Determining the optimal Bouguer density for a gravity data set: implications for the isostatic setting of the Mediterranean Sea
Author(s)
Language
English
Status
Published
JCR Journal
JCR Journal
Peer review journal
Yes
Issue/vol(year)
/169 (2007)
Publisher
Blackwell
Pages (printed)
380-388
Date Issued
2007
Abstract
We have used free-air gravity satellite data from GEOSAT and ERS-1 missions to compile a
Bouguer gravity map of the Mediterranean Sea. The complete Bouguer correction has been
applied by using the method of Parker, that acts in the Fourier domain and permits the exact
evaluation of the gravity contribution from an highly sampled topographic model of the land.
The density used for the Bouguer reduction has been obtained from the gravity data set itself,
by using two different optimization methods that have given the same optimal result of
2400 kgm−3. We have studied the radial power spectrum of the data, choosing the optimal
Bouguer density from its slope, as the one which minimizes the fractal dimension of the resulting
gravity map. The second approach consists of studying the correlation between topography
and Bouguer anomaly by spatial cross-plots for a significant subset of the data. Both these approaches
are aimed at reducing the short-wavelength effects of topography in the gravity map,
but in the past they have been traditionally used alternatively since they gave different optimization
values, especially the second method that seems to ignore large-wavelength isostatic
effects. Actually, we have revisited both the methodologies, proposing slight modifications to
make their efforts compatible. Their coincident results confirmtheir validity of application and
give reliability to the recovered value of the Bouguer optimal density. Moreover, modifying the
second approach allows us to compile a sort of normalized correlation map, which we propose
in this paper, defining the 2-D isostatic setting of the investigated region without introducing
any further lithospheric model. The final result is a revised Bouguer map compiled using a
grid with a resolution of 2 min, that is useful for large-scale geological studies and gives important
information about the compensation mechanism of the Mediterranean Sea: in a direct
way we have found that the overall region seems to be in a complete isostatic equilibrium
apart from the young basins of Tyrrhenian Sea and Aegean Sea, confirming previous similar
results.
Bouguer gravity map of the Mediterranean Sea. The complete Bouguer correction has been
applied by using the method of Parker, that acts in the Fourier domain and permits the exact
evaluation of the gravity contribution from an highly sampled topographic model of the land.
The density used for the Bouguer reduction has been obtained from the gravity data set itself,
by using two different optimization methods that have given the same optimal result of
2400 kgm−3. We have studied the radial power spectrum of the data, choosing the optimal
Bouguer density from its slope, as the one which minimizes the fractal dimension of the resulting
gravity map. The second approach consists of studying the correlation between topography
and Bouguer anomaly by spatial cross-plots for a significant subset of the data. Both these approaches
are aimed at reducing the short-wavelength effects of topography in the gravity map,
but in the past they have been traditionally used alternatively since they gave different optimization
values, especially the second method that seems to ignore large-wavelength isostatic
effects. Actually, we have revisited both the methodologies, proposing slight modifications to
make their efforts compatible. Their coincident results confirmtheir validity of application and
give reliability to the recovered value of the Bouguer optimal density. Moreover, modifying the
second approach allows us to compile a sort of normalized correlation map, which we propose
in this paper, defining the 2-D isostatic setting of the investigated region without introducing
any further lithospheric model. The final result is a revised Bouguer map compiled using a
grid with a resolution of 2 min, that is useful for large-scale geological studies and gives important
information about the compensation mechanism of the Mediterranean Sea: in a direct
way we have found that the overall region seems to be in a complete isostatic equilibrium
apart from the young basins of Tyrrhenian Sea and Aegean Sea, confirming previous similar
results.
References
Andersen, O.B. & Knudsen, P., 1998. Global marine gravity fields from the
ERS-1 and GEOSAT geodetic mission altimetry, J. geophys. Res., 103,
8129–8137.
Balmino, G., 2003. Gravity field recovery form GRACE: unique aspects of
the high precision inter-satellite data and analysis method, Sp. Sc. rev. 108,
47–54.
Berhend,D., Denker, H.&Schmidt, K., 1996. Digital gravity data sets for the
Mediterranean Sea derived from available maps, Bull. d. Inf., 78, 32–41.
