Dellino, Pierfrancesco
Preferred name
Dellino, Pierfrancesco
Main Affiliation
ORCID
18 results
The search returned 18 results
Now showing 1 - 10 of 18
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , New evidence of syn-eruptive magma-carbonate interaction: the case study of the Pomici di Avellino eruption at Somma-Vesuvius (Italy)
(2024); ; ; ; Fornelli, AnnamariaCalcareous lithics are commonly found within the products of some explosive eruptions of Somma-Vesuvius. The pumice fragments from the final phase of the Plinian fallout event of the Pomici di Avellino eruption contain abundant calcareous xenoliths. Previous work on that eruption, including numerical simulations, suggested that the release of CO 2 from the entrapment of carbonates may have prolonged the magmatic phase of the eruption by maintaining sufficient driving pressure in the feeding dike. The texture and thermo-metamorphic reactions of carbonate xenolith-bearing pumice fragments of the Pomici di Avellino eruption are analyzed through petrography, scanning electron microscope images, energy dispersive spectrometer analyses, and micro-computed X-ray tomography to deduce the behavior of short-term carbonate-magma interaction and its contribution to the eruption dynamics. Results show that calcareous xenoliths experienced short-term magma-carbonate interaction, which took place in three steps: (i) entrainment, i.e., the mechanical process of carbonate xenoliths entrapment into a magma; (ii) decarbonation, related to high-temperature decomposition reaction of the xenoliths; and (iii) digestion or dissolution of the incorporated calcareous xenoliths into the melt with diffusion of Ca and Mg. The CO 2 released during the syn-eruptive decarbonation process thus provided extra volatiles to the rising magma, which may have maintained magma buoyancy longer than expected if only magmatic volatiles were involved in the eruption.8 107 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Assessing long-term tephra fallout hazard in southern Italy from Neapolitan volcanoes
(2023); ; ; ; Selva, JacopoNowadays, modeling of tephra fallout hazard is coupled with probabilistic analysis that takes into account the natural variability of the volcanic phenomena in terms of eruption probability, eruption sizes, vent position, and meteorological conditions. In this framework, we present a prototypal methodology to carry out the long-term tephra fallout hazard assessment in southern Italy from the active Neapolitan volcanoes: Somma–Vesuvius, Campi Flegrei, and Ischia. The FALL3D model (v.8.0) has been used to run thousands of numerical simulations (1500 per eruption size class), considering the ECMWF ERA5 meteorological dataset over the last 30 years. The output in terms of tephra ground load has been processed within a new workflow for large-scale, high resolution volcanic hazard assessment, relying on a Bayesian procedure, in order to provide the mean annual frequency with which the tephra load at the ground exceeds given critical thresholds at a target site within a 50-year exposure time. Our results are expressed in terms of absolute mean hazard maps considering different levels of aggregation, from the impact of each volcanic source and eruption size class to the quantification of the total hazard. This work provides for the first time, a multi-volcano probabilistic hazard assessment posed by tephra fallout, comparable with those used for seismic phenomena and other natural disasters. This methodology can be applied to any other volcanic areas or over different exposure times, allowing researchers to account for the eruptive history of the target volcanoes that, when available, could include the occurrence of less frequent large eruptions, representing critical elements for risk evaluations.102 131 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Sedimentological analysis of ash-rich pyroclastic density currents, with special emphasis on sin-depositional erosion and clast incorporation: The Brown Tuff eruptions (Vulcano, Italy)
The sedimentological, lithological and textural characteristics of the Brown Tuffs (BT) pyroclastic deposits, combined with their grain-size, componentry and geochemical glass compositions, are here investigated to obtain information on the transport and depositional mechanisms of the corresponding pyroclastic density currents (PDCs). The BT are widespread reddish-brown to grey, ash-rich pyroclastic deposits generated by pulsating hydromagmatic explosive activity from the La Fossa Caldera on Vulcano island during the c. 80–6 ka time-stratigraphic interval, and then distributed on most of the Aeolian Islands and Capo Milazzo peninsula (Sicily) and in the Tyrrhenian and Adriatic Sea regions. Near the source area on Vulcano, the BT are characterised by alternating massive and planar to cross stratified lithofacies that result from the stepwise, repeating aggradation of discrete PDC pulses. This alternance is regulated by either fluid escape or