Skip to main content
The search returned 14 results
Now showing 1 - 10 of 14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Application of artificial intelligence techniques in seismology and engineering seismology

    In the field of risk evaluation and seismic hazard assessment, it is necessary to codify a great quantity of aspects of the so called knowledge and to supply an intelligent support for the not-well-defined problems (data uncertainty, lack of rigorous solution algorithms). The main feature of an expert system is to emulate effectively the behaviour of a human expert in a particular and defined field, enabling the final user to improve its decisional process and giving access to him to a knowledge base otherwise not clearly codified. From these general considerations the intention came to develop the prototype CZAR (Classificatore Zone A Rischio) that is an expert system reproducing the Italian seismic classification based on the definition of Seismic Hazard given by Progetto Finalizzato Geodinamica (PFG) of the Consiglio Nazionale delle Ricerche (CNR). The expert system built up on the commercial shell Nexpert Object is working on a personal computer through a graphic interface developed with the Graphical User Interface (GUI) of Window 3.0. This user friendly interface makes possible the choice of different procedures to estimate the hazard parameters and also allows the activation of the classification inferential process. The influence of different assumptions and strategies has been evaluated by a mathematical algorithm suggested by the general structure of the Bayes’ theorem. In this paper the prototype of the expert system has been applied to the data relating to Toscana region (central Italy) and the interactive evaluation of the maps furnishes a relative measure for discrepancies on seismic classification in the 2nd seismic category.
      89  68
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Testing the value of a multi-scale gravimetric analysis in characterizing active fault 2 geometry at hypocentral depths: the 2016-2017 Central Italy seismic sequence

    We report the results of a multidisciplinary investigation performed across the normal Quaternary faults that ruptured the surface during the August 24 (Mw 6.0) and October 30 (Mw 6.5), 2016 strong earthquakes in the Mt. Vettore-Mt. Bove areas, central Italy. Our aim is to test the effectiveness of the contribution of a multi-scale gravimetric analysis in characterizing seismogenic faults’ geometry at hypocentral depths on well-known outcropping faulty systems with known earthquake distribution. We adopted a multi-scale geophysical/geological approach consisting in the comparison of gravity lineaments inferred by Multiscale Derivative Analysis with the Quaternary structural setting mapped in the study area, the primary coseismic surface ruptures of the 2016-2017 sequence and the earthquakes’ epicentral distribution. Moreover, we performed a combined interpretation of 2D hypocentral sections of the 2016-2017 seismic sequences with images resulting from the Depth from Extreme Points method, to infer the faults’ geometry at depth. Based on our results, the investigated NW-SE Mt. Vettore-Mt. Bove fault system is dipping 60°-70° westward. We also detected the splays of this primary fault and its blind antithetic NW-SE structure, dipping northeastward. In the Norcia basin we highlight two main faults bordering the basin with a dip of about 45°. The one edging the eastern side dips westward, whereas the fault edging the western side dips eastward. Thanks to our analysis we could identify and characterize the geometry of the Norcia and Vettore master faults, as well as other blind/buried and/or silent faults that are related to the 2016 seismogenic structure. Our results show the effectiveness of this approach in potentially high-hazard areas that are structurally poorly known.
      328  245
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Basement Mapping of the Fucino Basin in Central Italy by ITRESC Modeling of Gravity Data

    Sediments infilling in intermontane basins in areas with high seismic activity can strongly affect ground-shaking phenomena at the surface. Estimates of thickness and density dis- tribution within these basin infills are crucial for ground motion amplification analysis, especially where demographic growth in human settlements has implied increasing seismic risk. We em- ployed a 3D gravity modeling technique (ITerative RESCaling—ITRESC) to investigate the Fucino Basin (Apennines, central Italy), a half-graben basin in which intense seismic activity has recently occurred. For the first time in this region, a 3D model of the Meso-Cenozoic carbonate basement morphology was retrieved through the inversion of gravity data. Taking advantage of the ITRESC technique, (1) we were able to (1) perform an integration of geophysical and geological data con- straints and (2) determine a density contrast function through a data-driven process. Thus, we avoided assuming a priori information. Finally, we provided a model that honored the gravity anomalies field by integrating many different kinds of depth constraints. Our results confirmed evidence from previous studies concerning the overall shape of the basin; however, we also high- lighted several local discrepancies, such as: (a) the position of several fault lines, (b) the position of the main depocenter, and (c) the isopach map. We also pointed out the existence of a new, un- known fault, and of new features concerning known faults. All of these elements provided useful contributions to the study of the tectono-sedimentary evolution of the basin, as well as key infor- mation for assessing the local site-response effects, in terms of seismic hazards.
      125  96
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A multidisciplinary approach to characterize the geometry of active faults: the example of Mt. Massico, Southern Italy

