Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
109 results
Filters
Settings
The search returned 109 results
Now showing 1 - 10 of 109
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Una nuova procedura per le correzioni atmosferiche: applicazione sulla Solfatara di Pozzuoli.
(2007-08-08); ; ; ; This paper describes CIRILLO, a new software for the correction of spaceborne images acquired in the VIS-SWIR spectral range. Moreover the capability to retrieve minerals composing the Solfatara di Pozzuoli surface using ASTER multispectral data is shown. In order to identify the mineralogical composition of the collected sample, mineralogy analysis (X-ray fluorescence and X-ray diffratometry) have been done. The reflectance spectra of the collected sample, obtained using a FieldSpec Pro spectrometer (INAF-LASF) has been compared with measurements performed directly on the Solftara di Pozzuoli using a portable ASD-Fieldspec spectrometer.461 37 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Historical and Instrumental Seismicity of the Sansepolcro Basin, Northern Apennines, Italy
(2008-09-07); ; ; ; In this work we analyse the most important earthquakes of the 20th century occurred in the Altotiberina Valley in 1917, 1918, 1919 and 1948; in particular instrumental relocation and Ms magnitude estimation are re-evaluated. The area investigated, the Sansepolcro basin, is characterized by the presence of important earthquakes in the past with estimated intensity even larger than IX MCS (the 1352 Monterchi earthquake, the 1389 Boccaserriola, the 1458 Citta' di Castello, the 1781 Cagliese and the 1917 Monterchi-Citerna earthquakes, CPTI Working Group, 2004) and by a surprisingly scarce instrumental seismicity compared to the adjacent areas struck by high seismicity (Castello et al., 2005; Ciaccio et al., 2006). In particular, the area north of Sansepolcro has been struck in recent years by four minor sequences, occurred between 1987 and 2001 with magnitude ranging from Ml3.0 to Mw4.7. The relocation of these earthquakes is particularly critical and in an important issue. An instrumental and precise location is critical for the complexity of the problems associated with the study of seismograms prior to the rst half of the twentieth century and is relevant because in the surrounding regions higher seismicity is observed. Regarding this peculiarity of the area, it’s very important to detect the localization of the historical earthquakes: in particular, the 1917 event is often associated to the possibility that the regional low angle Altotiberina Fault (Barchi et al., 1998) is able or not to nucleate large- or moderate-magnitude events, being historically located close to its surface (Boncio and Lavecchia, 2000).192 272 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , AlpArray-Italy: Site description and noise characterization
(2016-04-21); ; ; ; Within the framework of the European joint research initiative AlpArray (http://www.alparray.ethz.ch/), we de- ployed overall 20 seismic broad-band stations in Northern Italy and on two islands in the Tyrrhenian Sea (Capraia and Montecristo) during Fall-Winter 2015. All the stations, connected in real-time, were installed at sites selected according to the AlpArray Seismic Network plan: 16 temporary stations running for two to three years and 4 new permanent stations in sites already occupied by accelerometers of the INGV national network. Most temporary stations are equipped with REF TEK 130S digitizers and Nanometrics Trillium Compact 120s sensors (a couple have Nanometrics Trillium 120P and one Streckeisen STS2). For each site we describe the settings and discuss the noise levels, the site effects and the preliminary sensitivity analysis.326 135 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Erosion of the continental lithosphere at the cusps of the Calabrian arc: Evidence fromSreceiver functions analysis
(2011); ; ;Miller, M. S. ;Piana Agostinetti, N.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, ItaliaMediterranean tectonics has been characterized by an irregular, complex temporal evolution with episodic rollback and retreat of the subducted plate followed by period of slow trench-migration. To provide insight into the geodynamics of the Calabrian arc, we image the characteristics and lithospheric structure of the convergent, Apulian and Hyblean forelands at the cusps of the arc. Specifically we investigate the crustal and lithospheric thicknesses using teleseismic S-to-p converted phases, applied to the Adria-Africa plate margin for the first time. We find that the Moho in the Apulian foreland is nearly flat at ∼30 km depth, consistent with previous P receiver functions results, and that the Hyblean crustal thickness is more complex, which can be understood in terms of the nature of the individual pieces of carbonate platform and pelagic sediments that make up the Hyblean platform. The lithospheric thicknesses range between 70–120 km beneath Apulia and 70–90 km beneath Sicily. The lithosphere of the forelands at each end of the Calabrian arc are continental in nature, buoyant compared to the subducting oceanic lithosphere and have previously been interpreted as mostly undeformed carbonate platforms. Our receiver function images also show evidence of lithospheric erosion and thinning close to Mt. Etna and Mt. Vulture, two volcanoes which have been associated with asthenospheric upwelling and mantle flow around of the sides the slab. We suggest that as the continental lithosphere resists being subducted it is being thermo-mechanically modified by toroidal flow around the edges of the subducting oceanic lithosphere of the Calabrian arc.245 16 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Coastal structure, sea-level changes and vertical motion of the land in the Mediterranean
