Skip to main content
The search returned 6 results
Now showing 1 - 6 of 6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    BARRIER EFFECT IN CO2 CAPTURE AND STORAGE FEASIBILITY STUDY

    CO2 Capture & Storage (CCS) in saline aquifer is one of the most promising technologies for reducing anthropogenic emission of CO2. Feasibility studies for CO2 geo-sequestration in Italy have increased in the last few years. Before planning a CCS plant an appropriate precision and accuracy in the prediction of the reservoir evolution during injection, in terms of both geochemical calculation and fluid flow properties, is demanded. In this work a geochemical model will be presented for an offshore well in the Tyrrhenian Sea where the injection of 1.5 million ton/year of CO2 is planned. The dimension of the trapping structure requires to study an area of about 100 km2 and 4 km deep. Consequently, three different simulations were performed by means of TOUGHREACT code with Equation Of State module ECO2N. The first simulation is a stratigraphic column with a size of 110*110*4,000 meters and a metric resolution in the injection/cap-rock area (total of 8,470 elements), performed in order to asses the geochemical evolution of the cap-rock and to ensure the sealing of the system. The second simulation is at large scale in order to assess the CO2 path from the injection towards the spill point (total of about 154,000 elements). During this simulation, the effect of the full coupling of chemistry with fluid flow and a relevant effect in the expected CO2 diffusion velocity was recognized. Owing to the effect of chemical reaction and coupling terms (porosity/permeability variation with mineral dissolution/precipitation), the diffusion velocity results to be 20% slower than in a pure fluid flow simulation. In order to give a better picture of this 'barrier' effect, where the diffusion of the CO2-rich acidic water into the carbonate reservoir originates a complex precipitation/dissolution area, a small volume simulation with a 0.1 m grid was elapsed. This effect may potentially i) have a big impact on CO2 sequestration due to the reduction of available storage volume reached by the CO2 plume in 20 years and/or the enhanced injection pressure and ii) outline the relevance of a full geochemical simulation in an accurate prediction of the reservoir properties.
      224  360
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    RECONSTRUCTION OF POROSITY PROFILE OF AN OFF-SHORE DEEP WELL AND INPUT DATA FOR THE GEOCHEMICAL MODELING OF CO2 STORAGE IN A CARBONATE SALINE AQUIFER, IN ITALY.

    CO2 Capture & Storage (CCS) is presently one of the most promising technologies for reducing anthropogenic emissions of CO2. The numerical modeling procedures of geochemical processes are one of the few approaches for investigating the short-long-term consequences of CO2 storage into a deep reservoir. We present the results of a new approach for the reconstruction of thermo-physical properties of an off-shore deep well (situated in the medium Tyrrhenian Sea, only 5 miles from the coast, in the frame of a distensive and relatively high heat flux regime as a whole,with good outcrops, on-shore, of its stratigraphy includes six Late Triassic-Early Jurassic carbonatic formations at the depth of 2500-3700 m b.s.l). We used the well-log coupled with temperature profile and new mineralogical analyses of the outcrops geological formations, being the original core data lacking. This kind of procedure is new as a whole, and it is useful to create background petro-physical data, for reservoir engineering numerical simulations both of mass-transport and geochemical as well as geo-mechanical, in order to asses its general properties, without re-opening the well itself for industrial use, such as CO2 geological storage. The profile of thermal capacity and conductivity, as well as porosity and permeability resulted very well constrained and detailed for further numerical simulation uses. Porosity is a very important parameter for reservoir engineering, mainly for numerical simulations including geochemical modelling, being strongly necessary for CO2 geological storage feasibility studies, because it allows to compute: i) the reservoir storage capacity for each trapping mechanisms (some algorithms are discussed in the presentation) and ii) the water/rock ratio (one of the input parameter requested by the geochemical software codes). A common problem, working with closed wells with, available the well-log report only, is to obtain data on the thermo-physical properties of the rock. Usually the available well-log report the temperature profile measured during drilling, the mud-loss and some other information on water and gas phase presence. In this work we present a procedure that allow to estimate porosity and permeability of the rock formation from the well-log data joint with a rough mineralogical analyses of the corresponding geological formations outcrop with the use of a boundary condition such as shallow heat flow measurements; a similar approach were presented from some authors that dealt with similar problems e.g. Singh V.K., (2007). The analyses of the rock samples proceed by using i) petro-graphical analyses; ii) calcimetry with Dietrich-Fruhling apparatus in order to analyse the carbonate content of each sample; iii) XRD Rietveld analyses in order to quantify the major mineralogy of each sample and to apply the dolomite correction to the results of calcimetry determination. Rietveld quantification procedure were performed by using Maud v 2.2.; iv) SEM analyses have been accomplished later in details. Successively, hints about the subsequent geochemical modelling approach are presented. Chemical composition of the aquifer pore water has been has been inferred by batch modeling assuming thermodynamic equilibrium between minerals and a NaCl equivalent brine at reservoir conditions (up to 70 °C and 200 bar). Numerical simulations has been carried out by the PRHEEQC (V2.11) Software Package via corrections to the code default thermodynamic to obtain a more realistic modeling.
      170  216
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Atlante geochimico delle acque di Arezzo: dal dato di campagna alle mappe tematiche

