Skip to main content
The search returned 41 results
Now showing 1 - 10 of 41
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    An Innovative Fiber-Optic Hydrophone for Seismology: Testing Detection Capacity for Very Low-Energy Earthquakes

    An innovative fiber-optic hydrophone (FOH) was developed and investigated via an experiment at sea; it is capable of operating at a very low frequency of the seismic spectrum and detecting small magnitude earthquakes. The FOH exploits an optical fiber coil wrapped around a sensitive mandrel in a Michelson interferometric configuration. The FOH operated for about seven days at a water depth of 40 m, in the Campi Flegrei volcanic area (Southern Italy), and a few meters from a well-calibrated PZT hydrophone used as a reference. Thirty-three local earthquakes occurred during the simultaneous operation of the two hydrophones, allowing a straightforward comparison of the recordings. The local earthquakes occurred at an epicentral distance less than 2.5 km from the site of recording, and were estimated to be in the range of magnitude from −0.8 to 2.7. The analysis of the recorded earthquake waveforms in the frequency and time domains allowed retrieving the response function of the FOH in the frequency range from 5 to 70 Hz. The FOH responsivity in terms of acoustic pressure reached about 230 nm/Pa and was flat in the studied frequency range. Due to the high quality of the FOH recordings, this equipment is suitable for applications addressing submarine volcanic activity and the background seismicity of active faults in the ocean.
      77  242
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    On the seafloor horizontal displacement from cGPS and compass data in the Campi Flegrei caldera

    Seafloor deformation monitoring is now routinely performed in the marine sector of the Campi Flegrei volcanic area (Southern Italy). The MEDUSA infrastructure is formed by four buoys deployed at a water depth ranging from 40 to 96 m, and equipped with cGPS receivers, accelerometers and magnetic compasses to monitor the buoy status and a seafloor module with a bottom pressure recorder and other onboard instruments. The analysis of the time series data acquired by the MEDUSA monitoring infrastructure system allows to study the seafloor deformation in the Campi Flegrei caldera with geodetic accuracy. In a previous work, we show that the time series acquired by the Campi Flegrei cGPS onland network and MEDUSA over the period 2017–2020 are in good agreement with the ground deformation field predicted by a Mogi model which is widely used to describe the observed deformation of an active volcano in terms of magma intrusion. Only for one of the buoys, CFBA (A), the data differ significantly from the model prediction, at a level of 6.9 σ and of 23.7 σ for the seafloor horizontal speed and direction, respectively. For this reason, we devised a new method to reconstruct the horizontal sea bottom displacement considering in the analysis both cGPS and compass data. The method, applied to the CFBA buoy measurements and validated also on the CFBC (C) buoy, uses compass data to correct cGPS positions accounting for the pole inclination. Including also systematic errors, the internal consistency, always within ∼ 3 σ for the speed and ∼ 2 σ for the angle, between the results derived for different maximum inclinations of the buoy pole (up to 3.5◦) indicates that the method allows to significantly reduce the impact of the pole inclination which, if not properly taken into account, can alter the estimation of the horizontal seafloor deformation. In particular, we find a good convergence of the retrieved velocity and deformation angle as we include in the analysis data from increasing values of the buoy pole inclination. Taking the result derived assuming the maximum allowed cutoff and accounting for statistical and systematic errors, we found a speed v = (3.521 ± 0.039 (stat) ± 0.352 (syst)) cm/yr and a deformation direction angle α = (−115.159 ± 0.670 (stat) ± 7.630 (syst))◦ (statistical errors at 1 σ quoted from the rms of their values, main systematic errors added linearly). The relative impact of the main potential systematic (statistical) effects increases (decreases) with the cutoff. Our analysis provides a horizontal speed consistent with the model at a level of 5.2 σ (stat only) or of 0.5 σ (stat and syst added linearly), and a deformation angle consistent with the model at 4.3 σ level (stat only) or at 0.3 σ level (stat and syst added linearly). Correspondingly, the module of the vectorial difference between the velocity retrieved from the data and the velocity of the adopted Mogi model diminishes by a factor of 7.65 ± 1.23 (stat) or ± 5.78 (stat + syst) with respect to the previous work. A list of potential improvements to be implemented in the system and instruments is also discussed.
      130  58
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Studio di fattibilità tecnico-scientifico per l’installazione di un profilometro per il monitoraggio delle deformazioni del fondo mare nel Golfo di Pozzuoli, Campi Flegrei

