University of Granada, Spain
9 results
Filters
Settings
The search returned 9 results
Now showing 1 - 9 of 9
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , SEPARATION OF SCATTERING AND INTRINSIC ATTENUATION IN SOUTHERN SPAIN AND WESTERN ANATOLIA (TURKEY)
(1995-05); ; ; ;Akinci, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, ItaliaDel Pezzo, E.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, ItaliaWe have obtained a separation of intrinsic and scattering attenuation in two tectonically active areas of the Mediterranean Basin, southern Spain and western Anatolia, using the Multiple-Lapse Time Window Method. In southern Spain, Q(s) is predominant over Q(i) for frequencies lower than 4 Hz; between 4 and 8 Hz, results show similar scattering and intrinsic attenuation. For frequencies higher than 8 Hz, intrinsic attenuation is clearly dominant over scattering. L(e)(-1) does not change uniformly with frequency; it increases until 8 Hz and decreases at frequencies greater than 8 Hz. The integrated energy curves of western Anatolia do not show regular change with distance. For the first energy window (0-15 s), there is a clear increase of the energy with distances between 0 and 80 km, and then a decrease after 80 km. The fit of the experimental data in the full hypocentral distance range is not good. We divided the experimental energy curves into two different segments, 0-80 and 80-170 km. In 0-80 km, B-0 is close to 1 and the L(e)(-1) values are low (0.004-0.013). In the second distance range (80-170 km) intrinsic attenuation is predominant over scattering. Q(s)(-1) is more frequency-dependent than Q(i)(-1):f(-1.47) against f(-1.29). We observed that coda Q(-1) is equal to the observed Q(i)(-1) for intermediate frequencies, in both regions. However, Q(c)(-1) is really similar to Q(s)(-1) for short distances and is between Q(i) and Q(s) for long distances in southern Spain at low frequencies. Q(c) is similar to the observed Q(t) in both regions at high frequencies. The poor fit of the simulated curves with experimental data can be explained by introducing geometrical spreading values different to those used here. It is necessary to improve the model used by taking into account phenomena like non-isotropic scattering, variation of attenuation with depth, the presence of surface waves or a geometrical spreading value different to the theoretical one used.134 24 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , MEASUREMENTS OF INTRINSIC AND SCATTERING SEISMIC ATTENUATION IN THE CRUST
(1995-10); ; ; ; Intrinsic and scattering attenuation parameters, Q~ and Qs, have been measured in three different tectonic areas for local and shallow earthquakes located close to the receiver. The approach developed by Wennerberg (1993), which takes into account the numerical correction of the coda-Q parameter for the multiple scat- tering formulation of Zeng, was used to infer from the estimates of coda Q and direct S-wave Q the intrinsic (Qi) and scattering (Qs) Q values. Results for 1 to 12 Hz range show that Q~ is comparable to Qs for the Etna volcano and for the Campi Flegrei area, while Qi for the tectonically active area of Granada is lower than Qs. Coda Q is close to intrinsic Q, suggesting that, at least in the crust, coda Q is a good estimate of the intrinsic Q. Volcanic areas show a reasonable higher degree of heterogeneity, if compared with the nonvolcanic area of Granada.215 26 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , DEPTH-DEPENDENT SEISMIC ATTENUATION IN THE GRANADA ZONE (SOUTHERN SPAIN)
(1990-10); ; ; ; Coda-Q estimates for the Granada Basin (Southern Spain) are obtained by analyzing earthquakes occurring within or close to the borders of this area. The data set is composed of 54 earthquakes with local magnitudes ranging between 2.2 and 4.0 and with epicentral distances to the nearest station smaller than 10 km. A single-scattering process is assumed. Coda-Q values obtained show a clear dependence on frequency according to the relationship Q = Qof", where n ranges from 0.81 to 0.89. After removing the main site effects and discussing the possible multiple-scattering influence, the lapse-time dependence is interpreted as due to attenuation variations with depth. This result agrees with the variation of coda Q obtained by using different sets of events with increasing hypocentral depth ranges.189 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Seismovolcanic signals at Deception Island volcano,Antarctica: Wave field analysis and source modeling
(2000-06-10); ; ; ; Island (Antarctica), recorded during three Antarctic summers (1994- 1995, 1995-1996 and 1996-1997), are analyzed using a dense small-aperture (500 m) seismic array. The visual and spectral classification of the seismic events shows the existence of long-period and hybrid isolated seismic events, and of low-frequency, quasi-monochromatic and spasmodic continuous tremors, All spectra have the highest amplitudes in the frequency band between 1 and 4 Hz, while hybrids and spasmodic tremors have also significant amplitudes in the high-frequency band (4-10 Hz). The array analysis indicates that almost all the well-correlated low-frequency signals share similar array parameters (slowness and back azimuth) and have the same source area, close to the array site. The polarization analysis shows that phases at high-frequency are mostly composed of P waves, and those phases