Carminati, E.,Wortel, M.J.R., Meijer, P.T h. & Sabadini, R., 1998. The twostage
opening of the western-central Mediterranean basins: a forward
modeling test to a new evolutionary model, Earth planet. Sci. Lett., 160,
667–679.
Chapin, D.A., 1996. A deterministic approach toward isostatic gravity
residuals—a case study from South America, Geophysics, 4, 1022–1033.
Consiglio Nazionale delle Ricerche, 1992. Structural model of Italy and
gravity map, Progetto Finalizzato Geodinamica. Quaderni de ‘La Ricerca
Scientifica’, 114, (9 sheets), CNR.
Della Vedova, B., Bellani, S., Pellis, G. & Squarci, P., 2001. Deep temperatures
and surface heat flow distribution, in Anatomy of an Orogen: The
Apennines and Adjacent Mediterranean Basin, pp. 65–76, eds Vai, G.B.
& Martini, I.P., Kluwer Academic, Dordrecht.
Fairhead, J.D.&Odegard, M.E., 2002. Advances in gravity survey resolution,
The Leading Edge, 21, 36–37.
Forsyth,D.W., 1985. Subsurface loading and estimates of the flexural rigidity
of continental lithosphere, J. geophys. Res., 90, 12 623–12 632.
Gregotski, M.E., Jensen, O. & Arkani-Hamed, J., 1991. Fractal stochastic
modeling of aeromagnetic data, Geophysics, 56, 1706–1715.
Hayford, J.F. & Bowie, W., 1912. The effect of topography and isostatic
compensation upon the intensity of gravity, U.S. Coast Geod. Surv. Spec.
Publ., 10.
Hinze, W.J., 2003. Bouguer reduction density, why 2.67?, Geophysics, 68,
1559–1560.
Hoernle, K., Zhang, Y. & Grabham, D., 1995. Seismic and geochemical
evidence for large-scale mantle upwelling beneath the eastern Atlantic
and Western Europe, Nature, 374, 34–38.
Jackson, J.&McKenzie,D., 1988. Rates of active deformation in the Aegean
Sea and surrounding areas, Basin Res., 3, 121–128.
Karner, G.D. & Watts, A.B., 1983. Gravity anomalies and flexure of the
lithosphere at mountain ranges, J. geophys. Res., 88, 10 449–10 477.
Knudsen, P. & Brovelli, M., 1993. Collinear and cross-over adjustment of
Geosat ERM and Seasat altimeter data in the Mediterranean Sea, Surv.
Geophys. 14, 449–459.
Le Pichon, X.&Angelier J., 1979. The Hellenic arc and trench system: a key
to the neotectonic evolution of the eastern Mediterranean area Tectonophysics,
60, 1–42.
Makris, J., Morelli, C. & Zanolla, C., 1998. The Bouguer gravity map of the
Mediterranean Sea (IBCM-G), Boll. Geof. Teo. Appl., 39, 79–98.
Malinverno, A. & Ryan, W.B.F., 1986. Extension in the Tyrrhenian Sea and
shortening in the Apennines as a result of arc migration driven by sinking
of lithisphere, Tectonics, 5, 227–245.
Mandelbrot, B.B., 1967. How long is the coast of Britain? Statistical selfsimilarity
and fractional dimensions, Science 156, 636–638.
Maus, S. & Dimri, V.P., 1994. Scaling properties of potential fields due to
scaling sources, Geophys. Res. Lett., 21, 891–894.
McKenzie, D.&Fairhead, J.D., 1976. Estimates of the effective elastic thickness
of the continental lithosphere from Bouguer and free air gravity
anomalies, J. geophys. Res., 102, 27 523–27 552.
Nettleton, L.L., 1939. Determination of density for reduction of gravimeter
observations, Geophysics, 4, 176–183.
Parker, R.L., 1972. The rapid calculation of potential Anomalies, Geophys.
J. R. astr. Soc., 31, 447–455.
Parker, R.L., 1977. Understanding inverse theory, Annu. Rev. Earth planet.
Sci., 5, 35–64.
