Skip to main content
The search returned 47 results
Now showing 1 - 10 of 47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Structurally-Controlled Permeability Evolution and Mineralization in Geothermal Caprocks: The Fenice Capanne Mining District (Southern Tuscany, Italy)

    (American Geophysical Union, 2026-08) ; ; ; ;
    The Neogene mineralized region of the Colline Metallifere in southern Tuscany (Italy) provides a natural laboratory to investigate feedback between fluid-rock interaction, structurally controlled fluid flow, and hydrothermal ore mineralization. This study focuses on the Fe-Cu-Pb-Zn deposit of Fenice Capanne, located south of the active Larderello-Travale geothermal system, where marly-limestone caprocks of the Liguride Complex preserve evidence of permeability creation and destruction above a regional geothermal reservoir. A multidisciplinary approach was applied to reconstruct the evolution of the hydrothermal system. Two main alteration stages were identified. An early prograde, high-temperature skarn metasomatism was associated with the growth of clinopyroxene-garnet assemblages and characterized by substantial gains in Si, Fe, Mn, and Ca, resulting in a large volume increase (up to ∼400%). Reaction-induced fracturing generated secondary permeability, which superimposed on primary permeability related to bedding and lithological anisotropies, enhancing hydraulic connectivity. A subsequent retrograde stage, below ∼300°C, was driven by mixing between meteoric and saline magmatic-derived fluids, or those derived from evaporite interaction, and resulted in renewed fracturing, brecciation, and extensive quartz-sulphide veining. These processes recorded cyclic variations in fluid composition, redox conditions, salinity, and boiling associated with transient pressure drops during hydraulic fracturing. Overall, the Ligurian marly-limestone sequence evolved from a low-permeability sedimentary seal into a reactive mineralized system capable of sustaining transient hydrothermal circulation. Structural connectivity controlled by faulting and reaction-induced fracturing governed both permeability evolution and mineralization. These results demonstrate that sedimentary caprocks can behave as dynamic components of the hydrothermal systems, with important implications for geothermal fluid flow, metal transport, and reservoir evolution. Plain Language Summary Geothermal systems rely on impermeable rock layers, known as caprocks, to trap hot fluids at depth and allow heat to be exploited. These caprocks are usually considered stable and, long-lasting seals. However, in tectonically active regions, faults and circulating hot fluids can change their physical and chemical properties, potentially allowing fluids to escape. In this study, we investigate the Fenice Capanne mining district in southern Tuscany (Italy), a hydrothermal system near the active Larderello-Travale geothermal field. By studying rocks that were once part of a geothermal caprock and are now exposed at the surface, we reconstruct how faulting and fluid-rock interaction altered permeability over time. Our results show that chemical reactions between rocks and hot fluids caused volume expansion, fracturing, and repeated opening and sealing of fluid pathways within originally low-permeability rocks. These processes temporarily transformed the caprock into a fluid conduit, allowing hydrothermal fluids to circulate, mix, and locally deposit metals such as iron, copper, lead, and zinc. This study demonstrates that caprocks are not always passive barriers but can behave as dynamic systems whose permeability is transient and evolve in space and time. Understanding how and when caprocks sustain structural permeability is important for improving geothermal reservoir models and predicting mineralization in geothermal environments.
      2  13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Earthquake dynamics sustained by seismic CO2

    (London: Nature Publishing Group-Springer Nature, 2026-02-14) ; ; ; ;
    Seismic faults paradoxically combine high frictional strength, which promotes stress accumulation and should hinder slip, with large seismic displacements. Among proposed dynamic weakening mechanisms, shear heating is crucial because it triggers decarbonation and CO₂ production. In carbonate faults, this process generates transient CO₂ pressurization that canmodulate rupture dynamics and promote supershear propagation, yet the amount and pressure of produced CO₂ remain poorly quantified. We investigate carbonate faults in the Apennines, Italy, a region affected by Mw≤7.1 earthquakes. Integrating nano-scale observations of fault surfaces with mineralogical and isotopic constraints, we develop a stoichiometric-thermodynamic model linking seismic decarbonation to Mw 5.9–6.5 earthquakes. Individual events can produce up to 12 tons of CO₂, generating quasi-lithostatic pressures ( ~ 196MPa) under undrained confinement and supra-hydrostatic pressures (76–134MPa) under drained conditions. Here, we conclude that seismic CO₂ pressurization can sustain dynamic slip and enhance the destructive potential of earthquakes in carbonate terrains.
      4  9
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Selective clast survival in an experimentally-produced pseudotachylyte

