Earthquake fracture energy inferred from kinematic rupture models on extended faults
Language
English
Obiettivo Specifico
3.1. Fisica dei terremoti
Status
Published
JCR Journal
JCR Journal
Peer review journal
Yes
Journal
Issue/vol(year)
/110 (2005)
Publisher
American Geophysical Union
Pages (printed)
B12303
Date Issued
2005
Abstract
We estimate fracture energy on extended faults for several recent earthquakes by
retrieving dynamic traction evolution at each point on the fault plane from slip history
imaged by inverting ground motion waveforms. We define the breakdown work (Wb) as
the excess of work over some minimum traction level achieved during slip. Wb is
equivalent to "seismological" fracture energy (G) in previous investigations. Our
numerical approach uses slip velocity as a boundary condition on the fault. We employ a
three-dimensional finite difference algorithm to compute the dynamic traction evolution in
the time domain during the earthquake rupture. We estimate Wb by calculating the scalar
product between dynamic traction and slip velocity vectors. This approach does not
require specifying a constitutive law and assuming dynamic traction to be collinear with
slip velocity. If these vectors are not collinear, the inferred breakdown work depends on
the initial traction level. We show that breakdown work depends on the square of slip. The
spatial distribution of breakdown work in a single earthquake is strongly correlated
with the slip distribution. Breakdown work density and its integral over the fault,
breakdown energy, scale with seismic moment according to a power law (with exponent
0.59 and 1.18, respectively). Our estimates of breakdown work range between 4e+5 and
2e+7 J/m2 for earthquakes having moment magnitudes between 5.6 and 7.2. We also
compare our inferred values with geologic surface energies. This comparison might
suggest that breakdown work for large earthquakes goes primarily into heat production.
retrieving dynamic traction evolution at each point on the fault plane from slip history
imaged by inverting ground motion waveforms. We define the breakdown work (Wb) as
the excess of work over some minimum traction level achieved during slip. Wb is
equivalent to "seismological" fracture energy (G) in previous investigations. Our
numerical approach uses slip velocity as a boundary condition on the fault. We employ a
three-dimensional finite difference algorithm to compute the dynamic traction evolution in
the time domain during the earthquake rupture. We estimate Wb by calculating the scalar
product between dynamic traction and slip velocity vectors. This approach does not
require specifying a constitutive law and assuming dynamic traction to be collinear with
slip velocity. If these vectors are not collinear, the inferred breakdown work depends on
the initial traction level. We show that breakdown work depends on the square of slip. The
spatial distribution of breakdown work in a single earthquake is strongly correlated
with the slip distribution. Breakdown work density and its integral over the fault,
breakdown energy, scale with seismic moment according to a power law (with exponent
0.59 and 1.18, respectively). Our estimates of breakdown work range between 4e+5 and
2e+7 J/m2 for earthquakes having moment magnitudes between 5.6 and 7.2. We also
compare our inferred values with geologic surface energies. This comparison might
suggest that breakdown work for large earthquakes goes primarily into heat production.
References
Andrews, D. J. (1976), Rupture propagation with finite stress in antiplane
strain, J. Geophys. Res., 81, 3575– 3582.
Andrews, D. J. (1999), Test of two methods for faulting in finite-difference
calculations, Bull. Seismol. Soc. Am., 89, 931–937.
Andrews, D. J. (2005), Rupture dynamics with energy loss outside the slip
zone, J. Geophys. Res., 110, B01307, doi:10.1029/2004JB003191.
Archuleta, R. J. (1984), A faulting model for the 1979 Imperial Valley
earthquake, J. Geophys. Res., 89, 4559– 4585.
Beroza, G. C., and P. Spudich (1988), Linearized inversion for fault rupture
behavior; application to the 1984 Morgan Hill, California, earthquake,
J. Geophys. Res., 93, 6275–6296.
Bizzarri, A., and M. Cocco (2003), Slip-weakening behavior during the
propagation of dynamic ruptures obeying rate- and state-dependent friction
laws, J. Geophys. Res., 108(B8), 2373, doi:10.1029/2002JB002198.
Bouchon, M. (1997), The state of stress on some faults of the San Andreas
system as inferred from near-field strong motion data, J. Geophys. Res.,
102, 1731–1744.