Pilkington, M. & Todoeschuck, J.P., 1993. Fractal magnetization of continental
crust, Geophys. Res. Lett., 20, 627–630.
Royden, L., 1988. Flexural Behaviour of the Continental lithosphere in Italy:
constraints imposed by gravity and deflection data, J. geophys. Res., 93,
7747–7766.
Sandwell, D.T. & Smith, W.H.F., 1997. Marine Gravity anomaly from
GEOSAT and ERS-1 satellite altimetry, J. geophys. Res., 102, 10 039–
10 054.
Sartori, R., Torelli, L., Zitellini, N., Carrara, G., Magaldi, M. & Mussoni, P.,
2004. Crustal features along a W-E Tyrrhenian transect from Sardinia to
Campanian margins (Central Mediterranean), Tectonophysics, 383, 171–
192.
Seber, D., Sandvol, E., Sandvol, C., Brindisi, C. & Barazangi, M., 2001.
Crustal model for the Middle East and North Africa region: implications
for the isostatic compensation mechanism, Geophys. J. Int., 147, 630–
638.
Simons, F.J., Zuber, M.T. & Korenaga, J., 2000. Isostatic response of
the Australian lithosphere: estimation of the effective elastic thickness
and anisotropy using multitaper spectral analysis, J. geophys. Res., 105,
19 163–19 184.
Simpson, R.W., Jachens, R.C., Blakely, R.J. & Saltus, R.W., 1986. A new
isostatic residual gravity map of the conterminous United States with a
discussion on the significance of isostatic residual anomalies, J. geophys.
Res., 91, 8348–8372.
Thorarinsson, F. & Magnusson, S.G., 1990. Bouguer density determination
by fractal analysis, Geophysics, 7, 932–935.
Turcotte, D.L., 1997. Fractals and Chaos in Geology and Geophysics, Cambridge
University Press, New York.
Vannucci, G., Pondrelli, S., Argnani, A., Morelli, A., Gasperini, P.&Boschi,
E., 2004. An atlas of Mediterranean seismicity, Ann. Geoph., 47 247–
306.
Yale, M., Sandwell, D.T. & Herring, A., 1998. What are the Limitations of
Satellite Altimetry?, The Leading Edge, 17, 73–76.
ERS-1 and GEOSAT geodetic mission altimetry, J. geophys. Res., 103,
8129–8137.
Balmino, G., 2003. Gravity field recovery form GRACE: unique aspects of
the high precision inter-satellite data and analysis method, Sp. Sc. rev. 108,
47–54.
Berhend,D., Denker, H.&Schmidt, K., 1996. Digital gravity data sets for the
Mediterranean Sea derived from available maps, Bull. d. Inf., 78, 32–41.
Carminati, E.,Wortel, M.J.R., Meijer, P.T h. & Sabadini, R., 1998. The twostage
opening of the western-central Mediterranean basins: a forward
modeling test to a new evolutionary model, Earth planet. Sci. Lett., 160,
667–679.
Chapin, D.A., 1996. A deterministic approach toward isostatic gravity
residuals—a case study from South America, Geophysics, 4, 1022–1033.
Consiglio Nazionale delle Ricerche, 1992. Structural model of Italy and
gravity map, Progetto Finalizzato Geodinamica. Quaderni de ‘La Ricerca
Scientifica’, 114, (9 sheets), CNR.
Della Vedova, B., Bellani, S., Pellis, G. & Squarci, P., 2001. Deep temperatures
and surface heat flow distribution, in Anatomy of an Orogen: The
Apennines and Adjacent Mediterranean Basin, pp. 65–76, eds Vai, G.B.
& Martini, I.P., Kluwer Academic, Dordrecht.
Fairhead, J.D.&Odegard, M.E., 2002. Advances in gravity survey resolution,
The Leading Edge, 21, 36–37.
Forsyth,D.W., 1985. Subsurface loading and estimates of the flexural rigidity
of continental lithosphere, J. geophys. Res., 90, 12 623–12 632.
Gregotski, M.E., Jensen, O. & Arkani-Hamed, J., 1991. Fractal stochastic
modeling of aeromagnetic data, Geophysics, 56, 1706–1715.