    On-fault processes during earthquakes contribute to seismic rupture propagation and slip. Here we investigate clast fragmentation in an experimental pseudotachylyte (solidified seismic melt) produced with a rotary shear machine. We slid for 0.44 m (corresponding to Mw ≥ 6 earthquakes), at slip rates > 1 m/s, pre-cut samples of quartz + phyllosilicates + plagioclase + sillimanite + garnet -bearing ultramylonite, that hosts pseudotachylytes in nature. The ultramylonite minerals extensively preserved as clasts in the experimental pseudotachylyte are quartz, plagioclase, and sillimanite. Garnet is scarcely preserved, despite having a melting temperature similar to plagioclase, probably due to having low thermal shock resistance. This selective clast survival is identical to the one found in the natural pseudotachylytes. Based on these experimental observations and assuming non-equilibrium melting, the preservation of a mineral, as a clast, in the melt appears to be controlled by its thermal shock properties as well as by its melting temperature. Since the mechanical effects of rupture propagation in these experiments were negligible, we conclude that, for Mw ≥ 6 earthquakes, (i) frictional slip and heating of the slipping zone plus (ii) thermomechanical properties of minerals, rather than fault rupture processes, control mineral comminution and clast survival in frictional melts.
      68  261
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Active Faulting and Deep‐Seated Gravitational Slope Deformation in Carbonate Rocks (Central Apennines, Italy): A New “Close‐Up” View

    Active faulting and deep-seated gravitational slope deformation (DGSD) are common geological hazards in mountain belts worldwide. In the Italian central Apennines, kilometer-thick carbonate sedimentary sequences are cut by major active normal faults that shape the landscape, generating intermontane basins. Geomorphological observations suggest that the DGSDs are commonly located in fault footwalls. We selected five mountain slopes affected by DGSD and exposing the footwall of active seismogenic normal faults exhumed from 2 to 0.5 km depth. Field structural analysis of the slopes shows that DGSDs exploit preexisting surfaces formed both at depth and near the ground surface by tectonic faulting and, locally, by gravitational collapse. Furthermore, the exposure of sharp scarps along mountain slopes in the central Apennines can be enhanced either by surface seismic rupturing or gravitational movements (e.g., DGSD) or by a combination of the two. At the microscale, DGSDs accommodate deformation mechanisms similar to those associated with tectonic faulting. The widespread compaction of micro-grains (e.g., clast indentation), observed in the matrix of both normal faults and DGSD slip zones, is consistent with clast fragmentation, fluid-infiltration, and congruent pressuresolution active at low ambient temperatures (<60°C) and lithostatic pressures (<80 MPa). Although clast comminution is more intense in the slip zones of normal faults because of the larger displacement accommodated, we are not able to find microstructural markers that allow us to uniquely distinguish faults from DGSDs.
      121  59
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Meso- to nano-scale evidence of fluid-assisted co-seismic slip along the normal Mt. Morrone Fault, Italy: Implications for earthquake hydrogeochemical precursors

    Fluids play an important role in seismic faulting both at hypocentral depths during earthquake nucleation and at shallower crustal levels during rupture propagation. Pre- to co-seismic anomalies of crustal fluid circulation have been identified by hydrogeochemical and seismological monitoring and interpreted as potential precursors of strong earthquakes. To shed light on the role of fluids in seismic and precursory mechanisms, the active carbonate-hosted principal slip zone (7-8 cm thick) of the exhumed (exhumation < 3 km) normal Mt. Morrone Fault (central Apennines) has been investigated with a multi-disciplinary approach from the macro- to the nano-scale. The distal slip zone consists of white cementitious calcite-rich bands and red cataclastic bands composed of dolomite and calcite clasts embedded in a clay-rich matrix. The proximal slip zone consists of subparallel ultracataclastic layers separated by sharp slip surfaces. The ultracataclastic layers mutually inject/overprint, bearing evidence of granular fluidization, dolomite thermal decomposition, and clay amorphization. Fluid inclusions and the distribution of both trace and major elements reveal the inflow of both shallow and deep external fluids into the slip zone. Presumably, the deep fluids originated from a magmatic-like source and ascended along the fault during pre-seismic dilation and seismic ruptures, interacting with shallow phyllosilicate-rich flysch deposits and the fluids hosted within them. In this context, vanadium-rich fluidized microlayers along the exhumed Mt. Morrone Fault are reminiscent of vanadium-rich potential hydrogeochemical precursors arose in the shallow aquifers of the study area since a few months before the 2016 Mw 6.0 Amatrice earthquake.
      227  34
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Grain size and grain size distribution of a lithified fault core in carbonates rocks using multi-scale image analysis: The example of the San Benedetto-Gioia dei Marsi fault (Central Italy)