    This report presents a feasibility study aimed to use an innovative instrumentation for the measurement and real-time monitoring of the vertical deformations of the sea floor, which will be integrated in the MEDUSA permanent marine infrastructure installed in the Gulf of Pozzuoli, the submerged part of the Campi Flegrei caldera. The instrumentation consists of a Digital Profile Gauge, which is currently owned by ENI S.p.A. (Italy) in the framework of the agreement between these and INGV. The digital profile gauge consists of a flexible hydraulic circuit containing several pressure sensors, which measure the difference in pressure between one of these and another one used as reference point. This difference is proportional to their relative vertical displacement. The characteristics of the fluid filling the circuit and the quality of the pressure sensors, allows measurements with a sub-centimetric accuracy. The digital profile gauge consists of 15 segments, 200 m long each, which can be arranged in one or more alignments for a total length of 3 km, with sensor spacing every 100 m. In the report a description of the instrumentation and the environmental and technical installation requirements are presented and some installation configurations are proposed. The criteria for choosing these configurations are described; they take into account the technical requirements of the instrumentation, including the constraints for the integration with the MEDUSA infrastructure, the scientific validity of the installation and its contribution to strengthening the surveillance and monitoring system of the study area, managed by the INGV, Sezione di Napoli - Osservatorio Vesuviano. An assessment of the vertical deformations that can be measured from the digital profile gauge was calculated using a simple descriptive model of the deformation field that is well suited to the data collected both from the monitoring networks present on land and by MEDUSA marine infrastructure.
      35  218
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    InSEA Project: Initiatives in Supporting the Consolidation and Enhancement of the EMSO Infrastructure and Related Activities

    <jats:p>The InSEA project (“<jats:underline>In</jats:underline>itiatives in <jats:underline>S</jats:underline>upporting the consolidation and enhancement of the <jats:underline>E</jats:underline>MSO research infrastructure consortium (ERIC) and related <jats:underline>A</jats:underline>ctivities”) has the objective, as the full name of the project indicates, to consolidate and strengthen the infrastructures concerning the EMSO (“European Multidisciplinary Seafloor and water column Observatory”) ERIC (European Research Infrastructure Consortium) and all those technical-scientific activities related to it. In particular, the project is upgrading localized and distributed marine infrastructures, laboratories, observatories and spatial measurement activities in Southern Italian seas to support those activities of surveys in fixed time series points of observation of EMSO ERIC. The project is developing according to six implementation Objectives of Research (OR) that involve four National research Institutions: INGV, ISPRA, OGS and Anton Dohrn Zoological Station of Naples. The paper illustrates with more details the relevant objectives of the InSEA project and its most significant implementation phases.</jats:p>
      435  152
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Moment magnitude (Mw) from hydrophone records of low energy volcanic quakes

    <jats:title>Abstract</jats:title><jats:p>Earthquake magnitude calibration using hydrophone records has been carried out at Campi Flegrei caldera, an active area close to the highly populated area of Naples city, partly undersea. Definite integrals of the hydrophone records amplitude spectra, between the limits of 1 and 20 Hz, were calculated on a set of small volcano-tectonic earthquakes with moment magnitudes ranging from 1 to 3.3. The coefficients of a linear relationship between the logarithm of these integrals and the magnitude were obtained by linear optimization, thus defining a useful equation to calculate the moment magnitude from the hydrophone record spectra. This method could be easily exported to other volcanic areas, where submerged volcanoes are monitored by networks of hydrophones and seismic sensors on land. The proposed approach allows indeed magnitude measurements of small magnitude earthquakes occurring at sea, thus adding useful information to the seismicity of these volcanoes.</jats:p>
      61  127
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The Permanent Monitoring System of the Campi Flegrei Caldera, Italy

    (Springer-Verlag GmbH Germany, 2022) ; ; ; ;
    We present the main features of the permanent monitoring system managed by the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Vesuviano in the Campi Flegrei caldera. Eruptive history of this active volcano shows that the majority of the eruptive events has been characterised by high explosivity and was accompanied by pyroclastic density currents. Its last eruption occurred in AD 1538 and in the next centuries the Campi Flegrei caldera has experienced several episodes of bradyseism and also the progressive increasing of the urbanisation in the area (west of Naples). Monitoring the dynamics of a mainly explosive volcano completely embedded in a very populated area is a challenging task. In order to detect any variation in the physical and chemical parameters of the Campi Flegrei caldera, the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Vesuviano manages a permanent multi-parametric monitoring system. All the recorded h24 continuous data are transmitted to the Monitoring Room of the Osservatorio Vesuviano in Naples, where they are acquired, processed and evaluated to define changes in the dynamical state of the volcano. The caldera, since the end of 2004, is experiencing a bradyseismic episode characterised by a low velocity rate uplift, low energy earthquakes and increasing in the magmatic components of fumarolic fluids. The monitoring and surveillance activity of the Campi Flegrei caldera plays a crucial role in the volcanic emergency plan that includes evacuation of approximately 500,000 people before the beginning of the eruption.
      220  30
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Il Monitoraggio dei Vulcani Campani - Secondo semestre 2019