Chester, F., and J. Chester (1998), Ultracataclasite structure and friction
processes of the Punchbowl fault, San Andreas system, California,
Tectonophysics, 295, 199– 221.
Chester, J. S., F. M. Chester, and A. K. Kronenberg (2005), Fracture surface
energy of the Punchbowl Fault, San Andreas system, Nature, 437, 133–
136.
Dalguer, L. A., K. Irikura, W. Zhang, and J. D. Riera (2002), Distribution of
dynamic and static stress changes during 2000 Tottori (Japan) earthquake:
Brief interpretation of the earthquake sequences; Foreshocks, mainshock
and aftershocks, Geophys. Res. Lett., 29(16), 1758, doi:10.1029/
2001GL014333.
Day, S. M., G. Yu, and D. J. Wald (1998), Dynamic stress changes during
earthquake rupture, Bull. Seismol. Soc. Am., 88, 512– 522.
Favreau, P., and R. J. Archuleta (2003), Direct seismic energy modeling and
application to the 1979 Imperial Valley earthquake, Geophys. Res. Lett.,
30(5), 1198, doi:10.1029/2002GL015968.
Fukuyama, E., and R. Madariaga (1998), Rupture dynamics of a planar
fault in a 3-D elastic medium: Rate- and slip-weakening friction, Bull.
Seismol. Soc. Am., 88, 1 –17.
Guatteri, M., and P. Spudich (2000), What can strong-motion data tell us
about slip-weakening fault-friction laws?, Bull. Seismol. Soc. Am., 90,
98– 116.
Guatteri, M., P. Spudich, and G. Beroza (2001), Inferring rate and state
friction parameters from a rupture model of the 1995 Hygo-ken Nanbu
(Kobe) Japan earthquake, J. Geophys. Res., 106, 26,511 – 26,521.
Hartzell, S. H., and T. H. Heaton (1983), Inversion of strong ground motion
and teleseismic waveform data for the fault rupture history of the 1979
Imperial Valley, California, earthquake, Bull. Seismol. Soc. Am., 73,
1553– 1583.
Hernandez, B., F. Cotton, and M. Campillo (1999), Contribution of radar
interferometry to a two-step inversion of the kinematic process of the
1992 Landers earthquake, J. Geophys. Res., 104, 13,083– 13,099.
Hernandez, B.,M. Cocco, F. Cotton, S. Stramondo, O. Scotti, F. Courboulex,
and M. Campillo (2004), Rupture history of the 1997 Umbria Marche
(central Italy) main shocks from the inversion of GPS, DinSAR and near
field strong motion data, Ann. Geophys., 47, 1355–1376.
Husseini, M. I., B. J. Dushan, M. J. Randall, and L. B. Freund (1975), On
the fracture energy, Geophys. J. R. Astron. Soc., 43, 367– 385.
Ida, Y. (1972), Cohesive force across the tip of a longitudinal-shear
crack and Griffith’s specific surface energy, J. Geophys. Res., 77,
3796– 3805.
Ide, S. (2003), On fracture surface energy of natural earthquakes from
viewpoint of seismic observations, Bull. Earthquake Res. Inst., 78, 1–
120.
Ide, S., and M. Takeo (1997), Determination of constitutive relations of
fault slip based on seismic wave analysis, J. Geophys. Res., 102, 27,379–
27,391.
Lavalle´e, D., and R. J. Archuleta (2003), Stochastic modeling of slip spatial
complexities for the 1979 Imperial Valley, California, earthquake, Geophys.
Res. Lett., 30(5), 1245, doi:10.1029/2002GL015839.
Mai, P. M., and G. C. Beroza (2002), A spatial random field model to
characterize complexity in earthquake slip, J. Geophys. Res., 107(B11),
2308, doi:10.1029/2001JB000588.
Mikumo, T., and T. Miyatake (1995), Heterogeneous distribution of
dynamic stress drop and relative fault strength recovered from the results
of wave-form inversion–the 1984 Morgan-Hill, California earthquake,
Bull. Seismol. Soc. Am., 85, 178–193.
