Skip to main content
The search returned 17 results
Now showing 1 - 10 of 17
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Constraining Between-Event Variability of Kinematic Rupture Scenarios by Empirical Ground-Motion Model: A Case Study in Central Italy

    The region of central Italy is well known for its moderate-to-large earthquakes. Events such as 2016 Mw 6.2 Amatrice, generated in the shallow extensional tectonic regime, motivate numerical simulations to gain insights into source-related ground-motion complexities. We utilize a hybrid integral–composite kinematic rupture model by Gallovič and Brokešová (2007) to predict ground motions for other hypothetical Amatrice fault rupture scenarios (scenario events). The synthetic seismograms are computed in 1D crustal velocity models, including region-specific 1D profiles for selected stations up to 10 Hz. We create more than ten thousand rupture scenarios by varying source parameters. The resulting distributions of synthetic spectral accelerations at periods 0.2–2 s agree with the empirical nonergodic ground-motion model ofSgobbaetal.(2021)forcentral Italy in terms of the mean and total variability. However, statistical mixed-effect analysis of the residuals indicates that the between-eventvariability of the scenarios exceeds theempirical one significantly. We quan tify the role ofsourcemodelparametersinthemodelinganddemonstratethepivotalroleof theso-called stress parameterthatcontrols high-frequencyradiation. Weproposerestricting thescenariovariability tokeepthebetween-eventvariabilitywithintheempiricalvalue.The presented validation of the scenario variability can be generally utilized in scenario model ing for more realistic physics-based seismic hazard assessment.
      105  226
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Empirical Evidence of Frequency‐Dependent Directivity Effects From Small‐To‐Moderate Normal Fault Earthquakes in Central Italy

    Rupture directivity and its potential frequency dependence is an open issue within the seismological community, especially for small‐to‐moderate events. Here, we provide a statistical overview based on empirical evidence of seismological observations, thanks to the large amount of high‐quality seismic recordings (more than 30,000 waveforms) from Central Italy, which represents an excellent and almost unique natural laboratory of normal faulting earthquakes in the magnitude range between 3.4 and 6.5 within the time frame 2008–2018. In order to detect an anisotropic distribution of ground motion amplitudes due to the rupture directivity, we fit the smoothed Fourier Amplitude Spectra (FAS) cleared of source‐, site‐ and path‐effects. According to our criteria, about 36% of the analyzed events (162 out of 456) are directive and the distribution of rupture direction is aligned with the strikes of the major faults of the Central Apennines. We find that the directivity is a band‐limited phenomenon whose width may extend up to five times the corner frequency. The results of this research provide useful insights to parameterize directivity, to be explicitly implemented in future ground motion modeling and scenario predictions.
      275  107
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Accessing European Strong-Motion Data: An Update on ORFEUS Coordinated Services

    Strong ground motion records and free open access to strong‐motion data repositories are fundamental inputs to seismology, engineering seismology, soil dynamics, and earthquake engineering science and practice. This article presents the current status and outlook of the Observatories and Research Facilities for European Seismology (ORFEUS) coordinated strong‐motion seismology services, namely the rapid raw strong‐motion (RRSM) and the engineering strong‐motion (ESM) databases and associated web interfaces and webservices. We compare and discuss the role and use of these two systems using the Mw 6.5 Norcia (Central Italy) earthquake that occurred on 30 October 2016 as an example of a well‐recorded earthquake that triggered major interest in the seismological and earthquake engineering communities. The RRSM is a fully automated system for rapid dissemination of earthquake shaking information, whereas the ESM provides quality‐checked, manually processed waveforms and reviewed earthquake information. The RRSM uses only data from the European Integrated Waveform Data Archive, whereas the ESM also includes offline data from other sources, such as the ITalian ACcelerometric Archive (ITACA). Advanced software tools are also included in the ESM to allow users to process strong‐motion data and to select ground‐motion waveform sets for seismic structural analyses. The RRSM and ESM are complementary services designed for a variety of possible stakeholders, ranging from scientists to the educated general public. The RRSM and ESM are developed, organized, and reviewed by selected members of the seismological community in Europe, including strong‐motion data providers and expert users. Global access and usage of the data is encouraged. The ESM is presently the reference database for harmonized seismic hazard and risk studies in Europe. ORFEUS strong‐motion data are open, “Findable, Accessible, Interoperable, and Reusable,” and accompanied by licensing information. The users are encouraged to properly cite the data providers, using the digital object identifiers of the seismic networks.
      749  262
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Fling Effects from Near‐Source Strong‐Motion Records: Insights from the 2016 M w 6.5 Norcia, Central Italy, Earthquake

