Skip to main content
The search returned 9 results
Now showing 1 - 9 of 9
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Present-day uplift of the European Alps: Evaluating mechanisms and models of their relative contributions

    Recent measurements of surface vertical displacements of the European Alps show a correlation between vertical velocities and topographic features, with widespread uplift at rates of up to ~2–2.5 mm/a in the North-Western and Central Alps, and ~1 mm/a across a continuous region from the Eastern to the South-Western Alps. Such a rock uplift rate pattern is at odds with the horizontal velocity eld, characterized by shortening and crustal thickening in the Eastern Alps and very limited deformation in the Central and Western Alps. Proposed me- chanisms of rock uplift rate include isostatic response to the last deglaciation, long-term erosion, detachment of the Western Alpine slab, as well as lithospheric and surface de ection due to mantle convection. Here, we assess previous work and present new estimates of the contributions from these mechanisms. Given the large range of model estimates, the isostatic adjustment to deglaciation and erosion are su cient to explain the full observed rate of uplift in the Eastern Alps, which, if correct, would preclude a contribution from horizontal shortening and crustal thickening. Alternatively, uplift is a partitioned response to a range of mechanisms. In the Central and Western Alps, the lithospheric adjustment to deglaciation and erosion likely accounts for roughly half of the rock uplift rate, which points to a noticeable contribution by mantle-related processes such as detachment of the European slab and/or asthenospheric upwelling. While it is di cult to independently constrain the patterns and magnitude of mantle contributions to ongoing Alpine vertical displacements at present, future data should provide additional insights. Regardless, interacting tectonic and surface mass redistribution processes, rather than an individual forcing, best explain ongoing Alpine elevation changes.
      156  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Aegean tectonics: Strain localisation, slab tearing and trench retreat

    We review the geodynamic evolution of the Aegean–Anatolia region and discuss strain localisation there over geological times. From Late Eocene to Present, crustal deformation in the Aegean backarc has localised progressively during slab retreat. Extension started with the formation of the Rhodope Metamorphic Core Complex (Eocene) and migrated to the Cyclades and the northern Menderes Massif (Oligocene and Miocene), accommodated by crustal-scale detachments and a first series of core complexes (MCCs). Extension then localised in Western Turkey, the Corinth Rift and the external Hellenic arc after Messinian times, while the North Anatolian Fault penetrated the Aegean Sea. Through time the direction and style of extension have not changed significantly except in terms of localisation. The contributions of progressive slab retreat and tearing, basal drag, extrusion tectonics and tectonic inheritance are discussed and we favour a model (1) where slab retreat is the main driving engine, (2) successive slab tearing episodes are the main causes of this stepwise strain localisation and (3) the inherited heterogeneity of the crust is a major factor for localising detachments. The continental crust has an inherited strong heterogeneity and crustal-scale contacts such as major thrust planes act as weak zones or as zones of contrast of resistance and viscosity that can localise later deformation. The dynamics of slabs at depth and the asthenospheric flow due to slab retreat also have influence strain localisation in the upper plate. Successive slab ruptures from the Middle Miocene to the Late Miocene have isolated a narrow strip of lithosphere, still attached to the African lithosphere below Crete. The formation of the North Anatolian Fault is partly a consequence of this evolution. The extrusion of Anatolia and the Aegean extension are partly driven from below (asthenospheric flow) and from above (extrusion of a lid of rigid crust).
      469  6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    From mantle to crust: Stretching the Mediterranean

