Biass, Sebastien
10 results
Filters
Settings
The search returned 10 results
Now showing 1 - 10 of 10
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , New Insights Into the Relationship Between Mass Eruption Rate and Volcanic Column Height Based On the IVESPA Data Set
Rapid and simple estimation of the mass eruption rate (MER) from column height is essential for real-time volcanic hazard management and reconstruction of past explosive eruptions. Using 134 eruptive events from the new Independent Volcanic Eruption Source Parameter Archive (IVESPA, v1.0), we explore empirical MER-height relationships for four measures of column height: spreading level, sulfur dioxide height, and top height from direct observations and as reconstructed from deposits. These relationships show significant differences and highlight limitations of empirical models currently used in operational and research applications. The roles of atmospheric stratification, wind, and humidity remain challenging to detect across the wide range of eruptive conditions spanned in IVESPA, ultimately resulting in empirical relationships outperforming analytical models that account for atmospheric conditions. This finding highlights challenges in constraining the MER-height relation using heterogeneous observations and empirical models, which reinforces the need for improved eruption source parameter data sets and physics-based models.83 42 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Integrating hazard, exposure, vulnerability and resilience for risk and emergency management in a volcanic context: the ADVISE model
Risk assessments in volcanic contexts are complicated by the multi-hazard nature of both unrest and eruption phases, which frequently occur over a wide range of spatial and temporal scales. As an attempt to capture the multi-dimensional and dynamic nature of volcanic risk, we developed an integrAteD VolcanIc risk asSEssment (ADVISE) model that focuses on two temporal dimensions that authorities have to address in a volcanic context: short-term emergency management and long-term risk management. The output of risk assessment in the ADVISE model is expressed in terms of potential physical, functional, and systemic damage, determined by combining the available information on hazard, exposed systems and vulnerability. The ADVISE model permits qualitative, semi-quantitative and quantitative risk assessment depending on the final objective and on the available information. The proposed approach has evolved over a decade of study on the volcanic island of Vulcano (Italy), where recent signs of unrest combined with uncontrolled urban development and significant seasonal variations of exposed population result in highly dynamic volcanic risk. For the sake of illustration of all the steps of the ADVISE model, we focus here on the risk assessment of the transport system in relation to the tephra fallout associated with a long-lasting Vulcanian cycle.64 201 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Lahar risk assessment from source identification to potential impact analysis: the case of Vulcano Island, Italy
Lahars are rapid flows composed of water and volcaniclastic sediments, which have the potential to impact residential buildings and critical infrastructure as well as to disrupt critical services, especially in the absence of hazard-based land-use planning. Their destructive power is mostly associated with their velocity (related to internal flow properties and topographic interactions) and to their ability to bury buildings and structures (due to deposit thickness). The distance reached by lahars depends on their volume, on sediments/water ratio, as well as on the geometrical properties of the topography where they propagate. Here we present the assessment of risk associated with lahar using Vulcano island (Italy) as a case study. First, we estimated an initial lahar source volume considering the remobilisation by intense rain events of the tephra fallout on the slopes of the La Fossa cone (the active system on the island), where the tephra fallout is associated with the most likely scenario (e.g. long-lasting Vulcanian cycle). Second, we modelled and identified the potential syn-eruptive lahar impact areas on the northern sector of Vulcano, where residential and touristic facilities are located. We tested a range of parameters (e.g., entrainment capability, consolidation of tephra fallout deposit, friction angle) that can influence lahar propagation output both in terms of intensity of the event and extent of the inundation area. Finally, exposure and vulnerability surveys were carried out in order to compile exposure and risk maps for lahar-flow front velocity (semi-quantitative indicator-based risk assessment) and final lahar-deposit thickness (qualitative exposure-based risk assessment). Main outcomes show that the syn-eruptive lahar scenario with medium entrainment capability produces the highest impact associated with building burial by the final lahar deposit. Nonetheless, the syn-eruptive lahar scenario with low entrainment capacity is associated with higher runout and results in the highest impact associated with lahar-flow velocities. Based on our simulations, two critical infrastructures (telecommunication and power plant), as well as the main road crossing the island are exposed to potential lahar impacts (either due to lahar-flow velocity or lahar-deposit thickness or both). These results show that a risk-based spatial planning of the island could represent a valuable strategy to reduce the volcanic risk in the long term.44 77 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The Independent Volcanic Eruption Source Parameter Archive (IVESPA, version 1.0): A new observational database to support explosive eruptive column model validation and development