The Mediterranean basin is an important area of the Earth for studying the interplay between geodynamic processes and landscape evolution affected by tectonic, glacio-hydro-isostatic and eustatic factors. We focus on determining vertical deformations and relative sea-level change of the coastal zone utilizing geological, archaeological, historical and instrumental data, and modelling. For deformation determinations on recent decadal to centennial time scales, seismic strain analysis based on about 6000 focal mechanisms, surface deformation analysis based on some 850 continuous GPS stations, and 57 tide gauge records were used. Utilizing data from tectonically stable areas, reference surfaces were established to separate tectonic and climate (eustatic) signals throughout the basin for the last 20 000 years. Predominant Holocene subsidence (west coast of Italy, northern Adriatic sea, most of Greece and Turkey are areas at risk of flooding owing to relative sea-level rise), uplift (local areas in southwestern Italy and southern Greece) or stability (northwestern and central western Mediterranean and Levant area) were determined. Superimposed on the long trends, the coasts are also impacted by sudden extreme events such as recurring large storms and numerous, but unpredictable tsunamis caused by the high seismicity of parts of the basins.486 97 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , SEA LEVEL CHANGE ALONG THE TYRRHENIAN COAST FROM EARLY HOLOCENE TO THE PRESENT
(Accademia Nazionale dei Lincei, 2009-03-23); ; ; ;Lambeck, K.Antonioli, F.In any discussion of the evolution of a river basin, the history of sealevel change is important since river gradients and delta developments are strongly influenced by local sea level. Also, sea level provides a reference for inferring past vertical tectonic stability from the geological record. Hence it is appropriate that the discussion on the Tiber basin starts with sea level change along the Tyrrhenian coast during the Holocene. The past evidence for sea level comes from inferences of the position of the sea surface with respect to the present. Hence it is a relative measure; a function of both the changing position of the ocean surface and of the land surface or an integrated measure of changes in ocean volume, land movement and redistribution of water within the ocean basins. The observation therefore contains information on all the processes that change these surfaces: on geophysical, glaciological and oceanographic processes.151 209 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Siti archeologici costieri di età romana come indicatori delle variazioni del livello del mare: un'applicazione al mare Tirreno (Italia centrale)
(2003); ; ; ; Here we show first results from a multidisciplinary research which estimated sea level changes along the Tyrrhenian coastlines, using coastal archaeological sites.163 35 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismic Source Quantitative Parameters Retrieval From InSAR Data and Neural Networks
(2011); ; ; ; Stramondo, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, ItaliaThe basic idea of this paper relies on the concurrent exploitation of the capabilities of neural networks (NNs) and SAR interferometry (InSAR) for the characterization of a seismic source and the estimation of its geometric parameters. When a moderate-to-strong earthquake occurs, we can apply the InSAR technique to compute a differential interferogram. The earthquake is generated by an active seismogenic fault having its own specific geometry. The corresponding differential interferogram contains, in principle, information concerning the geometry of the seismic source that the earthquake comes from. To perform the inversion operation, a novel approach based on NNs is considered. This requires the generation of a statistically significant number of synthetic interferograms necessary for the network training phase. Each of them corresponds to a different combination of fault geometric parameters. After the training, the network is ready to perform, in real time, the inversion on new differential interferograms. This paper illustrates such a methodology and its validation on a set of experimental data.196 145 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Continuous gravity and tilt observations in an active geodynamic area of southern Italy: the Calabrian Arc system