Mikumo, T., K. B. Olsen, E. Fukuyama, and Y. Yagi (2003), Stress-breakdown
time and slip-weakening distance inferred from slip-velocity functions
on earthquake faults, Bull. Seismol. Soc. Am., 93, 264– 282.
Nielsen, S., and R. Madariaga (2003), On the self-healing fracture mode,
Bull. Seismol. Soc. Am., 93, 2375–2388.
Olgaard, D. L., and W. F. Brace (1983), The microstructure of gouge from a
mining-induced seismic shear zone, Int. J. Rock Mech. Min. Sci. Geomech.
Abstr., 20, 11 – 19.
Peyrat, S., K. Olsen, and R. Madariaga (2001), Dynamic modeling of the
1992 Landers earthquake, J. Geophys. Res., 106, 26,467– 26,482.
Piatanesi, A., E. Tinti, M. Cocco, and E. Fukuyama (2004), The dependence
of traction evolution on the earthquake source time function
adopted in kinematic rupture models, Geophys. Res. Lett., 31, L04609,
doi:10.1029/2003GL019225.
Pulido, N., and K. Irikura (2000), Estimation of dynamic rupture parameters
from the radiated seismic energy and apparent stress, Geophys. Res. Lett.,
27, 3945– 3948.
Quin, H. (1990), Dynamic stress drop and rupture dynamics of the October
15, 1979 Imperial Valley, California, earthquake, Tectonophysics, 175,
93– 117.
Rice, J. R., C. G. Sammis, and R. Parsons (2005), Off-fault secondary
failure induced by a dynamic slip-pulse, Bull. Seismol. Soc. Am., 95,
109– 134.
Sibson, R. H. (2003), Thickness of seismic slip zone, Bull. Seismol. Soc.
Am., 93, 1169–1178.
Spudich, P. (1992), On the inference of absolute stress levels from seismic
radiation, Tectonophysics, 211, 99–106.
Spudich, P., and M. Guatteri (2004), The effect of bandwidth limitations on
the inference of earthquake slip-weakening distance from seismograms,
Bull. Seismol. Soc. Am., 94, 2028– 2036.
Spudich, P., M. Guatteri, K. Otsuki, and J. Minagawa (1998), Use of fault
striations and dislocation models to infer tectonic shear stress during the
1995 Hyogo-ken Nanbu (Kobe) earthquake, Bull. Seismol. Soc. Am., 88,
413–427.
Wald, D. J. (1996), Slip history of the 1995 Kobe, Japan, earthquake
determined from strong motion, teleseismic, and geodetic data, J. Phys.
Earth, 44(5), 489– 503.
Wald, D. J., and T. H. Heaton (1994), Spatial and temporal distribution of
slip for the 1992 Landers, California, earthquake, Bull. Seismol. Soc. Am.,
84, 668–691.
Wald, D. J., T. H. Heaton, and K. W. Hudnut (1996), The slip history of the
1994 Northridge, California, earthquake determined from strong-motion,teleseismic, GPS, and leveling data, Bull. Seismol. Soc. Am., 86, Part B
Suppl., 49– 70.
Wilson, B., T. Dewers, Z. Reches, and J. N. Brune (2005), Particle size
and energetics of gouge from earthquake rupture zones, Nature, 434,
749– 752.
Zhang, W., T. Iwata, K. Irikura, H. Sekiguchi, and M. Bouchon (2003),
Heterogeneous distribution of the dynamic source parameters of the 1999
Chi-Chi, Taiwan, earthquake, J. Geophys. Res., 108(B5), 2232,
doi:10.1029/2002JB001889.
strain, J. Geophys. Res., 81, 3575– 3582.
Andrews, D. J. (1999), Test of two methods for faulting in finite-difference
calculations, Bull. Seismol. Soc. Am., 89, 931–937.
Andrews, D. J. (2005), Rupture dynamics with energy loss outside the slip
zone, J. Geophys. Res., 110, B01307, doi:10.1029/2004JB003191.
Archuleta, R. J. (1984), A faulting model for the 1979 Imperial Valley
earthquake, J. Geophys. Res., 89, 4559– 4585.
