Dingwell, Donald Bruce
Preferred name
Dingwell, Donald Bruce
Alternative Name
Dingwell, D. B.
Dingwell, Donald B
ORCID
Scopus Author ID
7005060998
Researcher ID
A-4724-2011
37 results
Filters
Settings
The search returned 37 results
Now showing 1 - 10 of 37
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Coupled surface to deep Earth processes: Perspectives from TOPO-EUROPE with an emphasis on climate- and energy-related societal challenges
Understanding the interactions between surface and deep Earth processes is important for research in many diverse scientific areas including climate, environment, energy, georesources and biosphere. The TOPO-EUROPE initiative of the International Lithosphere Program serves as a pan-European platform for integrated surface and deep Earth sciences, synergizing observational studies of the Earth structure and fluxes on all spatial and temporal scales with modelling of Earth processes. This review provides a survey of scientific developments in our quantitative understanding of coupled surface-deep Earth processes achieved through TOPO-EUROPE. The most notable innovations include (1) a process-based understanding of the connection of upper mantle dynamics and absolute plate motion frames; (2) integrated models for sediment source-to-sink dynamics, demonstrating the importance of mass transfer from mountains to basins and from basin to basin; (3) demonstration of the key role of polyphase evolution of sedimentary basins, the impact of pre-rift and pre-orogenic structures, and the evolution of subsequent lithosphere and landscape dynamics; (4) improved conceptual understanding of the temporal evolution from back-arc extension to tectonic inversion and onset of subduction; (5) models to explain the integrated strength of Europe's lithosphere; (6) concepts governing the interplay between thermal upper mantle processes and stress-induced intraplate deformation; (7) constraints on the record of vertical motions from high-resolution data sets obtained from geo-thermochronology for Europe's topographic evolution; (8) recognition and quantifications of the forcing by erosional and/or glacial-interglacial surface mass transfer on the regional magmatism, with major implications for our understanding of the carbon cycle on geological timescales and the emerging field of biogeodynamics; and (9) the transfer of insights obtained on the coupling of deep Earth and surface processes to the domain of geothermal energy exploration. Concerning the future research agenda of TOPO-EUROPE, we also discuss the rich potential for further advances, multidisciplinary research and community building across many scientific frontiers, including research on the biosphere, climate and energy. These will focus on obtaining a better insight into the initiation and evolution of subduction systems, the role of mantle plumes in continental rifting and (super)continent break-up, and the deformation and tectonic reactivation of cratons; the interaction between geodynamic, surface and climate processes, such as interactions between glaciation, sea level change and deep Earth processes; the sensitivity, tipping points, and spatio-temporal evolution of the interactions between climate and tectonics as well as the role of rock melting and outgassing in affecting such interactions; the emerging field of biogeodynamics, that is the impact of coupled deep Earth – surface processes on the evolution of life on Earth; and tightening the connection between societal challenges regarding renewable georesources, climate change, natural geohazards, and novel process-understanding of the Earth system.47 73 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Characterising vent and crater shape changes at Stromboli: implications for risk areas
(2021-06-09); ; ; ; Active volcanoes are typically subject to frequent substantial topographic changes as well as variable eruption intensity, style and/or directionality. Gravitational instabilities and local accumulation of pyroclasts affect conditions at the active vents, through which gas-particle jets are released. In turn, the vent geometry strongly impacts the eruption characteristics. Here, we compare five high-resolution topographic data sets (<4 cm/pixel) of volcanic craters and vents from Stromboli volcano, Italy, that were acquired by unoccupied aerial vehicle (UAV) during five field campaigns between May 2019 and January 2020. This period includes two paroxysmal explosions (3 July and 28 August 2019) and exhibited significant changes on day-to-month timescales. Our results highlight changes to vent geometry and their strong control on the directionality of explosions. Recurrent UAV surveys enable the monitoring of temporal morphologic changes and aid the interpretation of observed changes in eruption style. Ultimately, this may contribute to repeatedly revised risk areas on permanently active volcanoes, especially those that are important tourist destinations.440 104 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Raman Spectroscopy from Laboratory and Proximal to Remote Sensing: A Tool for the Volcanological Sciences