Eruptive columnmodels are powerful tools for investigating the transport of volcanic gas and ash, reconstructing past explosive eruptions, and simulating future hazards. However, the evaluation of these models is challenging as it requires independent estimates of themainmodel inputs (e.g.mass eruption rate) and outputs (e.g. column height). There exists no database of independently estimated eruption source parameters (ESPs) that is extensive, standardized, maintained, and consensus-based. This paper introduces the Independent Volcanic Eruption Source Parameter Archive (IVESPA, ivespa.co.uk), a community effort endorsed by the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Commission on Tephra HazardModelling.We compiled data for 134 explosive eruptive events, spanning the 1902-2016 period, with independent estimates of: i) total erupted mass of fall deposits; ii) duration; iii) eruption column height; and iv) atmospheric conditions. Crucially, we distinguish plume top versus umbrella spreading height, and the height of ash versus sulphur dioxide injection. All parameter values provided have been vetted independently by at least two experts. Uncertainties are quantified systematically, including flags to describe the degree of interpretation of the literature required for each estimate. IVESPA also includes a range of additional parameters such as total grain size distribution, eruption style, morphology of the plume (weak versus strong), and mass contribution from pyroclastic density currents, where available. We discuss the future developments and potential applications of IVESPA and make recommendations for reporting ESPs to maximize their usability across different applications. IVESPA covers an unprecedented range of ESPs and can therefore be used to evaluate and develop eruptive column models across a wide range of conditions using a standardized dataset.215 154 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Mapping the susceptibility of rain-triggered lahars at Vulcano island (Italy) combining field characterization, geotechnical analysis, and numerical modelling
the characterization of triggering dynamics and remobilized volumes is crucial to the assessment of associated lahar hazards. We propose an innovative treatment of the cascading effect between tephra fallout and lahar hazards based on probabilistic modelling that also accounts for a detailed description of source sediments. As an example, we have estimated the volumes of tephra fallout deposit that could be remobilized by rainfall-triggered lahars in association with two eruptive scenarios that have characterized the activity of the La Fossa cone (Vulcano, Italy) in the last 1000 years: a long-lasting Vulcanian cycle and a subplinian eruption. The spatial distribution and volume of deposits that could potentially trigger lahars were analysed based on a combination of tephra fallout probabilistic modelling (with TEPHRA2), slope-stability modelling (with TRIGRS), field observations, and geotechnical tests. Model input data were obtained from both geotechnical tests and field measurements (e.g. hydraulic conductivity, friction angle, cohesion, total unit weight of the soil, and saturated and residual water content). TRIGRS simulations show how shallow landsliding is an effective process for eroding pyroclastic deposits on Vulcano. Nonetheless, the remobilized volumes and the deposit thickness threshold for lahar initiation strongly depend on slope angle, rainfall intensity, grain size, friction angle, hydraulic conductivity, and the cohesion of the source deposit.39 68 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Quantifying risk to agriculture from volcanic ashfall: a case study from the Bay of Plenty, New Zealand
Quantitatively assessing long-term volcanic risk can be challenging due to the many variables associated with volcanic hazard and vulnerability. This study presents a structured first-order approach for considering variables in hazard and vulnerability anal- yses, such as eruption style and cyclic fragility, in order to quantitatively estimate risk. Probabilistic volcanic hazard data derived from advection–diffusion–sedimentation tephra fall model TEPHRA2 and probabilistic volcanic hazard analysis tool BET_VH (Bayesian Event Tree for Volcanic Hazards) are combined with fragility functions and seasonal vulnerability coefficients for agricultural production to calculate volcanic risk indices which represent the likelihood of damage or loss to farm production over a given time frame. The resulting dataset allows for approximations of quantitative risk over a con- tinuous range of ash thickness thresholds, at multiple levels of uncertainty, and in the context of fluctuating hazard and vulnerability environments (e.g., seasonal wind patterns and crop phases). We illustrate this approach through a case study which evaluates the risk of incurring 90% damage to agricultural production at dairy and fruit farms in the Bay of Plenty region of New Zealand (BoP) due to ashfall from a Plinian eruption phase at the large local caldera volcano, the Okataina Volcanic Centre (OVC). Consideration of sea- sonal wind profiles, seasonal fluctuations in fruit and dairy farm vulnerability, multiple possible OVC eruption styles, different possible OVC vent locations, and a continuous distribution of ash thickness and damage thresholds enables a multi-dimensional analysis that aims to reflect the natural complexity and interdependencies associated with volcanic risk. A risk uncertainty matrix is introduced as a conceptual scheme to help guide eval- uation and communication of the results of such quantitative risk analyses by showing how different types of uncertainty can yield ‘‘maximum’’, ‘‘average’’, or ‘‘minimum’’ estimates of risk. Results of this case study indicate that BoP fruit farms are at higher risk of experiencing damage