    We propose a semiautomatic processing scheme (extended BASeline Correction [eBASCO]) for recovering the tectonic fling from near‐source records. The method, based on a piecewise linear detrend of the strong‐motion (SM) recordings, is applied to reconstruct the ground displacement field of the 30 October 2016 Mw 6.5 earthquake in central Italy. The robustness of the results is checked against geodetic measurements, remote sensing data, ground‐motion simulations, and existing empirical models for fling amplitude. The outcomes of eBASCO are analyzed with the goal of testing its capability to preserve long‐period content in near‐source SM recordings affected by tectonic fling, different from standard processing schemes based on bandpass filtering. Comparison of peak ground displacements, peak ground velocities, and spectral displacements shows that long‐period ground motion recorded over and in proximity of the fault can be underestimated by standard processing. Spectral displacement ordinates can diverge up to the 25% for periods longer than 5 s when an appropriate baseline correction is made.
      1219  119
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Fault Segmentation as Constraint to the Occurrence of the Main Shocks of the 2016 Central Italy Seismic Sequence

    We perform the finite-extent fault inversion of the three main events of the 2016 Central Italy seismic sequence using near-source strong motion records. We demonstrate that both earthquake nucleation and rupture propagation were controlled by segmentation of the (N)NW-(S)SE trending Quaternary normal faults. The first shock of the sequence (24 August, Mw 6.0) ruptured at the relay zone between the Laga Mts (LF) and the Cordone del Vettore (CVF) normal faults. The second shock (26 October, Mw 5.9) nucleated at a minor relay zone within the Mt. Vettore-Mt. Bove fault (VBF), while the third and largest one (30 October, Mw 6.5) initiated at the relay zone between the VBF and CVF, triggering the multiple rupture of the VBF, CVF, and probably LF. We show that this latter relay zone corresponds to the deeper, high-angle, fault zone of the Sibillini Mts cross structure, a thrust-ramp inherited from the Miocene-Pliocene contractional phase of the Apennines. This structure acted as a barrier to rupture propagation of the first two events thus defining an area of large stress concentration until it acted as the initiator of the rupture originating the largest Mw 6.5 event that crossed the barrier itself. We suggest that the “young” CVF have started to cut through the barrier acting as a soft-linkage between the two long-lived LF and VBF. The evidence that coseismic cumulative slip shows a maximum at the CVF, provided by both slip inversion and original surface rupture data, suggests that the CVF is growing faster than the adjacent faults.
      243  89
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Diminishing high-frequency directivity due to a source effect: Empirical evidence from small earthquakes in the Abruzzo region, Italy

    The aim of this study is to investigate the directivity effects of ~250 aftershocks (magnitudes 3–5.5) of the Mw 6.1 2009 L’Aquila earthquake (central Italy). To this end, we estimate the apparent source spectra at each station removing path and site effects inferred by standard Generalized Inversion Technique. Then, we evaluate the residuals between the apparent source spectra and the event mean source spectrum at selected frequencies. We investigate azimuthal and frequency dependence of the residuals for 40 events with the best station coverage. For most of events with the strongest directivity effect (Mw 3.4–4.0), we observe a remarkable decrease of the directivity amplification at high frequencies, which has not yet been documented for such relatively small-magnitude events. Since there is negligible distance dependence, we ascribe this observation to a source phenomenon such as significant small-scale rupture propagation complexity.
      97  128
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Complexity of theMw6.3 2009 L’Aquila (central Italy) earthquake: 2. Broadband strong motion modeling

    (2012-04-21) ; ; ;
    Ameri, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
    ;
    Gallovic, F.; Charles University, Prague
    Near-fault strong-ground motions (0.1–10 Hz) recorded during the Mw 6.3 2009 L’Aquila earthquake exhibit great spatial variability. Modeling the observed seismograms allows linking distinct features of the observed wavefield to particular source and propagation effects and provides insights on strong motion complexity from this moderate magnitude event. We utilize a hybrid integral-composite approach based on a k-square kinematic rupture model, combining low-frequency coherent and high-frequency incoherent source radiation and providing omega-squared source spectral decay. Several source model features, proven to be stable by means of an uncertainty analysis in the preceding low-frequency (<0.2 Hz) multiple finite-extent source inversion (Paper 1), were constrained. Synthetic Green’s functions are calculated in a 1D-layered crustal model including 1D soil profiles to account for site-specific response (where available). The results show that although the local site effects improve the modeling, the spatial broadband ground-motion variability is to large extent controlled by the rupture kinematics. The modeling thus confirms and further constraints the source model features, including the position and slip amount of the two main asperities, the largest asperity time delay and the rupture velocity distribution on the fault. Furthermore, we demonstrate that the crossover frequency dividing the coherent and incoherent wavefield, often considered independent on the station position, has to be variable in order to adequately reproduce both near and far station recordings. This suggests that the incoherency of the radiated wavefield is controlled by the wave-propagation phenomena and/or the initial updip rupture propagation was very smooth (coherent) up to relatively high frequencies (>2 Hz)
      179  27
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Building damage scenarios based on exploitation of Housner intensity derived from finite faults ground motion simulations