    L'Istituto Nazionale di Geofisica e Vulcanologia (INGV) è componente del Servizio Nazionale di Protezione Civile, ex articolo 6 della legge 24 febbraio 1992 n. 225 ed è Centro di Competenza per i fenomeni sismici, vulcanici e i maremoti per il Dipartimento della Protezione Civile Nazionale (DPC). L’Osservatorio Vesuviano, Sezione di Napoli dell’INGV, ha nei suoi compiti il monitoraggio e la sorveglianza H24/7 delle aree vulcaniche attive campane (Vesuvio, Campi Flegrei e Ischia). Tali attività sono disciplinate dall’Accordo-Quadro (AQ) sottoscritto tra il DPC e l’INGV per il decennio 2012-2021 e sono dettagliate negli Allegati A e B del suddetto AQ. Il presente Rapporto sul Monitoraggio dei Vulcani Campani rappresenta l’attività svolta dall’Osservatorio Vesuviano e dalle altre Sezioni INGV impegnate nel monitoraggio dell’area vulcanica campana nel secondo semestre 2019.
      574  459
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Il Monitoraggio dei Vulcani Campani - Primo semestre 2019

    L'Istituto Nazionale di Geofisica e Vulcanologia (INGV) è componente del Servizio Nazionale di Protezione Civile, ex articolo 6 della legge 24 febbraio 1992 n. 225 ed è Centro di Competenza per i fenomeni sismici, vulcanici e i maremoti per il Dipartimento della Protezione Civile Nazionale (DPC). L’Osservatorio Vesuviano, Sezione di Napoli dell’INGV, ha nei suoi compiti il monitoraggio e la sorveglianza H24/7 delle aree vulcaniche attive campane (Vesuvio, Campi Flegrei e Ischia). Tali attività sono disciplinate dall’Accordo-Quadro (AQ) sottoscritto tra il DPC e l’INGV per il decennio 2012-2021 e sono dettagliate negli Allegati A e B del suddetto AQ. Il presente Rapporto sul Monitoraggio dei Vulcani Campani rappresenta l’attività svolta dall’Osservatorio Vesuviano e dalle altre Sezioni INGV impegnate nel monitoraggio dell’area vulcanica campana nel primo semestre 2019.
      607  445
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    When the Hydrophone Works as an Accelerometer

    We show the equivalence of earthquake-induced ground acceleration and water-pres- sure waveforms for the case of collocated hydrophones and seafloor seismometers installed in shallow water. In particular, the comparison of the waveforms and ampli- tude spectra of the acceleration and water-pressure signals confirms the existence of a frequency range of “forced oscillations” in which the water-pressure variations are pro- portional to the vertical component of the ground acceleration. We demonstrate the equivalence of the acceleration and water-pressure signals for a set of local earthquakes (epicenter distance of a few tens of kilometers) and regional earthquakes with a wide range of magnitude (2:7 < M w < 6:8), recorded by seismometers and hydrophones oper- ating in shallow water (depth less than 80 m) in the Campi Flegrei caldera (southern Italy). We describe the “forced oscillations” theory, and we demonstrate the signals equivalence in the frequency range 0.1–10 Hz, thus extending the frequency range of application of the hydrophones as accelerometers. The high correlation between the ground acceleration, derived from the ground velocity, and hydrophone pressure signals in the mentioned frequency range enables the use of the hydrophone wave- forms for standard seismological studies (i.e., earthquake source). The calibration of hydrophones by comparison with collocated accelerometers, or seismometers, is also enabled in a range of frequencies that is very difficult to reproduce in a laboratory. The results of our work also open the possibility of hydrophones being more exten- sively used in place of accelerometers in marine environments where accurate installa- tion of seismic sensors is difficult or unaffordable.
      451  8
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Four Years of Continuous Seafloor Displacement Measurements in the Campi Flegrei Caldera

    We present 4 years of continuous seafloor deformation measurements carried out in the Campi Flegrei caldera (Southern Italy), one of the most hazardous and populated volcanic areas in the world. The seafloor sector of the caldera has been monitored since early 2016 by the MEDUSA marine research infrastructure, consisting of four instrumented buoys installed where sea depth is less than 100 m. Each MEDUSA buoy is equipped with a cabled, seafloor module with geophysical and oceanographic sensors and a subaerial GPS station providing seafloor deformation and other environmental measures. Since April 2016, the GPS vertical displacements at the four buoys show a continuous uplift of the seafloor with cumulative measured uplift ranging between 8 and 20 cm. Despite the data being affected by environmental noise associated with sea and meteorological conditions, the horizontal GPS displacements on the buoys show a trend coherent with a radial deformation pattern. We use jointly the GPS horizontal and vertical velocities of seafloor and on-land deformations for modeling the volcanic source, finding that a spherical source fits best the GPS data. The geodetic data produced by MEDUSA has now been integrated with the data flow of other monitoring networks deployed on land at Campi Flegrei.
      553  61