    (2009-07-09) ; ; ;
    Jolivet, L.; ISTO, UMR 6113, Université d'Orléans 1A, Rue de la Férollerie, 45071 Orléans Cedex 2, France
    ;
    Faccenna, C.; Dipartimento di Scienze Geologiche, University of Roma Tre, Largo San Murialdo 1, 00146 Rome, Italy
    The origin of forces driving the deformation of the continental crust near subduction zones and especially in backarc regions is debated. Thiswork is based on a compilation of SKS fast splitting directions that give an image of flowlines in themantle around theMediterranean subduction zones and a comparisonwith stretching and shear directions in metamorphic core complexes that show the pattern of deformation at the scale of the middle and lower crusts.We find that : (1) the two sets of directions are parallel in the three main backarc regions, namely the Alboran Sea, the Tyrrhenian Sea and the Aegean Sea showing that the lithosphere deformswith the samedirection of stretching in the crust and themantle, suggesting that (2) crustal deformation ismainly driven frombelowby slab retreat, and (3) the lithospheric fabric is reset within a few millions of years in backarc environments.
      363  43
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Reply to the comment by G. Capponi et al. on "Subduction polarity reversal at the junction between the Western Alps and the Northern Apennines, Italy", by G. Vignaroli et al. (Tectonophysics, 2008, 450, 34-50)

    We first would like to thank Capponi et al. (2008) for their comments and criticisms on our paper, offering us the opportunity to discuss the data and the model presented in Vignaroli et al. (2008a) and clarify the geological rationale behind our manuscript. Vignaroli et al. (2008a) presented a large-scale reconstruction on the evolution of the Western Alpine–Northern Apennine junction, based on shallow geological information derived from the Northern Apennines, the Western and Ligurian Alps coupled with deep mantle structures from seismic tomography and tectonic reconstructions. The aim of this paper is then to give an alternative, though simplified, tectonic solution to the long-standing debate concerning the polarity of the subduction zone in the central Mediterranean and its linkage with the Alpine orogeny and the formation of the arcs belt. We condensed and simplified the huge wealth of geological information using cross-sections along the three orogenic segments. One of the main points of the paper is that the Voltri Massif of the Ligurian Alps is reinterpreted as an eclogitic-bearing domain exhumed by means of ductile-to-brittle extensional detachment tectonics with a top-to-the-W sense of shear. In this view, the orogenic architecture and evolution of the Ligurian Alps presents affinities (both for geometry and timing of deformation) with the widely accepted extensional structures recognized in the Western Alps, in the Northern Apennines and, in general, in Alpine-type orogenic belts of the Mediterranean. The detailed comment made by Capponi et al. (2008) is indeed centred on the tectonic structure of the Voltri Massif (probably this comment should have been addressed to our companion paper, Vignaroli et al., 2008b, focused on the Voltri Massif structures and available on-line on March 2008). The main point of the comment is that the exhumation of High-Pressure (HP) metamorphic units exposed in the Voltri Massif was produced by thrusts rather than by syn-orogenic extensional detachments. In this reply, we would first like to make some general considerations on the criteria/concepts adopted for the interpretation of the exhumation-related structures and we will then discuss point-by-point the criticism of Capponi et al., 2008 Capponi, G., Crispini, L., Scambelluri, M., 2008. Comment on "Subduction polarity reversal at the junction between the Western Alps and the Northern Apennines, Italy", by G. Vignaroli, C. Faccenna, L. Jolivet, C. Piromallo, F. Rossetti. Tectonophysics.Capponi et al. (2008).
      11744  24
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Subduction polarity reversal at the junction between the Western Alps and the Northern Apennines, Italy

    The controversial relationship between the orogenic segments of the Western Alps and the Northern Apennines is here explored integrating recently published 3D tomographic models of subduction with new and re-interpreted geological observations from the eclogitic domain of the Voltri Massif (Ligurian Alps, Italy), where the two belts joint each other. The Voltri Massif is here described as an extensional domain accommodating the opposing outward migration of the Alpine and Apennine thrust fronts, since about 30–35 Ma. Using tomographic images of the upper mantle and paleotectonic reconstructions, we propose that this extensional setting represents the surface manifestation of an along strike change in polarity of the subducted oceanic slab whose polarity changed laterally in space and in time. Our tectonic model suggests that the westward shift of the Alpine thrust front from the Oligocene onward was the consequence of the toroidal asthenospheric flow induced by the retreat of the Apenninic slab.
      270  39
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Lateral slab deformation and the origin of the western Mediterranean arcs

