Ippolito, Alessandro
Preferred name
Ippolito, Alessandro
Email
alessandro.ippolito@ingv.it
Staff
staff
ORCID
The search returned 14 results
Now showing 1 - 10 of 14
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Precursory worldwide signatures of earthquake occurrences on Swarm satellite data
The study of the preparation phase of large earthquakes is essential to understand the physical processes involved, and potentially useful also to develop a future reliable short-term warning system. Here we analyse electron density and magnetic field data measured by Swarm three-satellite constellation for 4.7 years, to look for possible in-situ ionospheric precursors of large earthquakes to study the interactions between the lithosphere and the above atmosphere and ionosphere, in what is called the Lithosphere-Atmosphere-Ionosphere Coupling (LAIC). We define these anomalies statistically in the whole space-time interval of interest and use a Worldwide Statistical Correlation (WSC) analysis through a superposed epoch approach to study the possible relation with the earthquakes. We find some clear concentrations of electron density and magnetic anomalies from more than two months to some days before the earthquake occurrences. Such anomaly clustering is, in general, statistically significant with respect to homogeneous random simulations, supporting a LAIC during the preparation phase of earthquakes. By investigating different earthquake magnitude ranges, not only do we confirm the well-known Rikitake empirical law between ionospheric anomaly precursor time and earthquake magnitude, but we also give more reliability to the seismic source origin for many of the identified anomalies.1607 160 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , foF2 variations measured by the Rome observatory during solar minimum in the last three solar cycles
The last three solar cycles have been considered for a study on the variation of the ionospheric parameter foF2 during solar minimum. Hourly observations recorded by the ionospheric station of Rome have been considered for the years 1985, 1986, 1987, 1995, 1996, 1997, 2007, 2008 and 2009. Background values of foF2 have been computed considering a 27-day running median. A variation of foF2 of more than ± 15% over the background level and with a minimum duration of 3 hours, is here considered as an anomaly. For each anomaly, a study of the geomagnetic condition has been carried out, considering the value of the ap index at the time when the anomaly is detected and for the previous 24 hours. The auroral electrojet index AE has also been investigated in relation with each observed foF2 anomaly, considering 6 hours before the occurrence of the anomaly since TADs, related to upsurges of auroral activity, can reach middle latitudes and consequently perturb the F2 layer. A characterization of the observed foF2 anomalies with respect to the related geomagnetic conditions is presented in this work. Two foF2 storms are studied here in detail, analysing the solar sources.84 288 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A method for automatic detection of equatorial spread-F in ionograms
A method is presented for automatic detection of spread-F. The method is based on an image recognition technique and is applied to ionograms recorded at the ionospheric station of Tucumán (26.9°S, 294.6°E). The performance achieved is statistically evaluated and demonstrated with significant examples. The proposed method improves Autoscala's ability to reject ionograms with insufficient information, including those featuring Spread-F. Automatic identification of cases of spread-F is of additional interest in Space Weather applications, when it helps detect degraded radio propagation conditions. The present data analysis is a retrospective study but forms the basis for real-time application as an extension of Autoscala’s capabilities.277 258 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Magnetic Field and Electron Density Data Analysis from Swarm Satellites Searching for Ionospheric Effects by Great Earthquakes: 12 Case Studies from 2014 to 2016
We analyse Swarm satellite magnetic field and electron density data one month before and one month after 12 strong earthquakes that have occurred in the first 2.5 years of Swarm satellite mission lifetime in the Mediterranean region (magnitude M6.1+) or in the rest of the world (M6.7+). The search for anomalies was limited to the area centred at each earthquake epicentre and bounded by a circle that scales with magnitude according to the Dobrovolsky’s radius. We define the magnetic and electron density anomalies statistically in terms of specific thresholds with respect to the same statistical quantity along the whole residual satellite track (|geomagnetic latitude| ≤ 50°, quiet geomagnetic conditions). Once normalized by the analysed satellite tracks, the anomalies associated to all earthquakes resemble a linear dependence with earthquake magnitude, so supporting the statistical correlation with earthquakes and excluding a relationship by chance.771 477 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Autoscaled MUF assimilation in RATIM