Here we explore and review some of the latest ideas and applications of Raman spectroscopy to the volcanological sciences. Firstly, we provide a brief overview of how Raman spectral analysis works and how spectra from silicate glasses are interpreted. We then look at specific applications of Raman spectral analysis to the volcanological sciences based on measurements on and studies of natural materials in the laboratory. We conclude by examining the potential for Raman spectral analysis to be used as a field based aid to volcano monitoring via in situ studies of proximal deposits and; perhaps; in remote sensing campaigns.230 101 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Gas mobility in rheologically-layered volcanic conduits: The role of decompression rate and crystal content on the ascent dynamics of magmas
Unravelling the rheological behaviour of magmas is fundamental for hazard assessment. At shallow depth the combined effects of degassing, vesiculation and crystallization are likely to produce dramatic changes in the rheology, hence modulating flow dynamics and eruptive style. The rheological evolution from a low viscosity crystal-poor, bubble-free, water-rich melt to a highly viscous crystal-rich, vesicular magma containing a water-poor melt often occurs in the conduit. To clarify the viscous flow dynamics of rheologically-layered volcanic conduits, we performed decompression experiments using a magma analogue system characterized by a low-viscous Layer L (10 Pas) at the bottom and a high-viscous particle-bearing Layer H (≥1000 Pas) at the top. Silicone oils and spherical glass beads are employed as magma and crystal analogues, respectively. Three sets of experiments address the effects of: 1) decompression rate (ca. 10−2 and 104 MPa/s); 2) crystal content in the high viscosity magma (0, 10, 30 and 70 vol.%); and 3) volume ratio of the two rheological layers (0.6 or 0.3). Our results indicate that decompression rate exerts the most dramatic role, yielding changes in time-scale of outgassing up to two orders of magnitude, and affecting the style of decompression response (permeable outgassing or fragmentation). The solid fraction 1) strongly modulates gas mobility, 2) influences the pervasiveness of fragmentation and 3) affects the extent of mingling in the experimental conduit. These results demonstrate that the properties of a shallow, partially-crystallized portion of the magmatic column and its response to varying ascent rate are primary controls on eruptive style.96 160 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Equilibrium Viscosity and Disequilibrium Rheology of a high Magnesium Basalt from Piton De La Fournaise volcano, La Reunion, Indian Ocean, France
Lava flows are a common hazard at basaltic to intermediate volcanoes and have 30 posed a significant threat to La Reunion Island over the past centuries. In sustained flow units, the efficiency of lava transport away from the vent is dominated by cooling. For 32 basaltic to intermediate lavas, it is the ability of the lava to solidify during cooling which exerts a first-order control on spatial extent and flow distance. As a consequence, 34 understanding the sub-liquidus rheology of lavas has become a key focus in lava flow research in the past decade. To date, the development of a systematic understanding of lava 36 rheology during emplacement conditions has been significantly hampered by a lack of experimental data. Here we present new data on the rheological evolution of crystallizing 38 high-Mg basalt from Piton de la Fournaise. Sub-liquidus experiments were performed at constant cooling rates ranging from 0.5 to 5 K/min. Those rates mimic thermal conditions 40 experienced 1) by lava during flow on the surface and 2) by magma during dike and sill emplacement. Our data show that the effective viscosity of the crystallizing suspension 42 increases until reaching a specific sub-liquidus temperature, the so-called “rheological cut- off temperature” (Tcutoff), at which the lava becomes rheologically immobile and flow 44 ceases. This departure from the pure liquid viscosity curve to higher viscosity is a consequence of rapid crystallization and its variability for a given lava is found to be 46 primarily controlled by the imposed cooling rate. Based on these experimental data, we adapt the failure forecasting method (FFM) - commonly used to describe the self- 48 accelerating nature of seismic signals to forecast material failure - to predict the rheological cut-off temperature (Tcutoff). The presented data substantially expand the 50 modest experimental database on non-equilibrium rheology of lavas and represent a step towards understanding the underlying process dynamics.76 79 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Stability of volcanic ash aggregates and break-up processes