    In this paper thematic maps produced on the basis of the principles of linear geostatistics are described in order to characterise the superficial and ground waters of the municipal territory of Arezzo. The aim is to assess the correlation with lithology, use of soil, drainage density and anthropogenic pressure and identify sensible areas to be periodically monitored in time. This study has used an original geochemical data-base consisting of about 500 water samples. A statistical approach has been used for the identification of anomalous values and homogenous populations. This step was followed by a detailed variographic study in order to analyse the spatial behaviour of the variables. Subsequently, an estimation procedure based on the application of ordinary kriging algorithm and sequential Gaussian simulation methods was applied to obtain the maps.
      179  297
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    RECONSTRUCTION OF POROSITY PROFILE IN AN OFFSHORE WELL

    (2008-09-22) ; ; ; ;
    Montegrossi, G.; CNR-IGG Firenze
    We presents the results of a new approach for the reconstruction of thermo-physical properties of deep well from the well log and mineralogical analisys of the outcrops formation. This kind of procedure are generally new, and they are useful for creating the background data for reservoir engeneers and geochemist for modelling a well in order to asses its properties prior of re-opening the well itself for industrial use, such as CO2 sequestration. We used the temperature profile obtained from the well log and the bulk mineralogy analysed from the corresponding formation outcrops. The profile of thermal capacity and conductivity, and porosity and permeability as well, result well constrained and detaile for further use.
      120  407
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Modellizzazione delle variazioni composizionali delle specie dell’azoto (NH4 +, NO2 -, NO3 -) nelle acque di falda del Comune di Arezzo (Toscana)♦