A combined vertical and oblique radio-soundings data assimilation procedure is proposed for the Regional Assimilative Three-dimensional Ionospheric Model (RATIM). As described in a previous paper [1], RATIM has demonstrated a good degree of adaptability to different ionospheric conditions, when vertical plasma frequency profiles fp(h) over the Italian area are ingested. The fp(h) assimilation procedure consists in minimizing the root-mean-square deviation RMSD between the observed and modeled profiles at the locations where observations are available. This enables the model to adjust the values of some ionospheric parameters previously described on empirical bases, testing a wide set of values for their variations. Hence, such variations are effectively RATIM free parameters, as they are varied until the best fit for the available profiles is obtained. A Maximum Usable Frequencies (MUFs) ingestion technique has been subsequently introduced in RATIM. A simple HF ray-tracing technique has been used to model the ground range D of a particular radio-link, evaluating the skip distance for a signal obliquely transmitted towards a specific ionosphere, when the signal frequency is set equal to the MUF for the radio-link itself. A simplified ionosphere between the transmitter and the receiver is assumed, extending the same parabolic fp(h) to the whole radio-propagation channel. This profile is constrained to some F2 characteristics linked to the RATIM free parameters. A comparison between the real and simulated D values is then performed for each combination of the free parameters tested during the fp(h) ingestion, introducing a further condition to the fp(h) RMSD minimization. Preliminary studies of the application of this method are presented, when the MUF-ingesting version of RATIM has been applied to the Japanese-South Korean region, and the MUF values ingested have been obtained by the Oblique Ionogram Automatic Scaling Algorithm (OIASA) [2, 3]. RATIM adaptability has been tested, comparing the percentages of success of the adjustment procedure when only fp(h) are ingested and applying the MUFs assimilation with different thresholds for the ΔD=|D[real]-D[RATIM]| values to be acceptable. The minimized fp(h) RMSD values have been also compared in such conditions, along with the ΔD values obtained in adapting conditions. The RATIM ability to reject incorrect data has also been tested, when fp(h) and MUF values are validated by an expert operator.112 135 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Applicazione di OIASA a ionogrammi obliqui di scarsa qualità
Lo studio riguarda l’applicazione del sistema OIASA (Oblique Ionogram Automatic Scaling Algorithm) per l’interpretazione automatica degli ionogrammi obliqui a un set di 288 ionogrammi test di scarsa qualità registrati a Icheon (37.14°N, 127.55°E), Corea del Sud, dalla ionosonda VIPIR2 (Vertical Incidence Pulsed Ionospheric Radar, Version 2), allo scopo di testare la capacità di OIASA di scartare ionogrammi non interpretabili a mano da un operatore e così ridurre il numero di output erronei. Alla base del funzionamento di OIASA vi è una tecnica di riconoscimento dell’immagine utilizzata per scalare dagli ionogrammi la Maximum Usable Frequency (MUF) tra le ionosonde ricevente e trasmittente. Allo scopo di ridurre il numero di falsi positivi sono state applicate tecniche di scarto basate sul metodo del massimo contrasto e sull’utilizzo combinato di un algoritmo di conversione degli ionogrammi obliqui in ionogrammi verticali equivalenti e del software Autoscala. Quest’ultima procedura permette di associare a ciascuna MUF autoscalata un valore di un fattore di qualità definito come differenza tra il valore di foF2 ottenuto da Autoscala e quello ricavato dalla MUF stessa per mezzo della legge della secante. I valori delle soglie da applicare ai processi di scarto sono stati infine ottenuti applicando il metodo della curva ROC (Receiver Operating Characteristic curve) al data set in esame.90 215 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Oblique Ionograms Automatic Scaling Algorithm OIASA application to the ionograms recorded by Ebro observatory ionosonde