    We present the results of a multidisciplinary and multiscale study at Mt. Massico, Southern Italy. Mt. Massico is a carbonate horst located along the Campanian-Latial margin of the Tyrrhenian basin, bordered by two main NE–SW systems of faults, and by NW–SE and N–S trending faults. Our analysis deals with the modelling of the main NE– SW faults. These faults were capable during Plio-Pleistocene and are still active today, even though with scarce and low-energy seismicity (Mw maximum = 4.8).We inferred the pattern of the fault planes through a combined interpretation of 2-D hypocentral sections, a multiscale analysis of gravity field and geochemical data. This allowed us to characterize the geometry of these faults and infer their large depth extent. This region shows very striking gravimetric signatures, well-known Quaternary faults, moderate seismicity and a localized geothermal fluid rise. Thus, this analysis represents a valid case study for testing the effectiveness of a multidisciplinary approach, and employing it in areas with buried and/or silent faults of potential high hazard, such as in the Apennine chain.
      241  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Gravity modeling finds a large magma body in the deep crust below the Gulf of Naples, Italy

    We analyze a wide gravity low in the Campania Active Volcanic Area and interpret it by a large and deep source distribution of partially molten, low-density material from about 8 to 30 km depth. Given the complex spatial-temporal distribution of explosive volcanism in the area, we model the gravity data consistently with several volcanological and petrological constraints. We propose two possible models: one accounts for the coexistence, within the lower/intermediate crust, of large amounts of melts and cumulates besides country rocks. It implies a layered distribution of densities and, thus, a variation with depth of percentages of silicate liquids, cumulates and country rocks. The other reflects a fractal density distribution, based on the scaling exponent estimated from the gravity data. According to this model, the gravity low would be related to a distribution of melt pockets within solid rocks. Both density distributions account for the available volcanological and seismic constraints and can be considered as end-members of possible models compatible with gravity data. Such results agree with the general views about the roots of large areas of ignimbritic volcanism worldwide. Given the prolonged history of magmatism in the Campania area since Pliocene times, we interpret the detected low-density body as a developing batholith.
      89  94
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Multiparametric data analysis for seismic source identification in the Campanian area: merging of seismological, structural and gravimetric data

    This paper deals with an interdisciplinary research that has been carried out to investigate the neotectonic activity of the Campanian plain and surrounding areas (southern Italy), affected by Plio-Pleistocene tectonics and volcanic activity. Three thematic data sets have been generated for this area, “fault”, “earthquake” and “gravimetric” data sets, respectively. These data sets allow an integrated analysis of the structural, seismic and gravimetric data in GIS environment with the aim of identifying the active structural lineaments that accommodate the local stress through seismic activity. In detail, an original map with Plio-Quaternary tectonic structures of the Campanian plain and its margins, constrained by morpho-structural analysis and/or geophysical exploration data, is presented. The available earthquake data sets have been merged in a single data set, including seismicity in the Campanian area from 217 b.C. to 2010; processing of seismic data for new precise earthquake locations have been carried out for some clusters of events with poor data, for better constraining existence and activity of some outcropping and buried tectonic structures. As regards the gravimetric data set, a Multiscale Derivative Analysis (MDA) of the gravity field of the area has been performed, relying on the high resolution properties of the Enhanced Horizontal Derivative (EHD). MDA of gravity data allowed localization of several linear and close trends, identifying anomaly sources whose presence was not previously detected. Our integrated analysis shows that a strong correlation occurs among the new hypocentral locations of the seismic clusters matching the fault systems of the Massico Mt. and Avella Mts., and the MDA lineaments from gravity data relative to the same tectonic structures.
      397  56
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Analysis of the San Giuliano di Puglia (Southern Italy) active faults: an integrated approach

    (Rendiconti della Società Geologica Italiana, 2016-09-07) ; ; ; ;
    The area of San Giuliano di Puglia (Southern Italy) was struck by a moderate earthquake of Mw=5.7 on October 31st, 2002. The aim of this study is to identify and better constrain the geometry of the seismogenic structures (active, outcropping and buried faults) in the area. We used an integrated analysis of geo-structural, seismic and gravimetric data. We built three thematic databases: “faults”, “earthquakes” and “gravimetric" data: 1. The fault database consists of data extracted from the available structural and geological maps: ITHACA (ITaly HAzard from CApable faults) catalogue; DISS (Database of Individual Seismogenetic Sources) database; the "Neotectonic Map of Italy" 1:500.000; the Geological Map 1:100.000, Sheets 154, 155, 162, 163; several geological studies. 2. The earthquakes database was created by merging the data from historical and instrumental Catalogues (CPTI11; ISIDE-INGV). 3. The gravimetric database was created through the Multiscale Derivative Analysis (MDA) of the Bouguer anomaly map of the area, whose maxima show the presence of density lineaments. The integration of these datasets in GIS environment, identified three possible cases of correlation between faults, earthquakes and MDA maxima: ⦁ A clear correlation between epicentral location, fault positions and MDA maxima shows the existence of active faults; ⦁ A good correlation between MDA maxima and epicentral positions, without correspondence with faults known from geological data, can suggest the presence of buried active faults; ⦁ A good correlation between faults from geological datasets and literature and MDA maxima, without correlation with earthquakes, can indicate the existence of inactive or silent faults. Previous studies show that the main shock in the area of San Giuliano di Puglia was generated by a deep and subvertical strike-slip structure E-W trending, with a right lateral focal mechanism (Galli & Molin, 2004). Nevertheless, Vezzani et al. (2009) proposed a reverse fault mechanism. Valensise et al. (2004) suggested that the 2002 events could be related to the Mattinata fault, a major active right lateral strike-slip fault cutting across the Gargano promontory, In order to better constrain the structural framework of this area, we combined faults seismic data and a multiscale approach of gravity data in GIS environment.
      119  120
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    An application on Geographic Information Systems connected to Expert System