and production loss from OVC ashfall than dairy farms, and farms to the east of the OVC are typically at higher risk than farms to the north of the OVC. Forecasts based on the annual maximum estimate of risk for fruit farms show a regional average of 2.3% probability (greater than 1 in 50 likelihood) of experiencing 90% damage from a basaltic or rhyolitic Plinian eruption from anywhere within the OVC over a period of 100 years. Seasonal-level analyses revealed that the risk of experiencing losses due to OVC ashfall at fruit farms is cyclic and fluctuates with time of year and harvest season, with the highest risk experienced during peak harvest season (15 October–14 April) when crop vulnerability is high and westerly winds dominate in the BoP.224 2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , MeMoVolc report on classification and dynamics of volcanic explosive eruptions
(2016-10-28); ; ; ; Classifications of volcanic eruptions were first introduced in the early twentieth century mostly based on qualitative observations of eruptive activity, and over time, they have gradually been developed to incorporate more quantitative descriptions of the eruptive products from both deposits and observations of active volcanoes. Progress in physical volcanology, and increased capability in monitoring, measuring and modelling of explosive eruptions, has highlighted shortcomings in the way we classify eruptions and triggered a debate around the need for eruption classification and the advantages and disadvantages of existing classification schemes. Here, we (i) review and assess existing classification schemes, focussing on subaerial eruptions; (ii) summarize the fundamental processes that drive and parameters that characterize explosive volcanism; (iii) identify and prioritize the main research that will improve the understanding, characterization and classification of volcanic eruptions and (iv) provide a roadmap for producing a rational and comprehensive classification scheme. In particular, classification schemes need to be objective-driven and simple enough to permit scientific exchange and promote transfer of knowledge beyond the scientific community. Schemes should be comprehensive and encompass a variety of products, eruptive styles and processes, including for example, lava flows, pyroclastic density currents, gas emissions and cinder cone or caldera formation. Open questions, processes and parameters that need to be addressed and better characterized in order to develop more comprehensive classification schemes and to advance our understanding of volcanic eruptions include conduit processes and dynamics, abrupt transitions in eruption regime, unsteadiness, eruption energy and energy balance.374 11 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Exploring the influence of vent location and eruption style on tephra fall hazard from the Okataina Volcanic Centre, New Zealand
(2015-03-26); ; ; ; Uncertainties in modelling volcanic hazards are often amplified in geographically large systems and in volcanoes which have a diverse eruption history that comprises variable eruption compositions and styles from different vent locations. The large ~ 700 km2 Okataina Volcanic Centre (OVC) is a large silicic caldera complex in a geodynamic region of New Zealand which has displayed a range of eruption styles and compositions over its current phase of activity (26 ka - present), including one basaltic maar-forming eruption, one basaltic Plinian eruption, and nine rhyolitic Plinian eruptions. All three of these eruption styles have occurred within the past 3.5 ky, and any of these styles could occur in the event of a future eruption. The location of a future eruption is also unknown. Future vents could potentially open in one of three different possible areas of the OVC: the Tarawera linear vent zone (LVZ) (5 eruptions over the past 26 ky), the Haroharo LVZ (5 eruptions over the past 26 ky), or outside of these LVZs (1 eruption over the past 26 ky). A future rhyolitic or basaltic Plinian eruption from the OVC is likely to generate widespread tephra fall in loads that will cause significant disruption and socio- economic impacts throughout the surrounding region. Past OVC tephra studies have focused on evaluating hazard from a rhyolitic Plinian eruption at select vent locations in the OVC's Tarawera LVZ. Here, we expand upon these past studies by evaluating tephra hazard for all possible OVC eruption vent areas and for both rhyolitic and basaltic Plinian eruption styles, and exploring how these parameters influence tephra hazard forecasts. Probabilistic volcanic hazard model BET_VH and advection-diffusion tephra hazard model TEPHRA2 were used to assess the hazard of accumulating ≥ 10 kg m-2 of tephra from both basaltic Plinian and rhyolitic Plinian eruption styles, occurring from within the Tarawera LVZ, the Haroharo LVZ, and other potential vent areas within the caldera. We present the results of these analyses as a first-order tephra hazard assessment for the entire OVC. Our results highlight the importance of considering all the potential vent locations of a volcanic system, in order to capture the full eruption catalogue in analyses (e.g., 11 eruptions over 26 ky for the OVC, versus only 5 eruptions over 26 ky for the Tarawera LVZ), as well as the full potential distribution of tephra hazard. Although the Tarawera LVZ has been prominently discussed in studies of OVC hazard because of is recent activity (1886 and ~1315 AD), we find that, in the event of future eruption, the likelihood of a vent opening within the Haroharo LVZ (last eruption 5.6 ka) is equivalent (< 1% difference) to that for the Tarawera LVZ (31.8% compared to 32.5%). We also find that an eruption from within the Haroharo LVZ presents a relatively higher hazard to several localities, such as the town of Kawerau, where the average absolute probability of accumulating ≥ 10 kg m-2 of tephra is 1.3 times greater than for an eruption from within the Tarawera LVZ. While the absolute probabilities of accumulating ≥ 10 kg m-2 of tephra in the next one year from a basaltic Plinian eruption are on average 7.2 times lower than for a rhyolitic Plinian eruption throughout the surrounding region, our results suggest that the hazard posed by a basaltic Plinian eruption does contribute to the overall OVC tephra hazard, raising absolute probabilities for the entire OVC by an order of 0.14, which may have implications when considering sensitive decision-making thresholds.386 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Physical characterization of explosive volcanic eruptions based on tephra deposits: Propagation of uncertainties and sensitivity analysis