granular flow depositional regimes at high clast concentration or grain by grain traction deposition in thewaning diluted stages of the PDCs. Most of the BT on Vulcano showintermittently stratified and massive ash deposits resulting froma pervasive post-depositional disruption of the primary structures. This is induced by upward fluid expulsion associated with dissipation of pore pressure between layers at different grain size (fine to coarse ash) and porosity, as outlined by distinctive upwards bends and pillar-type escape structures through the fluid-filled cracks and rupture points. Massive BT deposits with a faint colour and grain-size banding are widely recognised on Lipari, the nearby island of Vulcano. Based on the presence, at the base of BT depositional units, of cm-thick amalgamation bands containing pumice lapilli, scoria and lithic clasts ripped-up and embedded from the loose underlying pyroclastic units, they are interpreted as deposited by ash-rich PDCs laterally spreading from La Fossa Caldera and moving to Lipari.During their motion to Lipari these currents (likely) crossed a narrow and shallow sea-water inlet which did not stop their advancement but influenced the grain size distribution of those spreading on the Lipari mainland. In this paper, the mechanism of clast erosion and incorporation is outlined across the whole island of Lipari by means of field study, grain-size, and geochemical glass analyses on the different components of the mixed basal bands of the BT. This suggests that the BT PDCs maintained enough flow power as to erode the substratum, hence likely impacting the territory, over a distance up to at least 16–17 km from the volcanic source. Evidence that the BT PDCs exerted a high shear-stress over the loose substratum is also provided by undulated, recumbent flame and rip-up structures at the base of some depositional units in southern and central Lipari. In order to form such bed granular instabilities between the BT and the underlying deposits we calculate that the currents had at least a shear velocity of ca. 2 m s−1 and a shear stress in the range of 1‐4.5 kPa. These results add new insights on the large-scale hazard at the Aeolian Islands and shed new lights on the widespread transport and depositional dynamics of ash flows spreading over the sea and reaching nearby islands, and their interactions with the substratum and the pre-depositional topography. The sedimentological, lithological and textural characteristics of the Brown Tuffs (BT) pyroclastic deposits, combined with their grain-size, componentry and geochemical glass compositions, are here investigated to obtain information on the transport and depositional mechanisms of the corresponding pyroclastic density currents (PDCs). The BT are widespread reddish-brown to grey, ash-rich pyroclastic deposits generated by pulsating hydromagmatic explosive activity from the La Fossa Caldera on Vulcano island during the c. 80–6 ka time-stratigraphic interval, and then distributed on most of the Aeolian Islands and Capo Milazzo peninsula (Sicily) and in the Tyrrhenian and Adriatic Sea regions. Near the source area on Vulcano, the BT are characterised by alternating massive and planar to cross stratified lithofacies that result from the stepwise, repeating aggradation of discrete PDC pulses. This alternance is regulated by either fluid escape or granular flow depositional regimes at high clast concentration or grain by grain traction deposition in thewaning diluted stages of the PDCs. Most of the BT on Vulcano showintermittently stratified and massive ash deposits resulting froma pervasive post-depositional disruption of the primary structures. This is induced by upward fluid expulsion associated with dissipation of pore pressure between layers at different grain size (fine to coarse ash) and porosity, as outlined by distinctive upwards bends and pillar-type escape structures through the fluid-filled cracks and rupture points. Massive BT deposits with a faint colour and grain-size banding are widely recognised on Lipari, the nearby island of Vulcano. Based on the presence, at the base of BT depositional units, of cm-thick amalgamation bands containing pumice lapilli, scoria and lithic clasts ripped-up and embedded from the loose underlying pyroclastic units, they are interpreted as deposited by ash-rich PDCs laterally spreading from La Fossa Caldera and moving to Lipari. During their motion to Lipari these currents (likely) crossed a narrow and shallow sea-water inlet which did not stop their advancement but influenced the grain size distribution of those spreading on the Lipari mainland. In this paper, the mechanism of clast erosion and incorporation is outlined across the whole island of Lipari by means of field study, grain-size, and geochemical glass analyses on the different components of the mixed basal bands of the BT. This suggests that the BT PDCs maintained enough flow power as to erode the substratum, hence likely impacting the