    (European Center for Geodynamics and Seismology (ECGS), 1995) ; ; ; ;
    The studies urban areas directed at the definition of seismic risk, raise the problem of the seismic vulnerability assessment of construction properties that require the estimation of the tendency to damage of a plurality of buildings. Very often one comes upon buildings that have been constructed in former epochs without the use of seismic codes and generally built in masonry. The leads to the search for procedures for vulnerability assessment, based on the rapid acquisition of information on existing buildings, which must furnish a sufficiently reliable assessment of the seismic damageability, generally without the possibility to refer to very sophisticated models. In previous works, assessments of seismic vulnerability have been effected using surveys transferred on National Project for Seismic Prevention (GNDT) sheets (Zonno and Ducarme, eds, 1992). These works have been realized using capes systems in order to treat with the uncertainty of the data. However, the analyses that only refer to GNDT sheets, are limited to single buildings, ideationally understood as isolated. An alternative and maybe complementary attempt is to assess the vulnerability of buildings in a global structural context using Geographic Information Systems to mapping the urban system, integrated with the surveys transferred on COOT sheets. The main characteristics of the building and the structural context, indices of a major or minor damageability, have been individuated, but it is difficult to define a rapid procedure for the assessment of seismic vulnerability. The idea was to use an expert system to codify a basis of the presently acquired knowledge and to apply it automatically on the basis of the results obtained by processes of space analyses calculated by GIS. On the basis of the data obtained with GNDT sheets, the vulnerability of the building can be assessed independently from the structural context (intrinsic vulnerability). The availability of data on the space distribution of the adjoining buildings permits an assessment on the effective vulnerability that takes into account the influence of the structural context. With relation to other works effected on the argument, the proposed system automatically assesses a large quantity of geocoded data either in geometry and in the structure of the components. In particular, in this work the seismic vulnerability assessment of the buildings is effected through the Geographic Information Systems PC Arc-Info connected with the Expert System Shell Nexpert Object, starting from the methods used by the GNDT of the National Council for Research (CNR) (Benedetti and Petrini, 1984; Baldi and Corsanego, 1987) and integrating the effects of anisotropics of the structural behaviour and context (Grimaz, 1992-93).
      75  169
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A review of the gravity and magnetic studies in the Tyrrhenian Basin and its volcanic districts

    Since the Sixties, the turning point marked by the Plate Tectonics global theory has provided new ideas for the interpretation of the complex geodynamic evolution of the Mediterranean area. The renewed interest that followed gave a strong impulse to the geological and geophysical investigations of the Mediterranean area and, more specifically, of the Tyrrhenian Basin. Therefore, large scale geophysical surveys and oceanographic cruises were carried out until the end of the Eighties to fill the gap of geophysical information existing in the area until then. Afterwards, short scale surveys were prevalent to improve the detail of the information in areas of geodynamic interest. The gathered data sets allowed new models to be formulated, improving the knowledge of the crustal and lithospheric structure of the Tyrrhenian Basin (and surrounding areas) and the reconstruction of its complex geodynamic evolution. In this frame, the contribution of gravity and magnetic investigations has been unquestionable and deserves a wide-ranging review both on large and small scale. The main features of the potential fields resulting from these surveys will be described and the interpretative models suggested by several authors will be summarized.
      329  799
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Parameters estimation of intensity decay relationships

    (1996-10) ; ; ;
    Cella, F.; Istituto di Ricerca sul Rischio Sismico, C.N.R., Milano, Italy
    ;
    Zonno, G.; Istituto di Ricerca sul Rischio Sismico, C.N.R., Milano, Italy
    This paper presents a methodology that analyses a set of observed intensities and estimates the parameters of an adopted attenuation law directly using the data points. A procedure was developed to define and evaluate the equivalent radii Di of the isoseismal lines. From these data it is possible to derive the parameters of the attenuation law. Moreover a validation procedure was developed to measure the capability of intensity decay relationships to reproduce the observed intensities. A case study of 55 earthquakes, divided into 9 subsets, of similar-attenuation zones, was analysed, using, as attenuation law, the one proposed by Grandori (1987, l991) to estimate either the parameters for each single earthquake or the parameters of an average intensity decay relationship for the similar-attenuation zones. The calculated intensity decay relationships result in 60- 70% of correctly reproduced points for most intensity data maps analysed. Analysing the similar-attenuation zones and different earthquakes simultaneously, the parameters of attenuation laws obtain results with a lower percentage of correctly reproduced points. The proposed methodology seems to be effective and suitable to reach practical results in parameters estimation of intensity decay relationships.
      171  581