The oblique ionograms automatic scaling algorithm (OIASA), developed at the INGV for the identification of trace of oblique ionograms, allows the determination of the maximum usable frequency (MUF) for communication between the transmitter and receiver, automatically rejecting poor quality ionograms. A test of the algorithm using data from a campaign of oblique soundings between Dourbes (50.1°N, 4.6°E) and Roquetes (40.8°N, 0.5°E) has been performed. Oblique soundings from three different campaigns have been studied, covering different geomagnetic conditions, in order to study the behavior of the autoscaling algorithm under quiet and perturbed geomagnetic periods. The reported results demonstrate that OIASA performance is not influenced by geomagnetic or ionospheric activity conditions. This demonstrates a satisfactory performance of the automatic scaling algorithm, even under different geomagnetic conditions, the potential application of OIASA as a near-real-time tool for ionospheric monitoring purposes, and its performance for tracking ionospheric effects caused by space weather events.174 191 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , OIASA application to oblique radio-sounding data recorded in Korea
(2017-04-23); ; ; ; The Oblique Ionogram Automatic Scaling Algorithm (OIASA) has been applied to a data set of oblique ionograms recorded by the Vertical Incidence Pulsed Ionospheric Radar, Version 2 (VIPIR2) ionosonde receiver in Korea. These ionograms are the result of the real-time oblique radio-soundings performed every 15 minutes since September 12, 2016 (day 256) between the Japanese National Institute of Communications Technology ionospheric stations of Kokubunji (35.71°N, 139.46°E), Yamagawa (31.18°N, 130.59°E), Ogimi (26.70°N, 128.12°E), and Sarabetsu (45.18°N, 141.76°E), and the Korean Space Weather Center stations of Icheon (37.14°N, 127.55°E) and Jeju (33.43°N, 126.29°E). A set of 288 poor-quality test mode ionograms for each of the 8 different radiolinks has been selected for this study, and the results are presented. In order to scale the Maximum Usable Frequencies (MUF) between the receiving and the transmitting ionosondes, a filtering procedure for the ionograms noise reduction has been applied in combination with an image recognition technique. Vertical equivalent ionograms have been then obtained using Martyn’s equivalent path theorem, and processed by Autoscala.163 123 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , NeQuick2 and IRI2012 models applied to mid and high latitudes, and the Antarctic ionosphere
(2017-01); ; ; ; Within the framework of the AUSPICIO (AUtomatic Scaling of Polar Ionograms and Co-operative Ionospheric Observations) project, a limited sample of ionograms recorded mostly in 2001 and 2009, and to a lesser extent in 2006–07 and 2012–15, at the ionospheric observatories of Hobart and MacquarieIsland (mid-latitude), Comandante FerrazandLivingstoneIsland(high latitude),andCasey, Mawson, Davis and Scott Base (inside the Antarctic Polar Circle (APC)) were considered to study the capability of the NeQuick2 and IRI2012 models for predicting the behaviour of the ionosphere at mid- and high latitudes and over the Antarctic area. The applicability of NeQuick2 and IRI2012 was evaluated as i) climatological models taking as input the F 10.7 solar activity index and ii) assimilative models ingesting the foF2 and hmF2 measurements obtained from the electron density profiles provided bytheAdaptiveIonosphericProfiler(AIP). Thestatisticalanalysisresults reveal thatthe bestdescription of the ionosphere’s electron density is achieved when the AIP measurements are ingested into the NeQuick2 and IRI2012 models. Moreover, NeQuick2 performance is far better than IRI2012 performance outside the APC. Conversely, the IRI2012 model performs better than the NeQuick2 model inside the APC.304 7 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A procedure for the reliability improvement of the oblique ionograms automatic scaling algorithm
A procedure made by the combined use of the Oblique Ionogram Automatic Scaling Algorithm(OIASA) and Autoscala program is presented. Using Martyn’s equivalent path theorem, 384 oblique soundingsfrom a high-quality data set have been converted into vertical ionograms and analyzed by Autoscala program.The ionograms pertain to the radio link between Curtin W.A. (CUR) and Alice Springs N.T. (MTE), Australia,geographical coordinates (17.60°S; 123.82°E) and (23.52°S; 133.68°E), respectively. The critical frequency foF2values extracted from the converted vertical ionograms by Autoscala were then compared with the foF2valuesderived from the maximum usable frequencies (MUFs) provided by OIASA. A quality factor Q for the MUF valuesautoscaled by OIASA has been identified. Q represents the difference between the foF2value scaled byAutoscala from the converted vertical ionogram and the foF2value obtained applying the secant law to theMUF provided by OIASA. Using the receiver operating characteristic curve, an appropriate threshold level Qtwas chosen for Q to improve the performance of OIASA.293 151