territory, over a distance up to at least 16–17 km from the volcanic source. Evidence that the BT PDCs exerted a high shear-stress over the loose substratum is also provided by undulated, recumbent flame and rip-up structures at the base of some depositional units in southern and central Lipari. In order to form such bed granular instabilities between the BT and the underlying deposits we calculate that the currents had at least a shear velocity of ca. 2 m s−1 and a shear stress in the range of 1‐4.5 kPa. These results add new insights on. the large-scale hazard at the Aeolian Islands and shed new lights on the widespread transport and depositional dynamics of ash flows spreading over the sea and reaching nearby islands, and their interactions with the substratum and the pre-depositional topography.64 166 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The impact of pyroclastic density currents duration on humans: the case of the AD 79 eruption of Vesuvius
(2021-03-02); ; ; ; Pyroclastic density currents are ground hugging gas-particle flows that originate from the collapse of an eruption column or lava dome. They move away from the volcano at high speed, causing devastation. The impact is generally associated with flow dynamic pressure and temperature. Little emphasis has yet been given to flow duration, although it is emerging that the survival of people engulfed in a current strongly depends on the exposure time. The AD 79 event of Somma-Vesuvius is used here to demonstrate the impact of pyroclastic density currents on humans during an historical eruption. At Herculaneum, at the foot of the volcano, the temperature and strength of the flow were so high that survival was impossible. At Pompeii, in the distal area, we use a new model indicating that the current had low strength and low temperature, which is confirmed by the absence of signs of trauma on corpses. Under such conditions, survival should have been possible if the current lasted a few minutes or less. Instead, our calculations demonstrate a flow duration of 17 min, long enough to make lethal the breathing of ash suspended in the current. We conclude that in distal areas where the mechanical and thermal effects of a pyroclastic density currents are diminished, flow duration is the key for survival.59 36 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Total grain size distribution of components of fallout deposits and implications for magma fragmentation mechanisms: examples from Campi Flegrei caldera (Italy)
In this paper, we present results of the reconstruction of the total grain size distribution (TGSD) of the material erupted during explosive volcanic eruptions at Campi Flegrei (Italy) considering all components (juvenile, lithic and crystal clasts). To date, the few TGSDs made available have been mostly reconstructed by assuming that the tephra deposits consisted of only one component. This simplification can introduce substantial bias in the interpretation of magma fragmentation mechanisms and significantly affect ash dispersion forecasts, since each tephra component has specific aerodynamic characteristics. By means of field investigations and laboratory analyses on samples collected from deposits of the Agnano-Monte Spina and Astroni eruptions, we reconstructed the TGSDs of juvenile, lithic and crystal components via the Voronoi tessellation method. Our results show how the systematic reconstruction of a TGSD, from the component-specific to the bulk TGSD, can provide important information on magma fragmentation mechanisms and wall-rock erosion processes. Results confirm that the bulk TGSD is the combination of the merging of different component subpopulations, according to their own TGSD, density and relative mass proportions. In addition, the integration of component analysis, TGSD and settling velocity data allowed characterization of the aerodynamic behaviour of each component at variable distances from the vent, which can be related to their own parent grain size distribution. The integration of new data from distal tephra deposits for the considered eruptions has thus allowed a reassessment of the erupted volumes of eruptions considered in this research, which are now 3.17 and 0.63 km3, for Agnano-Monte Spina and Astroni, respectively.191 3 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , LA ACTIVIDAD EXPLOSIVA DEL VOLCÁN TURRIALBA (COSTA RICA) EN EL PERÍODO 2010-2016 - THE EXPLOSIVE ACTIVITY OF TURRIALBA VOLCANO (COSTA RICA) IN 2010 - 2016
