Submillimeter Accuracy of InSAR Time Series: Experimental Validation
Language
English
Obiettivo Specifico
5IT. Osservazioni satellitari
Status
Published
JCR Journal
JCR Journal
Peer review journal
Yes
Issue/vol(year)
/45 (2007)
Pages (printed)
1142-1153
Date Issued
2007
Abstract
This paper presents the results of a blind experiment
that is performed using two pairs of dihedral reflectors. The
aim of the experiment was to demonstrate that interferometric
synthetic aperture radar (InSAR) measurements can indeed allow
a displacement time series estimation with submillimeter accuracy
(both in horizontal and vertical directions), provided that the
data are properly processed and the impact of in situ as well as
atmospheric effects is minimized. One pair of dihedral reflectors
was moved a few millimeters between SAR acquisitions, in the
vertical and east–west (EW) directions, and the ground truth was
compared with the InSAR data. The experiment was designed to
allow a multiplatform and multigeometry analysis, i.e., each re-
flector was carefully pointed in order to be visible in both Envisat
and Radarsat acquisitions. Moreover, two pairs of reflectors were
used to allow the combination of data gathered along ascending
and descending orbits. The standard deviation of the error is 0.75
mm in the vertical direction and 0.58 mm in the horizontal (EW)
direction. GPS data were also collected during this experiment in
order to cross-check the SAR results.
that is performed using two pairs of dihedral reflectors. The
aim of the experiment was to demonstrate that interferometric
synthetic aperture radar (InSAR) measurements can indeed allow
a displacement time series estimation with submillimeter accuracy
(both in horizontal and vertical directions), provided that the
data are properly processed and the impact of in situ as well as
atmospheric effects is minimized. One pair of dihedral reflectors
was moved a few millimeters between SAR acquisitions, in the
vertical and east–west (EW) directions, and the ground truth was
compared with the InSAR data. The experiment was designed to
allow a multiplatform and multigeometry analysis, i.e., each re-
flector was carefully pointed in order to be visible in both Envisat
and Radarsat acquisitions. Moreover, two pairs of reflectors were
used to allow the combination of data gathered along ascending
and descending orbits. The standard deviation of the error is 0.75
mm in the vertical direction and 0.58 mm in the horizontal (EW)
direction. GPS data were also collected during this experiment in
order to cross-check the SAR results.
Type
article
File(s)![]()
Name
[27]_CESI_GPS-SAR_2007.pdf
Size
596.49 KB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
7876cbb0736b8396c0baad822912566c