Beroza, G. C., and P. Spudich (1988), Linearized inversion for fault rupture
behavior; application to the 1984 Morgan Hill, California, earthquake,
J. Geophys. Res., 93, 6275–6296.
Bizzarri, A., and M. Cocco (2003), Slip-weakening behavior during the
propagation of dynamic ruptures obeying rate- and state-dependent friction
laws, J. Geophys. Res., 108(B8), 2373, doi:10.1029/2002JB002198.
Bouchon, M. (1997), The state of stress on some faults of the San Andreas
system as inferred from near-field strong motion data, J. Geophys. Res.,
102, 1731–1744.
Chester, F., and J. Chester (1998), Ultracataclasite structure and friction
processes of the Punchbowl fault, San Andreas system, California,
Tectonophysics, 295, 199– 221.
Chester, J. S., F. M. Chester, and A. K. Kronenberg (2005), Fracture surface
energy of the Punchbowl Fault, San Andreas system, Nature, 437, 133–
136.
Dalguer, L. A., K. Irikura, W. Zhang, and J. D. Riera (2002), Distribution of
dynamic and static stress changes during 2000 Tottori (Japan) earthquake:
Brief interpretation of the earthquake sequences; Foreshocks, mainshock
and aftershocks, Geophys. Res. Lett., 29(16), 1758, doi:10.1029/
2001GL014333.
Day, S. M., G. Yu, and D. J. Wald (1998), Dynamic stress changes during
earthquake rupture, Bull. Seismol. Soc. Am., 88, 512– 522.
Favreau, P., and R. J. Archuleta (2003), Direct seismic energy modeling and
application to the 1979 Imperial Valley earthquake, Geophys. Res. Lett.,
30(5), 1198, doi:10.1029/2002GL015968.
Fukuyama, E., and R. Madariaga (1998), Rupture dynamics of a planar
fault in a 3-D elastic medium: Rate- and slip-weakening friction, Bull.
Seismol. Soc. Am., 88, 1 –17.
Guatteri, M., and P. Spudich (2000), What can strong-motion data tell us
about slip-weakening fault-friction laws?, Bull. Seismol. Soc. Am., 90,
98– 116.
Guatteri, M., P. Spudich, and G. Beroza (2001), Inferring rate and state
friction parameters from a rupture model of the 1995 Hygo-ken Nanbu
(Kobe) Japan earthquake, J. Geophys. Res., 106, 26,511 – 26,521.
Hartzell, S. H., and T. H. Heaton (1983), Inversion of strong ground motion
and teleseismic waveform data for the fault rupture history of the 1979
Imperial Valley, California, earthquake, Bull. Seismol. Soc. Am., 73,
1553– 1583.
Hernandez, B., F. Cotton, and M. Campillo (1999), Contribution of radar
interferometry to a two-step inversion of the kinematic process of the
1992 Landers earthquake, J. Geophys. Res., 104, 13,083– 13,099.
Hernandez, B.,M. Cocco, F. Cotton, S. Stramondo, O. Scotti, F. Courboulex,
and M. Campillo (2004), Rupture history of the 1997 Umbria Marche
(central Italy) main shocks from the inversion of GPS, DinSAR and near
field strong motion data, Ann. Geophys., 47, 1355–1376.
Husseini, M. I., B. J. Dushan, M. J. Randall, and L. B. Freund (1975), On
the fracture energy, Geophys. J. R. Astron. Soc., 43, 367– 385.
Ida, Y. (1972), Cohesive force across the tip of a longitudinal-shear
crack and Griffith’s specific surface energy, J. Geophys. Res., 77,
3796– 3805.
Ide, S. (2003), On fracture surface energy of natural earthquakes from
viewpoint of seismic observations, Bull. Earthquake Res. Inst., 78, 1–
120.
Ide, S., and M. Takeo (1997), Determination of constitutive relations of
fault slip based on seismic wave analysis, J. Geophys. Res., 102, 27,379–
27,391.
Lavalle´e, D., and R. J. Archuleta (2003), Stochastic modeling of slip spatial
complexities for the 1979 Imperial Valley, California, earthquake, Geophys.
Res. Lett., 30(5), 1245, doi:10.1029/2002GL015839.