dominated by low frequencies can be interpreted as surface waves. No clear shear waves are evidenced. From the energy evaluation, we have found that the reduced displacement values for surface and body waves are confined in a narrow interval. Volcano-tectonic seismicity is located close to the array, at a depth shallower than 1 km. The wave-field properties of the seismovolcanic signals allow us to assume a unique source model, a shallow resonating fluid-filled crack system at a depth of some hundreds of meters. All of the seismic activity is interpreted as the response of a reasonably stable stationary geothermal process. The differences observed in the back azimuth between low and high frequencies are a near-field effect. A few episodes of the degassification process in an open conduit were observed and modeled with a simple organ pipe.244 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Intermediate-focus earthquakes under South Shetland Islands (Antarctica)
(1997); ; ; ; Intermediate-focus seismicity (50<H<100km) related to the underplating zone of the South Shetland plate have been recorded at a small aperture seismic array set up in Deception Island, Antarctica.188 22 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Observations of high-frequency scattered waves using dense arrays at Teide Volcano
(1997-12); ; ; ;Del Pezzo, E.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, ItaliaLa Rocca, M.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, ItaliaA study of the seismic coda of seven small earthquakes recorded on the Teide Volcano-Canary Islands (Spain) was carried out using a temporary, small- aperture, 12-station, seismic array. The purpose was to measure backazimuth, ap- parent velocity and the type of waves that compose the coda in the frequency range 4 to 6 Hz. We used the zero-lag cross-correlation (ZLC) method to obtain the com- ponents of the wave vector and three-component analysis techniques based on the covariance matrix of the signal in the time domain to investigate the polarization properties of the signals. The results show that a great part of the coda signals in the analyzed frequency range are almost uncorrelated, while a low number of isolated correlated arrivals show an apparent slowness between 2 × 10-3 and 2.5 × 10-4 sec/m and an almost random distribution of backazimuths. The correlated arrivals have been interpreted as generated by strong scatterers, probably related to the presence, in the study area, of surface topography irregularities (the volcanic cone and the caldera rim). The wave type varies waves with some Rayleigh components.139 32 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , VINEDA—Volcanic INfrasound Explosions Detector Algorithm
(2019-12-13); ; ; ; Infrasound is an increasingly popular tool for volcano monitoring, providing insights of the unrest by detecting and characterizing acoustic waves produced by volcanic processes, such as explosions, degassing, rockfalls, and lahars. Efficient event detection from large infrasound databases gathered in volcanic settings relies on the availability of robust and automated workflows. While numerous triggering algorithms for event detection have been proposed in the past, they mostly focus on applications to seismological data. Analyses of acoustic infrasound for signal detection is often performed manually or by application of the traditional short-term average/long-term average (STA/LTA) algorithms, which have shown limitations when applied in volcanic environments, or more generally to signals with poor signal-to-noise ratios. Here, we present a new algorithm specifically designed for automated detection of volcanic explosions from acoustic infrasound data streams. The algorithm is based on the characterization of the shape of the explosion signals, their duration, and frequency content. The algorithm combines noise reduction techniques with automatic feature extraction in order to allow confident detection of signals affected by non-stationary noise. We have benchmarked the performances of the new detector by comparison with both the STA/LTA algorithm and human analysts, with encouraging results. In this manuscript, we present our algorithm and make its software implementation available to other potential users. This algorithm has potential to either be implemented in near real-time monitoring workflows or to catalog pre-existing databases.314 147 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Array tracking of the volcanic tremor source at Deception Island Antarctica
(1997); ; ; ; We have found experimental evidence which shows that the volcanic tremor recorded at Deception Island (South Shetland Islands, Antarctica) is a superposition in time of overlapping hybrid events.175 25 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Sesame Project - Deliverable D01-02 - WP02: Controlled Instrumental Specifications - Final report of the Instrument Workshop 22-26 October 2001, University of Bergen, Norway
In the following we report the preliminary results from a workshop arranged at the Institute of Solid Earth Physics, University of Bergen, in the period 22-26 October 2001 in Bergen, Norway. The workshop was arranged under the framework of the SESAME Project (Site Effects Assessment Using Ambient Excitations, EC-RGD, Project No. EVG1-CT-2000-00026 SESAME), Task A (H/V technique), Work Package 02 (WP02 – Experimental conditions).219 712