Numerical modeling of ash plume dispersal is an important tool for forecasting and mitigating potential hazards from volcanic ash erupted during explosive volcanism. Recent tephra dispersal models have been expanded to account for dynamic ash aggregation processes. However, there are very few studies on rates of disaggregation during transport. It follows that current models regard ash aggregation as irrevocable and may therefore overestimate aggregation-enhanced sedimentation. In this experimental study, we use industrial granulation techniques to artificially produce aggregates. We subject these to impact tests and evaluate their resistance to break-up processes. We find a dependence of aggregate stability on primary particle size distribution and solid particle binder concentration. We posit that our findings could be combined with eruption source parameters and implemented in future tephra dispersal models.76 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Ash aggregation enhanced by deposition and redistribution of salt on the surface of volcanic ash in eruption plumes
(2017-03-31); ; ; ; Interactions with volcanic gases in eruption plumes produce soluble salt deposits on the surface of volcanic ash. While it has been postulated that saturation-driven precipitation of salts following the dissolution of ash surfaces by condensed acidic liquids is a primary mechanism of salt formation during an eruption, it is only recently that this mechanism has been subjected to detailed study. Here we spray water and HCl droplets into a suspension of salt-doped synthetic glass or volcanic ash particles, and produce aggregates. Deposition of acidic liquid droplets on ash particles promotes dissolution of existing salts and leaches cations from the underlying material surface. The flow of liquid, due to capillary forces, will be directed to particle-particle contact points where subsequent precipitation of salts will cement the aggregate. Our data suggest that volcanically-relevant loads of surface salts can be produced by acid condensation in eruptive settings. Several minor and trace elements mobilised by surface dissolution are biologically relevant; geographic areas with aggregation-mediated ash fallout could be "hotspots" for the post-deposition release of these elements. The role of liquids in re-distributing surface salts and cementing ash aggregates also offers further insight into the mechanisms which preserve well-structured aggregates in some ash deposits.121 125 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , A Branched Magma Feeder System during the 1669 Eruption of Mt Etna: Evidence from a Time-integrated Study of Zoned Olivine Phenocryst Populations
(2017-03-01); ; ; ; The 1669 eruption of Mt Etna was one of the most voluminous and devastating of its flank eruptions in historical times. Despite a large body of relevant research, knowledge of the timing and duration of magma transfer and magma recharge through the internal plumbing system preceding and during the eruption is still limited. To address that lack of knowledge, we apply a three-way integrated method, linking systems analysis of crystals, a time-integrated study of zoned olivine populations, and a forward-modelling approach using thermodynamic calculations. Analysis of 202 olivine crystals erupted during the initial (pre-March 20, i.e. SET1) and the final (post-March 20; i.e. SET2 and MtRs) stages of the eruption reveals the existence of three magmatic environments (MEs) in which the majority of the olivine cores [M1 (= Fo75–78)] and rims [i.e. M5 (= Fo51–59) and M3 (= Fo65–69)] formed. Application of the rhyolite-MELTS software allowed us to constrain the key intensive variables associated with these MEs. We find that temperature, water content and oxidation state vary between these MEs. Application of diffusion modelling to the zoned olivine crystals allowed us to reconstruct the timing and chronology of melt and crystal transfer prior to and during the 1669 flank eruption. We find that, following the formation of the olivine cores [M1 (= Fo75–78)], the reservoir M1 was intruded by batches of more evolved, degassed and possibly aphyric M5-type magma, commencing 1·5 years prior to eruptive activity. This is the origin of the SET1 olivine rims (i.e. Fo51–59). In the months prior to eruption, timescale data show that recharge activity along the newly established pathway M1–M5 increased notably. Starting in November 1668, only a few weeks after the first intrusive episode into the M1 reservoir, a second pulse of magma injections (M3-type magma) occurred and a new pathway M1–M3 opened; this is how the SET2 olivine rims (i.e. Fo65–69) formed. For several weeks a bifurcated transport system with two dominant magma pathways developed along M1–M5 and M1–M3 dyke injections. Accompanied by vigorous seismicity, in the days immediately before eruption the local magma transfer dynamics changed and the M1–M5 recharge activity slowed down, as shown by a relative lack of crystals recording shorter timescales. M1–M3 recharge, however, remained high and persisted following the eruption onset on March 11, during which the SET1 lavas were drained. We propose that the change of the local magma transfer dynamics might be linked to changes in the local stress field brought on during eruption. This may potentially have been due to repeated dyke injections into Etna’s shallow plumbing system disrupting the early M1–M5 pathway and at the same time stabilizing the M1–M3 route as a dominant feeder. This transfer of system feeding would reproduce the observed syn-eruptive recharge and mixing in the weeks following eruption onset, culminating in the eruption of the later SET2 lavas.75 2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Magma Mixing: History and Dynamics of an Eruption Trigger