The most recent eruptive activity of Turrialba volcano began on the 5th of January 2010, after more than a century of dormancy. The fragmentation process and aerodynamic behavior of the ash from Turrialba’s vulcanian eruptions were investigated by combining grain-size, petrography, mineralogy, Scanning Electron Microscopy (SEM) and Energy Dispersive System (EDS) analyses. The ash components include variable percentages of accessory fresh (no necessary juvenile) to hydrothermally altered lithics (15 - 50 % vol.) with hydrothermal minerals (≤ 12 % vol.: anhydrite, gypsum, bassanite, alunite, hexahydrite, pyrite, heulandite, native sulfur), clay minerals (8 - 17 % vol.: montmorillonite, halloysite, allophane), and a smaller quantity of fresh glassy ashes (5 - 49 % vol.) as fragments and shards (3 - 20 % vol. tackylite and 2 - 26 % vol. sideromelane), as well as primary and eroded/recycled phenocrysts (3 - 13 % vol.: 1 - 5% vol. plagioclase, 1 - 7 % vol. pyroxene, 0 - 1 % vol. olivine, 0 - 6 % vol. opaques, cristobalite and tridimite), and xenocrysts (≤ 1 % vol.: riebeckite and biotite). The secondary minerals were sourced from the deeper to surficial hydrothermal system. Textural features identified in ash particles (90 - 350 μm) suggest that they were formed by brittle fragmentation of vesicle-poor magma/water interaction; molten structures seems to be related to the ductile behavior of some fragments, probably due to the high temperature (> 600 °C) of the fumarolic/magmatic system. The percentage of juvenile components was low (1 - 2 % vol.) at the first opening eruptive phase in January 2010, and it increased steadily until the end of 2016 (ca. 12 - 25 % vol.) . The ash eruptions in the Western Crater from 2014 to 2016 were related to one and later two or three simultaneously active vents fed by distinct conduit branches. The alternation of volcanic explosions (VEI: 0 - 2), from closed conduit and the formation of new craters, to open system with phreatomagmatic events, and the repose intervals (inter-eruptive exhalative degassing), were controlled by the rate at which magma ascended and remained in the volcanic edifice. The recent tephra sequence consists of a complex succession of layers generated by contrasting fragmentation and transportation dynamics. They resulted from fully diluted, low temperature (< 300 °C), pyroclastic density currents (wet surge deposits), originated by short-lived, singlepulse, column collapse of phreatomagmatic columns, which traveled short distances (< 1000 m) from the vent area and surmounted topographic obstacles, and simultaneous fallout and ballistic ejecta. The fine material, in continuous suspension within the uppermost part of the convective plume, was dispersed into the atmosphere and finally settled down on the Valle Central. The quiescent phases could be related to a temporal cooling of the magmatic dike system or to a waning of magmatic activity at depth. Sequential fragmentation/transport theory (SFT) was used to decompose grain-size distributions into five different sub-populations. A new way of using the resultant fragmentation coefficient to assign sub-populations to different fragmentation mechanisms, even in cases when modes overlapped, is presented. For the first time the corresponding results are consistent with the phreatomagmatic eruptions, as well as with those derived from ab initio fractal model.117 89 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Hazard of pyroclastic density currents at the Campi Flegrei Caldera (Southern Italy) as deduced from the combined use of facies architecture, physical modeling and statistics of the impact parameters
(2015); ; ; ; Pyroclastic density currents of the recent eruptions at Campi Flegrei Caldera (CFC — Southern Italy) have been studiedwith the aimof assessing the potential impact of similar events in the future. Eruptions of different scales have been investigated by means of the combined use of facies architecture, laboratory analysis and physical modeling. Both in the small (Averno 2) and intermediate (Astroni) scales, facies analysis indicates that deposits result from the emplacement of pyroclastic density currents like base-surge, formed by multiple closely-timed impulses of phreatomagmatic origin. In the large-scale event (Agnano-Monte Spina), the facies architecture suggests that the currents started as concentrated flows near the vent, as originating from the collapse of a dense eruptive column, and evolved laterally into expanded flows by the propagation of the basal shear current. Laboratory analyses on samples from the main layers of deposits allowed obtaining the input data for the PYFLOW code, which was used for reconstructing the flow dynamic characteristics of the currents. The expected damage is discussed in terms of the probability density function of dynamic pressure and particle volumetric concentration. In this way, the range of potential impact that similar pyroclastic density currents could cause to buildings, infrastructures and population is defined. In the large-scale event, the dynamic pressure ranges from9.38 to 1.00 kPa (integrating the basal 10mof the current) at distances of 1.5 and 4.0 km from the vent, respectively. The values are highly influenced by the local topography. In the intermediate-scale event, the dynamic pressure ranges from 2.43 to 0.26 kPa at distances of 1.1 and 1.4 km from the vent, respectively. In the small scale event, the dynamic pressure ranges from 1.49 to 0.39 kPa at