    Gli elementi chimici disciolti nelle acque continentali provengono dall’alterazione della crosta terrestre. L’acqua erode e dissolve i minerali delle rocce attraverso l’alterazione chimica avvalendosi del contributo dei gas presenti in atmosfera o nel sottosuolo. Il nitrato, una delle sostanze responsabili delle più gravi forme di inquinamento delle acque nei paesi in via di sviluppo, è un nutriente essenziale per la crescita delle piante e rappresenta un anello fondamentale del ciclo biogeochimico dell'azoto, in quanto viene prodotto dai batteri a partire dall'azoto atmosferico. In quantità eccessive il nitrato può essere dannoso per gli uomini e per gli animali. Elevati livelli di nitrato nell'acqua sono causati in larga misura dall'uso di fertilizzanti ricchi di nitrato e dal letame. In questo contesto, le condizioni redox delle acque naturali, che controllano la speciazione dei composti dell’azoto, sono altamente variabili perché controllate prevalentemente dall’attività biologica. In particolare, il bilancio fra i due processi dell’attività biologica, la fotosintesi e la respirazione (o decomposizione della sostanza organica), determina la presenza nel sistema di condizioni ossidanti o riducenti. I composti dell’azoto possono quindi essere considerati utili indicatori dello stato di salute di un acquifero superficiale. In questo lavoro sono analizzati i dati relativi ai tenori delle specie dell’azoto NH4 +, NO2 - e NO3 - relativi ad acque di falda campionate nell’area aretina nel corso della realizzazione dell’Atlante Geochimico delle Acque di Falda e di Scorrimento Superficiale del Comune di Arezzo. I dati sono analizzati proponendo nuove metodologie grafiche e numeriche per visualizzare lo stato del territorio nei confronti della pressione antropica come rilevata dal comportamento spaziale e temporale delle specie suddette.
      216  518
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A geochemical atlas of the ground- and running waters of Arezzo (Tuscany, Italy)

    Since 2000 a joint project between the Department of Earth Science of Florence and the Unit of Environment and Health of the Municipality of Arezzo has allowed to geochemically characterise the superficial and ground waters of the municipal territory of Arezzo in order to establish the water quality and to investigate the main natural and anthropic processes responsible of their composition. The available geochemical data-base consists of more than 500 samples sites (90% of which are private wells and 7 and 3% are springs and running waters, respectively) on which physical parameters (temperature and electrical conductivity) and major, minor and trace dissolved species (pH, Ca, Mg, Na, K, NH4, HCO3, SO4, NO3, NO2, Cl, Br, F, heavy metals) have been performed by using the same sampling procedure and analytical methodology in order to have a consistent set of data. Fifteen selected sites have been analysed twice per year to evidence possible seasonal effects. No significant differences have been recorded. The Arezzo Basin, formed since Upper Pliocene, is a structural depression limited to the North and to the East by the Pratomagno and Chianti belts, respectively, and to the South and to the East by two tectonic lineaments (Val d’Arbia-Val Marecchia transversal and Chitignano normal faults). Along these tectonic discontinuities CO2-rich manifestations either seep out or exploited by private companies. Hydrogeologically, three main aquifers are recognised: i) a relatively deep aquifer hosted in Tertiary sandstone formations; ii) an intermediate aquifer hosted in Quaternary fluvio-lacustrine sediments and iii) a shallow aquifer in recent alluvional sediments. The content in Total Dissolved Solids (TDS) allows to classify the Arezzo waters in: oligomineral (69%), medium-mineral (30%) and mineral (1%) and they can be regarded as Ca(Mg)-HCO3 (87 %), Na(K)-HCO3 (7%), Ca(Mg)-SO4 (5%) and Na(K)-Cl (1%). It is noteworthy to point of that the Na(K)-HCO3 waters are aligned along the above mentioned tectonic systems. The quality of Arezzo waters has been referred to the Italian legislation that is addressed to the definition of the Maximum Admissible Concentration (MAC, DPR 236/88, Dlgs 31/01) and the Reference Value (RV, DPR 236/88) in terms of waters for the human consumption. Waters from the northern area of Arezzo overcome MAC for chlorides, sulphates and sodium; if we consider nitrogen species (NH4, NO2, NO3) the values overcome CMA for those waters collected into the city, its peripheral areas and in the south-western suburbs. Thematic maps has been produced, on the basis of the principles of linear Geostatistics, in order to analyse the spatial behaviour of the analysed variables. The aim was to find correlations with lithology, use of the soils, drainage density, pressure of antrophic activities and so on, and to identify sensible areas to monitor in their time evolution. The investigation has been developed starting from a detailed variographic analysis by means of the geochemical behaviour of each variable has been analysed in the different directions of the space while the estimation procedure to obtain the maps has been based on the application of sequential Gaussian simulation procedures.
      184  127