    The western Mediterranean subduction zone (WMSZ) extends from the northern Apennine to southern Spain and turns around forming the narrow and tight Calabrian and Gibraltar Arcs. The evolution of the WMSZ is characterized by a first phase of orogenic wedging followed, from 30 Ma on, by trench retreat and back-arc extension. Combining new and previous geological data, new tomographic images of the western Mediterranean mantle, and plate kinematics, we describe the evolution of the WMSZ during the last 35 Myr. Our reconstruction shows that the two arcs form by fragmentation of the 1500 km long WMSZ in small, narrow slabs. Once formed, these two narrow slabs retreat outward, producing back-arc extension and large scale rotation of the flanks, shaping the arcs. The Gibraltar Arc first formed during the middle Miocene, while the Calabrian Arc formed later, during the late Miocene-Pliocene. Despite the different paleogeographic settings, the mechanism of rupture and backward migration of the narrow slabs presents similarities on both sides of the western Mediterranean, suggesting that the slab deformation is also driven by lateral mantle flow that is particularly efficient in a restricted (upper mantle) style of mantle convection.
      182  37
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Subduction and the depth of convection in the Mediterranean mantle

    (2003) ; ; ; ;
    Faccenna, C.; Dipartimento di Scienze Geologiche, Universita` di Roma Tre
    We tie together geological data, paleotectonic reconstruction, plate motion, and tomographic analysis to unravel the history of subduction and back arc extension of the eastern and central Mediterranean. In these two regions, extensional processes started contemporaneously, around 30 Myr ago, but with marked differences. In the eastern region, the Aegean basin opened slowly ( 1 cm/yr) behind a shallow dipping slab (40–45 ). The corresponding high-velocity anomaly extends inside the upper mantle and can be also followed in the midmantle down to a depth of at least 1500 km. Its descent into the midmantle initiated most probably during the Late Cretaceous, and the trench moved northeastward, following the path of the Eurasian plate and under the persistent push of the African plate. Conversely, in the central Mediterranean region, subduction initiated later, and the motion of the subducting slab is confined to the upper mantle, causing punctuated and rapid episodes of back arc extension (Provenc¸al and Tyrrhenian basins) behind a slab that dips steeply (75 ). We explore the causes that control how the slab subducted and interacted with the lower, more viscous part of the mantle.
      165  33
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The role of pre-existing thrust faults and topography on the styles of extension in the Gran Sasso range (central Italy)

    Structural analysis and field mapping together with simple geometrical and flexural elastic models, document that two styles of Quaternary extensional tectonics characterized the Gran Sasso range (central Apennines, Italy). In the western part of the range, extension took place on 10–15-km-long range-front normal faults with associated 600–1000-m-high escarpments showing evidence of Late Glacial–Holocene activity. This topography has been reproduced with a thin elastic plate subjected to the isostatic forces induced by the movement along high-angle (55°–65°) planar normal faults. In the eastern part of the belt extension occurred on shallow-dipping normal faults (30°–35°) which reactivated progressively deeper pre-existing thrusts. In this area antithetic "domino" faults formed to accommodate the mechanical adjustment of the hanging-wall over a variably dipping major fault surface. The eastward increase in shortening, due to the earlier compressional phase, documented in the Gran Sasso belt by previous authors, accounts for the more developed zones of weakness and high topographic relief in the eastern sector. This setting could explain the different styles of extension and the more advanced northeastern limit of normal faulting in the eastern sector. This work suggests that normal faults can originate either with low- or high-angle geometry in the upper crust according to the pre-existing tectonic setting and that topography could be important in controlling the geometry and pattern of migrating normal faulting.
      207  27
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      115  690