    Analyses of three oriented rock samples collected in the footwall of a major normal fault in Central Italy provide insights into textural properties of a lithified carbonate fault core. Data from lithified fault rocks are very rare and we document here the grain size distribution in a fault core at an unprecedented scale range, which complements already existing observations obtained from sieve, sedimentation and/or laser diffraction methods in loose deposits. X-ray powder diffraction analysis shows that the samples, which are located at a mutual distance of few tens of meters, are exclusively made of calcite. Mesoscopic samples and polished thin sections oriented normal to the fault plane have been analysed with high resolution scanner (HRS), transmission optical microscopy (TOM) and scanning electron microscopy in back-scattered mode (BS-SEM). Textural features of tectonised calcite crystals have been quantified using image analysis on digitalised photographs at magnifications from 1:1 to 9000:1, documenting size dimensions of grains from cm to sub-μm. The obtained D values have average values of 1.65 in 2D, overlapping with those independently obtained by box-counting methods in the core of the same fault by previous authors. Textures of calcite clasts in tectonised and lithified rocks can be appropriately quantified by the analytical protocols proposed here. This work represents the first multi-scale image analysis, from sub- μm to cm sizes, of the core portion of a normal fault that cut into carbonate rocks. Our study provides a template for similar investigations to be carried on other faults that will help to better understand the relations between fault textures and deformation processes.
      102  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Nanomechanical characterization of K-basalt from Roman comagmatic province: A preliminary study

    Basedonatomicforcemicroscopy(AFM),contactresonanceAFM(CR-AFM)isanondestructivetechniquethatallows one to perform single point measurements as well as surface mapping of the indentation modulus of a material. In this work we exploit the possibility to use CR-AFM to study synthetic materials representative of K-basalt from Roman comagmatic Province. Havingobservedthepresenceofsubsurfacevoidsandinclusionsatmicrometerandsub-micrometerscale,apreliminarystudyhas been conducted to verify the capability of CR-AFM nanomechanical mapping to nondestructively detect these features.
      133  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Brucite-driven CO 2 uptake in serpentinized dunites (Ligurian Ophiolites, Montecastelli, Tuscany)

    Understanding the mechanism of serpentinite weathering at low temperature – that involves carbonate formation – has become increasingly important because it represents an analog study for a cost-efficient carbon disposal strategy (i.e. carbon mineralization technology or mineral Carbon dioxide Capture and Storage, CCS). At Montecastelli (Tuscany, Italy), on-going spontaneous mineral CO2 sequestration is enhanced by brucite-rich serpentinized dunites. The dunites are embedded in brucite-free serpentinized harzburgites that belong to the ophiolitic Ligurian Units (Northern Apennine thrust-fold belt). Two main serpentinization events produced two distinct mineral assemblages in the reactive dunite bodies. The first assemblage consists of low-T pseudomorphic, mesh-textured serpentine, Fe-rich brucite (up to 20 mol.% Fe(OH)2) and minor magnetite. This was overprinted by a non-pseudomorphic, relatively high-T assemblage consisting of serpentine, Fe-poor brucite (ca. 4 mol% Fe(OH)2) and abundant magnetite. The harzburgite host rock developed a brucite-free paragenesis made of serpentine and magnetite. Present-day interaction of serpentinized dunites with slightly acidic and oxidizing meteoric water, enhances brucite dissolution and leads to precipitation of both Mg-Fe layered double hydroxides (coalingite-pyroaurite, LDHs) and hydrous Mg carbonates (hydromagnesite and nesquehonite). In contrast, the brucite-free serpentinized harzburgites are not affected by the carbonation process. In the serpentinized dunites, different carbonate minerals form depending on brucite composition (Fe-rich vs Fe-poor). Reactions in serpentinized dunites containing Fe-rich brucite produce a carbonate assemblage dominated by LDHs and minor amount of hydromagnesite. Serpentinites with a Fe-poor brucite assemblage contain large amounts of hydromagnesite and minor LDHs. Efficiency of CO2 mineral sequestration is different in the two cases owing to the distinct carbon content of LDHs (ca. 1.5 wt.%) and hydromagnesite (ca. 10 wt.%). Here, for the first time, we link the mineral composition of serpentinized ultramafic rocks to carbonate formation, concluding that Fe-poor brucite maximizes the mineral CCS efficiency.
      74  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Field- to nano-scale evidence for weakening mechanisms along the fault of the 2016 Amatrice and Norcia earthquakes, Italy