The most violent and catastrophic volcanic eruptions on Earth have been triggered by the refilling of a felsic volcanic magma chamber by a hotter more mafic magma. Examples include Vesuvius 79 AD, Krakatau 1883, Pinatubo 1991, and Eyjafjallajökull 2010. Since the first hypothesis, plenty of evidence of magma mixing processes, in all tectonic environments, has accumulated in the literature allowing this natural process to be defined as fundamental petrological processes playing a role in triggering volcanic eruptions, and in the generation of the compositional variability of igneous rocks. Combined with petrographic, mineral chemistry and geochemical investigations, isotopic analyses on volcanic rocks have revealed compositional variations at different length scales pointing to a complex interplay of fractional crystallization, mixing/mingling and crustal contamination during the evolution of several magmatic feeding systems. But to fully understand the dynamics of mixing and mingling processes, that are impossible to observe directly, at a realistically large scale, it is necessary to resort to numerical simulations of the complex interaction dynamics between chemically different magmas.96 246 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Hydrothermal activity and subsoil complexity: implication for degassing processes at Solfatara crater, Campi Flegrei caldera
The Solfatara area and its fumaroles are the main surface expression of the vigorous hydrothermal activity within the active Campi Flegrei caldera system. At depth, a range of volcanic and structural processes dictate the actual state of the hydrothermal system below the crater. The presence of a large variety of volcanic products at shallow depth (including pyroclastic fallout ash beds, pyroclastic density current deposits, breccias, and lavas), and the existence of a maar-related fault system appears to exert major controls on the degassing and alteration behavior. Adding further to the complexity of this environment, variations in permeability and porosity, due to subsoil lithology and alteration effects, may further influence fluid flow towards the surface. Here, we report results from a field campaign conducted in July 2015 that was designed to characterize the in situ physical (temperature, humidity) and mechanical (permeability, strength, stiffness) properties of the Solfatara crater subsoil. The survey also included a mapping of the surficial hydrothermal features and their distributions. Finally, laboratory measurements (porosity, granulometry) of selected samples were performed. Our results enable the discrimination of four main subsoils around the crater: (1) the Fangaia domain located in a topographic low in the southwestern sector, (2) the silica flat domain on the western altered side, (3) the new crust domain in the central area, and (4) the crusted hummocks domain that dominates the north, east, and south parts. These domains are surrounded by encrusted areas, reworked material, and vegetated soil. The distribution of these heterogeneous subsoils suggests that their formation is mostly related to (i) the presence of the Fangaia domain within the crater and (ii) a system of ring faults bordering it. The subsoils show an alternation between very high and very low permeabilities, a fact which seems to affect both the temperature distribution and surficial degassing. A large range of surface temperatures (from 25 up to 95 °C) has been measured across these surfaces, with the hottest spot corresponding to the mud pools, the area of new crust formation, and the crusted hummocks. In the subsoil, the distribution of temperature is more complex and controlled by the presence of coarser, and more permeable, sandy/pebbly levels. These act as preferential pathways for hot hydrothermal fluid circulation. In contrast, low permeability, fine-grained levels act as thermal insulators that remain relatively cold and hinder fluid escape to the surface. Hot gases reach the surface predominantly along (vertical) fractures. When this occurs, mound-like structures can be formed by a cracking and healing process associated with significant degassing. It is anticipated that the results presented here may contribute to an improved understanding of the hazard potential associated with the ongoing hydrothermal activity within the Solfatara crater. At this site the permeability of the near-surface environment and its changes in space and time can affect the spatial and temporal distribution of gas and heat emission. Particularly, in areas where reduction in permeability occurs, it can produce pore pressure augmentation that may result in explosive events.75 4
