hazard and ground motions studies, which are very important since these are the basis for the building codes in many countries. Today we have dense and sophisticated seismic networks to measure wave-fields characteristics: we archive continuous waveform data recorded at three components broad-band seismometers, we almost routinely obtain high resolution ear- thquake locations. Therefore we are ready to start to systematically look at seismic-wave propagation properties to possibly reveal short-term variations in the elastic properties of the Earth crust. In active fault areas and volcanoes, tectonic stress variation influences fracture field orientation and fluid migration processes, whose evolution with time can be monitored through the measurement of the anisotropic pa- rameters ( Piccinini et al., 2006). Through the study of S waves anisotropy it is therefore potentially possible to measure the presence, migration and state of the fluid in the rock traveled by seismic waves, thus providing a valuable route to understanding the seismogenic phenomena and their precursors (Crampin & Gao, 2010). Variations of anisotropic parameter and of the ratio between the compressional (P-wave) and the shear (S-wave) seismic velocities, the Vp/Vs (Nur, 1972) have been recently observed and measured during the preparatory phase of a major earthquake (Lucente et al. 2010). Here we show the anisotropic parameters at station MMN during the Pollino seismic sequence 2010-2013.
      160  904
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The 2011–2014 Pollino Seismic Swarm: Complex Fault Systems Imaged by 1D Refined Location and Shear Wave Splitting Analysis at the Apennines–Calabrian Arc Boundary

    In the years between 2011 and 2014, at the edge between the Apennines collapsing chain and the subducting Calabrian arc, intense seismic swarms occurred in the Pollino mountain belt. In this key region, <2.5mm/yr of NE-trending extension is accommodated on an intricate network of normal faults, having almost the same direction as the mountain belt. The long-lasting seismic release consisted of different swarm episodes, where the strongest event coinciding with a ML 5.0 shock occurred in October 2012. This latter comes after a ML four nucleated in May 2012 and followed by aseismic slip episodes. In this study, we present accurate relocations for ∼6,000 earthquakes and shear-wave splitting analysis for ∼22,600 event-station pairs. The seismicity distribution delineates two main clusters around the major shocks: in the north-western area, where the ML 5.0 occurred, the hypocenters are localized in a ball-shaped volume of seismicity without defining any planar distribution, whilst in the eastern area, where the ML 4.3 nucleates, the hypocenters define several faults of a complex system of thrusts and back-thrusts. This different behavior is also imaged by the anisotropic parameters results: a strong variability of fast directions is observed in the western sector, while stable orientations are visible in the eastern cluster. This tectonic system possibly formed as a positive flower structure but as of today, it accommodates stress on normal faults. The deep structure imaged by refined locations is overall consistent with the complex fault system recently mapped at the surface and with patterns of crustal anisotropy depicting fractures alignment at depth. The possible reactivation of inherited structures supports the important role of the Pollino fault as a composite wrench fault system along which, in the lower Pleistocene, the southward retreat of the ionian slab was accommodated; in this contest, the inversion of the faults kinematics indicates a probable southward shift of the slab edge. This interpretation may help to comprehend the physical mechanisms behind the seismic swarms of the region and defining the seismic hazard of the Pollino range: nowadays a region of high seismic hazard although no strong earthquakes are present in the historical record.
      1191  75
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Pollino seismic sequence/swarm

    In the years between 2010 and 2015 in the Apennines-Calabrian arc boundary, in the Pollino massif, a long seismic sequence took place. The area is subject to Northeast- Southwest extension, which results in a complex system of normal faults striking Northwest-Southeast, nearly parallel to the Apenninic mountain range. The seismic sequence includes more than 6000 earthquakes in the Pollino region, the maximum magnitude recorded is Ml=5.0 and it happened in October 25th 2012 after about two years of ongoing activity; the peculiar temporal evolution of the seismic sequence allows us to catalogue it as a swarm. Here we describe the main seismological characteristics of this seismic sequence and characterise the fracture field of the region. We analyse thousands of seismograms, deriving accurate locations crust velocity model and anisotropic parameters in the crust. These parameters yield clues and insights that may help understanding the physical mechanisms behind the seismic swarm. Since the late 60s-early 70s era seismologists started developing theories that included variations of the elastic properties of the Earth crust and the state of stress and its evolution prior to the occurrence of a large earthquake. Among the others the theory of the dilatancy: when a rock is subject to stress, the rock grains are shifted generating microcracks, thus the rock itself increases its volume. Inside the fractured rock, fluid saturation and pore pressure play an important role in earthquake nucleation, by modulating the effective stress. Thus, measuring the variations of wave speed and of anisotropic parameter in time can be highly informative on how the stress leading to a major fault failure builds up. We systematically look at seismic-wave propagation properties to possibly reveal short-term variations in the elastic properties of the Earth crust. In active fault areas, tectonic stress variation influences fracture field orientation and fluid migration processes, whose evolution over time can be monitored through the measurement of the anisotropic parameters. We analysed waveforms recorded at permanent and temporary stations hold by the Istituto Nazionale di Geofisica e Vulcanologia.
      198  119