    In this paper earthquake damage scenarios for residential buildings (about 4200 units) in Potenza (Southern Italy) have been estimated adopting a novel probabilistic approach that involves complex source models, site effects, building vulnerability assessment and damage estimation through Damage Probability Matrices. Several causative faults of single seismic events, with magnitude up to 7, are known to be close to the town. A seismic hazard approach based on finite faults ground motion simulation techniques has been used to identify the sources producing the maximum expected ground motion at Potenza and to generate a set of ground motion time histories to be adopted for building damage scenarios. Additionally, site effects, evaluated in a previouswork through amplification factors of Housner intensity, have been combined with the bedrock values provided by hazard assessment. Furthermore, a new relationship between Housner and EMS-98 macroseismic intensity has been developed. This relationship has been used to convert the probability mass functions of Housner intensity obtained from synthetic seismograms amplified by the site effects coefficients into probability mass function of EMS-98 intensity. Finally, the Damage Probability Matrices have been applied to estimate the damage levels of the residential buildings located in the urban area of Potenza. The proposed methodology returns the full probabilistic distribution of expected damage, thus avoiding average damage index or uncertainties expressed in term of dispersion indexes.
      245  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ground‐Motion Simulations for the M 6.9 Irpinia 1980 Earthquake (Southern Italy) and Scenario Events

    (2011-06-01) ; ; ; ;
    Ameri, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
    In this paper, we adopt three ground‐motion simulation techniques (EXSIM, Motazedian and Atkinson, 2005, DSM, Pacor et al., 2005 and HIC, Gallovič and Brokešová, 2007), with the aim of investigating the different performances in near‐fault strong‐motion modeling and prediction from past and future events. The test case is the 1980, M 6.9, Irpinia earthquake, the strongest event recorded in Italy. First, we simulate the recorded strong‐motion data and validate the model parameters by computing spectral acceleration and peak amplitudes residual distributions. The validated model is then used to investigate the influence of site effects and to compute synthetic ground motions around the fault. Afterward, we simulate the expected ground motions from scenario events on the Irpinia fault, varying the hypocenters, the rupture velocities and the slip distributions. We compare the median ground motions and related standard deviations from all scenario events with empirical ground motion prediction equations (GMPEs). The synthetic median values are included in the median ± one standard deviation of the considered GMPEs. Synthetic peak ground accelerations show median values smaller and with a faster decay with distance than the empirical ones. The synthetics total standard deviation is of the same order or smaller than the empirical one and it shows considerable differences from one simulation technique to another. We decomposed the total standard deviation into its between‐scenario and within‐scenario components. The larger contribution to the total sigma comes from the latter while the former is found to be smaller and in good agreement with empirical inter‐event variability.
      116  370
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Uncertainties in Strong Ground-Motion Prediction with Finite-Fault Synthetic Seismograms: An Application to the 1984 M 5.7 Gubbio, Central Italy, Earthquake

    (2009-04) ; ; ; ;
    Ameri, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
    This study investigates the engineering applicability of two conceptually different finite-fault simulation techniques. We focus our attention on two important aspects: first to quantify the capability of the methods to reproduce the observed ground-motion parameters (peaks and integral quantities); second to quantify the dependence of the strong-motion parameters on the variability in the large-scale kinematic definition of the source (i.e., position of the nucleation point, value of the rupture velocity, and distribution of the final slip on the fault). We applied an approximated simulation technique, the deterministic-stochastic method and a broadband technique, the hybrid-integral-composite method, to model the 1984 Mw 5.7 Gubbio, central Italy, earthquake, at five accelerometric stations. We first optimize the position of the nucleation point and the value of the rupture velocity for three different final slip distributions on the fault by minimizing an error function in terms of acceleration response spectra in the frequency band from 1 to 9 Hz. We found that the best model is given by a rupture propagating at about 2:65 km=sec from a hypocenter located approximately at the center of the fault. In the second part of the article we calculate more than 2400 scenarios varying the kinematic source parameters. At the five sites we compute the residuals distributions for the various strongmotion parameters and show that their standard deviations depend on the source parameterization adopted by the two techniques. Furthermore, we show that Arias Intensity (AI) and significant duration are characterized by the largest and smallest standard deviation, respectively. Housner Intensity is better modeled and less affected by uncertainties in the source kinematic parameters than AI. The fact that the uncertainties in the kinematic model affects the variability of different ground-motion parameters in different ways has to be taken into account when performing hazard assessment and earthquake engineering studies for future events.
      121  21