Regardless of the recent advances in geophysical monitoring and real-time quantitative observations of explosive volcanic eruptions, the characterization of tephra deposits remains one of the largest sources of information on Eruption Source Parameters (ESPs) (i.e. plume height, erupted volume/mass, Mass Eruption Rate — MER, eruption duration, Total Grain-Size Distribution — TGSD). ESPs are crucial for the characterization of volcanic systems and for the compilation of comprehensive hazard scenarios but are naturally associated with various degrees of uncertainties that are traditionally not well quantified. Recent studies have highlighted the uncertainties associated with the estimation of ESPs mostly related to: i) the intrinsic variability of the natural system, ii) the observational error and iii) the strategies used to determine physical parameters. Here we review recent studies focused on the characterization of these uncertainties and we present a sensitivity analysis for the determination of ESPs and a systematic investigation to quantify the propagation of uncertainty applied to two case studies. In particular, we highlight the dependence of ESPs on specific observations used as input parameters (i.e. diameter of the largest clasts, thickness measurements, area of isopach contours, deposit density, downwind and crosswind range of isopleth maps, and empirical constants and wind speed for the determination of MER). The highest uncertainty is associated to the estimation of MER and eruption duration and is related to the determination of crosswind range of isopleth maps and the empirical constants used in the empirical parameterization relating MER and plume height. Given the exponential nature of the relation between MER and plume height, the propagation of uncertainty is not symmetrical, and both an underestimation of the empirical constant and an overestimation of plume height have the highest impact on the final outcome. A ± 20% uncertainty on thickness measurements, area of isopach contours, integration limit for the power-law fit and deposit density result in ESP uncertainties ≤± 20% for plume height and erupted volume/mass. Finally, a third case study has also been used to explore the sensitivity of the Voronoi Tessellation strategy for the determination of TGSD and the inversion on both mass/area and grain-size data for the determination of erupted mass and plume height. Results confirm the validity of the methods but also the strong dependence on the distribution and number of observations.71 5 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Long-term multi-hazard assessment for El Misti volcano (Peru)
(2014); ; ; ; We propose a long-term probabilistic multi-hazard assessment for El Misti Volcano, a composite cone located <20 km from Arequipa. The second largest Peruvian city is a rapidly expanding economic centre and is classified by UNESCO as World Heritage. We apply the Bayesian Event Tree code for Volcanic Hazard (BET_VH) to produce probabi- listic hazard maps for the predominant volcanic phenomena that may affect c.900,000 people living around the volcano. The methodology accounts for the natural variability displayed by volcanoes in their eruptive behaviour, such as different types/sizes of eruptions and possible vent locations. For this purpose, we treat probabilistically several model runs for some of the main hazardous phenomena (lahars, pyroclastic density currents (PDCs), tephra fall and ballistic ejecta) and data from past eruptions at El Misti (tephra fall, PDCs and lahars) and at other volcanoes (PDCs). The hazard maps, although neglecting possible interactions among phenomena or cascade effects, have been produced with a homogeneous method and refer to a common time window of 1 year. The probability maps reveal that only the north and east suburbs of Arequipa are exposed to all volcanic threats except for ballistic ejecta, which are limited to the uninhabited but touristic summit cone. The probability for pyroclastic density currents reaching recently expanding urban areas and the city along ravines is around 0.05 %/year, similar to the probability obtained for roof-critical tephra load- ing during the rainy season. Lahars represent by far the most probable threat (around 10 %/year) because at least four radial drainage channels can convey them approximately 20 km away from the volcano across the entire city area in heavy rain episodes, even without eruption. The Río Chili Valley repre- sents the major concern to city safety owing to the probable cascading effect of combined threats: PDCs and rockslides, dammed lake break-outs and subsequent lahars or floods. Although this study does not intend to replace the current El Misti hazard map, the quantitative results of this probabilistic multi-hazard assessment can be incorporated into a multi-risk analysis, to support decision makers in any future improvement of the current hazard evaluation, such as further land-use planning and possible emergency management.354 64