    In August and October 2016, two normal fault earthquakes (Mw 6.0 and Mw 6.5, respectively) struck the Amatrice-Norcia area in the central Apennines, Italy. The mainshocks nucleated at depths of ~ 7–9 km with the co-seismic slip propagating upward along the Mt. Gorzano Fault (MGF) and Mt. Vettore Fault System (MVFS). To recognize possible weakening mechanisms along the carbonate-hosted seismogenic faults that generated the Amatrice-Norcia earthquakes, the fresh co-seismic fault exposure (i.e., “nastrino”) exposed along the Mt. Vettoretto Fault was sampled and analyzed. This exposed fault belongs to the MVFS and was exhumed from ~ 2–3 km depth. Over the fresh fault surface, phyllosilicates concentrated and localized along mm- to μm-thick layers, and truncated clasts and fluid-like structures were found. At the nano-scale, instead of their common platy-lamellar crystallographic texture, the analyzed phyllosilicates consist of welded nm-thick nanospherules and nanotubes similar to phyllosilicates deformed in rotary shear apparatus at seismic velocities or altered under high hydrothermal temperatures (> 250 °C). Moreover, the attitude of the Mt. Vettoretto Fault and its kinematics inferred from exposed slickenlines are consistent with the co-seismic fault and slip vectors obtained from the focal mechanisms computed for the 2016 mainshocks. All these pieces of evidence suggest that the Mt. Vettoretto Fault slipped seismically during past earthquakes and that co-seismic slip was assisted and facilitated at depths of < 3 km by phyllosilicate-rich layers and overpressured fluids. The same weakening processes may also have been decisive in facilitating the co-seismic slip propagation during the 2016 Mw 6.0 Amatrice and Mw 6.5 Norcia earthquakes. The microstructures found along the Mt. Vettoretto Fault, which is certainly a seismogenic fault, provide a realistic synoptic picture of co-seismic processes and weakening mechanisms that may occur in carbonate-hosted seismogenic faults.
      88  5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Timescales of magmatic processes prior to the ∼4.7 ka Agnano-Monte Spina eruption (Campi Flegrei caldera, Southern Italy) based on diffusion chronometry from sanidine phenocrysts

    Barium diffusion chronometry applied to sanidine phenocrysts from the trachytic Agnano-Monte Spina eruption (∼4.7 ka) constrains the time between reactivation and eruption of magma batches in the Campi Flegrei caldera. Backscattered electron imaging and quantitative electron microprobe measurements on 50 sanidine phenocrysts from representative pumice samples document core-to-rim compositional zoning. We focus on compositional breaks near the crystal rims that record magma mixing processes just prior to eruption. Diffusion times were modeled at a magmatic temperature of 930 °C using profiles based on quantitative BaO point analyses, X-ray scans, and grayscale swath profiles, yielding times ≤60 years between mixing and eruption. Such short timescales are consistent with volcanological and geochronological data that indicate that at least six eruptions occurred in the Agnano-San Vito area during few centuries before the Agnano-Monte Spina eruption. Thus, the short diffusion timescales are similar to time intervals between eruptions. Therefore, the rejuvenation time of magma residing in a shallow reservoir after influx of a new magma batch that triggered the eruption, and thus pre-eruption warning times, may be as short as years to a few decades at Campi Flegrei caldera.
      173  1