NEAR-REAL TIME 3D PROBABILISTIC EARTQUAKES LOCATIONS AT MT. ETNA VOLCANO REGION
Author(s)
Type
Poster session
Language
English
Status
Published
Journal
EGU
Date Issued
April 22, 2012
Conference Location
Vienna
Abstract
Automatic procedure for locating earthquake in quasi-real time must provide a good estimation of earthquakes
location within a few seconds after the event is first detected and is strongly needed for seismic warning system.
The reliability of an automatic location algorithm is in[U+FB02]uenced by several factors such as errors in
picking seismic phases, network geometry, and velocity model uncertainties.
On Mt. Etna, the seismic network is managed by INGV and the quasi-real time earthquakes locations are
performed by using an automatic-picking algorithm based on short-term-average to long-term-average ratios
(STA/LTA) calculated from an approximate squared envelope function of the seismogram, which furnish a list of
P-wave arrival times, and the location algorithm Hypoellipse, with a 1D velocity model.
The main purpose of this work is to investigate the performances of a different automatic procedure to improve the
quasi-real time earthquakes locations. In fact, as the automatic data processing may be affected by outliers (wrong
picks), the use of a traditional earthquake location techniques based on a least-square misfit function (L2-norm)
often yield unstable and unreliable solutions. Moreover, on Mt. Etna, the 1D model is often unable to represent the
complex structure of the volcano (in particular the strong lateral heterogeneities), whereas the increasing accuracy
in the 3D velocity models at Mt. Etna during recent years allows their use today in routine earthquake locations.
Therefore, we selected, as reference locations, all the events occurred on Mt. Etna in the last year (2011) which
was automatically detected and located by means of the Hypoellipse code.
By using this dataset (more than 300 events), we applied a nonlinear probabilistic earthquake location algorithm
using the Equal Differential Time (EDT) likelihood function, (Font et al., 2004; Lomax, 2005) which is much
more robust in the presence of outliers in the data. Successively, by using a probabilistic non linear method
(NonLinLoc, Lomax, 2001) and the 3D velocity model, derived from the one developed by Patanè et al. (2006)
integrated with that obtained by Chiarabba et al. (2004), we obtained the best possible constraint on the location
of the focii expressed as a probability density function (PDF) for the hypocenter location in 3D space.
As expected, the obtained results, compared with the reference ones, show that the NonLinLoc software (applied
to a 3D velocity model) is more reliable than the Hypoellipse code (applied to layered 1D velocity models),
leading to more reliable automatic locations also when outliers are present.
location within a few seconds after the event is first detected and is strongly needed for seismic warning system.
The reliability of an automatic location algorithm is in[U+FB02]uenced by several factors such as errors in
picking seismic phases, network geometry, and velocity model uncertainties.
On Mt. Etna, the seismic network is managed by INGV and the quasi-real time earthquakes locations are
performed by using an automatic-picking algorithm based on short-term-average to long-term-average ratios
(STA/LTA) calculated from an approximate squared envelope function of the seismogram, which furnish a list of
P-wave arrival times, and the location algorithm Hypoellipse, with a 1D velocity model.
The main purpose of this work is to investigate the performances of a different automatic procedure to improve the
quasi-real time earthquakes locations. In fact, as the automatic data processing may be affected by outliers (wrong
picks), the use of a traditional earthquake location techniques based on a least-square misfit function (L2-norm)
often yield unstable and unreliable solutions. Moreover, on Mt. Etna, the 1D model is often unable to represent the
complex structure of the volcano (in particular the strong lateral heterogeneities), whereas the increasing accuracy
in the 3D velocity models at Mt. Etna during recent years allows their use today in routine earthquake locations.
Therefore, we selected, as reference locations, all the events occurred on Mt. Etna in the last year (2011) which
was automatically detected and located by means of the Hypoellipse code.
By using this dataset (more than 300 events), we applied a nonlinear probabilistic earthquake location algorithm
using the Equal Differential Time (EDT) likelihood function, (Font et al., 2004; Lomax, 2005) which is much
more robust in the presence of outliers in the data. Successively, by using a probabilistic non linear method
(NonLinLoc, Lomax, 2001) and the 3D velocity model, derived from the one developed by Patanè et al. (2006)
integrated with that obtained by Chiarabba et al. (2004), we obtained the best possible constraint on the location
of the focii expressed as a probability density function (PDF) for the hypocenter location in 3D space.
As expected, the obtained results, compared with the reference ones, show that the NonLinLoc software (applied
to a 3D velocity model) is more reliable than the Hypoellipse code (applied to layered 1D velocity models),
leading to more reliable automatic locations also when outliers are present.
References
Chiarabba, C., De Gori, P., Patanè, D., 2004. The Mt. Etna plumbing system: The contribution of seismic
tomography. In Bonaccorso, A., Calvari, S., Coltelli, M., Del Negro, C., Falsaperla, S. (Eds.), Etna Volcano
Laboratory. Geophysical monograph series. AGU, pp. 191 - 204.
Font, Y., H. Kao, S. Lallemand, C.-S. Liu, and L.-Y. Chiao (2004). Hypocentral determination offshore
eastern Taiwan using the maximum intersection method, Geophys. J. Int. 158, 655–675.
Lomax, A. (2005). A reanalysis of the hypocentral location and related observations for the great 1906
California earthquake, Bull. Seismol. Soc. Am. 95, 861–877.
Lomax, A., J. Virieux, P. Volant, and C. Thierry-Berge (2000). Probabilistic earthquake location in 3D and
layered models, in Advances in Seismic Event Location, C. H. Thurber and N. Rabinowitz (Editors), Kluwer
Academic Publishers, Dordrecht/Boston/London, 101–134.
Patanè, D., G. Barberi, O. Cocina, P. De Gori, and C. Chiarabba (2006). Time-Resolved Seismic Tomography
Detects Magma Intrusions at Mount Etna, Science 313, 821-823.
tomography. In Bonaccorso, A., Calvari, S., Coltelli, M., Del Negro, C., Falsaperla, S. (Eds.), Etna Volcano
Laboratory. Geophysical monograph series. AGU, pp. 191 - 204.
Font, Y., H. Kao, S. Lallemand, C.-S. Liu, and L.-Y. Chiao (2004). Hypocentral determination offshore
eastern Taiwan using the maximum intersection method, Geophys. J. Int. 158, 655–675.
Lomax, A. (2005). A reanalysis of the hypocentral location and related observations for the great 1906
California earthquake, Bull. Seismol. Soc. Am. 95, 861–877.
Lomax, A., J. Virieux, P. Volant, and C. Thierry-Berge (2000). Probabilistic earthquake location in 3D and
layered models, in Advances in Seismic Event Location, C. H. Thurber and N. Rabinowitz (Editors), Kluwer
Academic Publishers, Dordrecht/Boston/London, 101–134.
Patanè, D., G. Barberi, O. Cocina, P. De Gori, and C. Chiarabba (2006). Time-Resolved Seismic Tomography
Detects Magma Intrusions at Mount Etna, Science 313, 821-823.
File(s)![]()
Name
Barberi et al..pdf
Size
2.63 MB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
8af0eea71f8e206edfc5b11681a52d91