distances of 0.5 and 1.1 km from the vent, respectively. The particle volumetric concentration at a height of 2mwithin the current is always lower than 0.01, but typically it is higher than 0.001 inside the caldera, and could have severe effects on the unsheltered population, also at locations (topographic highs) where velocity and dynamic pressures are low. In distal reaches outside the caldera the widespread fine ash originated by buoyancy from the currents, whichwas transported by lower atmosphere winds, is to be considered as a “fallout load” slowly accumulating on the ground surface (and building roofs) during the waning stage of the current.84 3 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Volcanic ash hazard in the Central Mediterranean area assessed from geological data
(2014); ; ; ; Volcanic ash produced during explosive eruptions can have very severe impacts on modern technological societies. Here, we use reconstructed patterns of fine ash dispersal recorded in terrestrial and marine geological archives to assess volcanic ash hazards. The ash-dispersal maps from nine Holocene explosive eruptions of Italian volcanoes have been used to construct frequency maps of distal ash deposition over a wide area, which encompasses central and southern Italy, the Adriatic and Tyrrhenian seas and the Balkans. The maps are presented as two cumulative-thickness isopach maps, one for nine eruptions from different volcanoes and one for six eruptions from Somma-Vesuvius. These maps represent the first use of distal ash layers to construct volcanic hazard maps, and the proposed methodology is easily applicable to other volcanic areas worldwide.231 47 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Geology, volcanic history and petrology of Vulcano (central Aeolian archipelago)
(2013); ; ; ; Vulcano is an active NW–SE-elongated composite volcano located in the central Aeolian archipelago. Based on available radiometric ages and tephrochronology, the exposed volcanism started at c. 127 ka and spread through eight Eruptive Epochs separated by volcano-tectonic events and major quiescent stages. Various eruptive centres and two intersecting multi-stage calderas resulted from such evolution. Vulcano geological history displays several changes of eruption magnitude, eruption styles and composition of magmas through time. Vulcano rocks range from basalt to rhyolite and show variable alkali contents, roughly increasing during time. Magmas with low to intermediate SiO2 contents and high-K to shoshonite affinity prevail in the early Epochs 1–5 (c. 127–28 ka), whereas intermediate to high-SiO2 shoshonite and potassic alkaline products dominate the last three Epochs (<30 ka). This sharp increase in silicic products is related to the shallowing of the plumbing system and resulting major role of the differentiation processes in shallow level reservoirs. Radiogenic isotope compositions are variable (87Sr/86Sr = 0.70424–0.70587, 143Nd/144Nd = 0.51254–0.51276, 206Pb/204Pb = 19.305–19.759, 207Pb/204Pb = 15.659–15.752, 208Pb/204Pb = 39.208–39.559) as a result of both source heterogeneities and shallow-level interaction of magmas with continental crust. The compositional variations of mafic magmatism with time suggest that the source zone changed from a metasomatized, fertile, ocean island basalt- (OIB-) like mantle to a metasomatized depleted lithospheric mantle.1293 46 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The 7 September 2008 Vulcanian explosion at Stromboli volcano: Multiparametric characterization of the event and quantification of the ejecta
(2012-04); ; ; ; On 7 September 2008 a major ash explosion occurred from the SW summit crater of Stromboli volcano. This explosive event lasted ~2 min and consisted of three discrete eruptive pulses, forming an eruptive ash cloud ~500–600 m high and ~300 m wide, 11 rising with speed of 20–27 m s-1. The event was recorded by our camera and seismic networks, as well as by two electric stations installed at a 500 m mean distance from the SW crater. The electric signals recorded by the two stations during this event were 106 times greater than signals recorded during the persistent Strombolian activity, and the seismic trace had a bigger amplitude and a longer duration. Camera image analysis allowed us to infer that a partial obstruction took place at the SW crater three days before the explosive event, suggesting that a constriction within the upper conduit could have likely led to magma overpressure. Data analysis, combined with previous experimental investigations, revealed that the higher energy output of the ash explosion, when compared to the persistent Strombolian activity, resulted in a greater magma fragmentation and erupted mass. Integration of the different parameters allowed us to classify the event as a Vulcanian type, and electric signal analysis enabled retrieval of the total volume of erupted ash and of the amounts of the juvenile, phreatomagmatic, and lithic components.441 50