Mai, P. M., and G. C. Beroza (2002), A spatial random field model to
characterize complexity in earthquake slip, J. Geophys. Res., 107(B11),
2308, doi:10.1029/2001JB000588.
Mikumo, T., and T. Miyatake (1995), Heterogeneous distribution of
dynamic stress drop and relative fault strength recovered from the results
of wave-form inversion–the 1984 Morgan-Hill, California earthquake,
Bull. Seismol. Soc. Am., 85, 178–193.
Mikumo, T., K. B. Olsen, E. Fukuyama, and Y. Yagi (2003), Stress-breakdown
time and slip-weakening distance inferred from slip-velocity functions
on earthquake faults, Bull. Seismol. Soc. Am., 93, 264– 282.
Nielsen, S., and R. Madariaga (2003), On the self-healing fracture mode,
Bull. Seismol. Soc. Am., 93, 2375–2388.
Olgaard, D. L., and W. F. Brace (1983), The microstructure of gouge from a
mining-induced seismic shear zone, Int. J. Rock Mech. Min. Sci. Geomech.
Abstr., 20, 11 – 19.
Peyrat, S., K. Olsen, and R. Madariaga (2001), Dynamic modeling of the
1992 Landers earthquake, J. Geophys. Res., 106, 26,467– 26,482.
Piatanesi, A., E. Tinti, M. Cocco, and E. Fukuyama (2004), The dependence
of traction evolution on the earthquake source time function
adopted in kinematic rupture models, Geophys. Res. Lett., 31, L04609,
doi:10.1029/2003GL019225.
Pulido, N., and K. Irikura (2000), Estimation of dynamic rupture parameters
from the radiated seismic energy and apparent stress, Geophys. Res. Lett.,
27, 3945– 3948.
Quin, H. (1990), Dynamic stress drop and rupture dynamics of the October
15, 1979 Imperial Valley, California, earthquake, Tectonophysics, 175,
93– 117.
Rice, J. R., C. G. Sammis, and R. Parsons (2005), Off-fault secondary
failure induced by a dynamic slip-pulse, Bull. Seismol. Soc. Am., 95,
109– 134.
Sibson, R. H. (2003), Thickness of seismic slip zone, Bull. Seismol. Soc.
Am., 93, 1169–1178.
Spudich, P. (1992), On the inference of absolute stress levels from seismic
radiation, Tectonophysics, 211, 99–106.
Spudich, P., and M. Guatteri (2004), The effect of bandwidth limitations on
the inference of earthquake slip-weakening distance from seismograms,
Bull. Seismol. Soc. Am., 94, 2028– 2036.
Spudich, P., M. Guatteri, K. Otsuki, and J. Minagawa (1998), Use of fault
striations and dislocation models to infer tectonic shear stress during the
1995 Hyogo-ken Nanbu (Kobe) earthquake, Bull. Seismol. Soc. Am., 88,
413–427.
Wald, D. J. (1996), Slip history of the 1995 Kobe, Japan, earthquake
determined from strong motion, teleseismic, and geodetic data, J. Phys.
Earth, 44(5), 489– 503.
Wald, D. J., and T. H. Heaton (1994), Spatial and temporal distribution of
slip for the 1992 Landers, California, earthquake, Bull. Seismol. Soc. Am.,
84, 668–691.
Wald, D. J., T. H. Heaton, and K. W. Hudnut (1996), The slip history of the
1994 Northridge, California, earthquake determined from strong-motion,teleseismic, GPS, and leveling data, Bull. Seismol. Soc. Am., 86, Part B
Suppl., 49– 70.
Wilson, B., T. Dewers, Z. Reches, and J. N. Brune (2005), Particle size
and energetics of gouge from earthquake rupture zones, Nature, 434,
749– 752.
Zhang, W., T. Iwata, K. Irikura, H. Sekiguchi, and M. Bouchon (2003),
Heterogeneous distribution of the dynamic source parameters of the 1999
Chi-Chi, Taiwan, earthquake, J. Geophys. Res., 108(B5), 2232,
doi:10.1029/2002JB001889.
Type
article
File(s)![]()
Name
JGRTinti2005.pdf
Description
Published paper
Size
9.09 MB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
4f488e30991451c74c8a972a92682d3c