(2015-03); ; ; ; Albano, A.; Università della CalabriaCalabria (southern Italy) is a site of considerable seismic activity related to the ongoing evolution of the Calabrian Arc system, where a complex lithospheric structure is present. For over a century the Calabrian region has been going through a period of relative seismic quietness, yet its seismic hazard is at the highest levels in the Mediterranean basin due to several catastrophic earthquakes present in the historical records. In order to strengthen the geophysical monitoring of this region, a gravity and tilt recording station was set up in the premises of the University of Calabria. The recorded signals should allow to estimate a tidal anomaly, possibly correlated with the difference between some local feature of the lithosphere or geodynamic activity and the corresponding characteristics of the model used to calculate the reference gravity tide. We report here on the results obtained by the analysis of more than two years of continuous gravity and tilt observations at a site in the northern part of the region. The tidal analysis of the gravity records, covering the time interval May 2011 - September 2013, has provided amplitudes, amplification factors and phases of the main lunar and solar gravity tidal waves. A reliable model of the gravity tide is necessary for accurate processing of discrete absolute and relative gravimetric measurements and to detect in the gravity signals possible components correlated to major seismic activity. The Ocean Tide Load (OTL) effect was accounted for in the determination of the tidal field spectral parameters. The most widespread DDW99/ NH Earth’s model, adopted here as reference, fits the obtained results well enough. The tidal residual vectors do not highlight any significant anomaly ascribable to the complex structure of the lithosphere beneath the region. The analysis of the tilt records points out a manifest influence of the fluctuations of the air temperature on ground slope, at annual and diurnal periods. The spectral analysis highlights the presence, on both E-W and N-S components, of a significant S1 solar wave. Values of the thermal admittance, at diurnal period, have been estimated for both tilt components. A weak energy at the frequency of 1.932 cycles/day, at the limit of statistical significance, is also observed, identifiable as the main semidiurnal lunar wave M2 of the crustal tide. The amplitude and the amplification factors of such a wave are consistent with the values expected by the DDW99/NH model. Beyond everything, the obtained results of the analyses of gravity and tilt records have provided models for the gravity tide and tidal field in the Calabrian region. Moreover, it turns out that the response of the complex lithospheric structure in the Calabrian Arc system to the tidal stress field does not produce any significant anomaly related to the adopted model. Moreover, the absolute measurements of the gravity acceleration, carried out in 1994 and 2013, yielded coinciding values, implying that during the time interval of 20 years not any significant vertical movement and/or mass redistribution in the underground occurred in the area, despite its intense geodynamic activity.266 214 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Montana Regional Seismic Network Perf ormance: an evaluation through SNES method
(2010-09-06); ; ;D'Alessandro, Antonino; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia ;Stickney, MichaelA properly organized seismic network is a valuable tool for monitoring seismic zones and evaluating seismic hazard. In this paper we analyze the location performance of the Montana Regional Seismic Network by SNES method (Seismic Network Evaluation through Simulation, D’Alessandro et al., 2010). This method permits us to construct, as a function of magnitude, hypocentral depth and confidence level, maps of the number of active stations in the location procedure and the relative azimuthal gaps and confidence intervals in hypocentral parameters regarding both the geometry of the seismic network and the use of an inadequate velocity model. The Montana Regional Seismograph Network is comprised of 38 stations deployed over an area of approximately 50,000 km2. Montana and immediately surrounding regions have a high level of seismicity that includes approximately 1500 locatable earthquakes annually, most of which occur along the Intermountain Seismic Belt and Centennial Tectonic Belt in the northern Rocky Mountains. Through application of the SNES method, we show that the M ontana Regional Seismic Network provides the best monitoring coverage in the Flathead Valley of northwestern M ontana and it provides a threshold of completeness down to magnitude 1.8 for most of western Montana. We delineate some seismogenic areas of western Montana, including the central portion of the Centennial Tectonic Belt in extreme southwestern Montana, that are not adequately covered by the existing network. The SNES technique provides guidance for optimal upgrades to the network to provide adequate monitoring coverage for the seismogenic parts of the Northern Rocky M ountains.111 253