Hayford, J.F. & Bowie, W., 1912. The effect of topography and isostatic
compensation upon the intensity of gravity, U.S. Coast Geod. Surv. Spec.
Publ., 10.
Hinze, W.J., 2003. Bouguer reduction density, why 2.67?, Geophysics, 68,
1559–1560.
Hoernle, K., Zhang, Y. & Grabham, D., 1995. Seismic and geochemical
evidence for large-scale mantle upwelling beneath the eastern Atlantic
and Western Europe, Nature, 374, 34–38.
Jackson, J.&McKenzie,D., 1988. Rates of active deformation in the Aegean
Sea and surrounding areas, Basin Res., 3, 121–128.
Karner, G.D. & Watts, A.B., 1983. Gravity anomalies and flexure of the
lithosphere at mountain ranges, J. geophys. Res., 88, 10 449–10 477.
Knudsen, P. & Brovelli, M., 1993. Collinear and cross-over adjustment of
Geosat ERM and Seasat altimeter data in the Mediterranean Sea, Surv.
Geophys. 14, 449–459.
Le Pichon, X.&Angelier J., 1979. The Hellenic arc and trench system: a key
to the neotectonic evolution of the eastern Mediterranean area Tectonophysics,
60, 1–42.
Makris, J., Morelli, C. & Zanolla, C., 1998. The Bouguer gravity map of the
Mediterranean Sea (IBCM-G), Boll. Geof. Teo. Appl., 39, 79–98.
Malinverno, A. & Ryan, W.B.F., 1986. Extension in the Tyrrhenian Sea and
shortening in the Apennines as a result of arc migration driven by sinking
of lithisphere, Tectonics, 5, 227–245.
Mandelbrot, B.B., 1967. How long is the coast of Britain? Statistical selfsimilarity
and fractional dimensions, Science 156, 636–638.
Maus, S. & Dimri, V.P., 1994. Scaling properties of potential fields due to
scaling sources, Geophys. Res. Lett., 21, 891–894.
McKenzie, D.&Fairhead, J.D., 1976. Estimates of the effective elastic thickness
of the continental lithosphere from Bouguer and free air gravity
anomalies, J. geophys. Res., 102, 27 523–27 552.
Nettleton, L.L., 1939. Determination of density for reduction of gravimeter
observations, Geophysics, 4, 176–183.
Parker, R.L., 1972. The rapid calculation of potential Anomalies, Geophys.
J. R. astr. Soc., 31, 447–455.
Parker, R.L., 1977. Understanding inverse theory, Annu. Rev. Earth planet.
Sci., 5, 35–64.
Pilkington, M. & Todoeschuck, J.P., 1993. Fractal magnetization of continental
crust, Geophys. Res. Lett., 20, 627–630.
Royden, L., 1988. Flexural Behaviour of the Continental lithosphere in Italy:
constraints imposed by gravity and deflection data, J. geophys. Res., 93,
7747–7766.
Sandwell, D.T. & Smith, W.H.F., 1997. Marine Gravity anomaly from
GEOSAT and ERS-1 satellite altimetry, J. geophys. Res., 102, 10 039–
10 054.
Sartori, R., Torelli, L., Zitellini, N., Carrara, G., Magaldi, M. & Mussoni, P.,
2004. Crustal features along a W-E Tyrrhenian transect from Sardinia to
Campanian margins (Central Mediterranean), Tectonophysics, 383, 171–
192.
Seber, D., Sandvol, E., Sandvol, C., Brindisi, C. & Barazangi, M., 2001.
Crustal model for the Middle East and North Africa region: implications
for the isostatic compensation mechanism, Geophys. J. Int., 147, 630–
638.
Simons, F.J., Zuber, M.T. & Korenaga, J., 2000. Isostatic response of
the Australian lithosphere: estimation of the effective elastic thickness
and anisotropy using multitaper spectral analysis, J. geophys. Res., 105,
19 163–19 184.
Simpson, R.W., Jachens, R.C., Blakely, R.J. & Saltus, R.W., 1986. A new
isostatic residual gravity map of the conterminous United States with a
discussion on the significance of isostatic residual anomalies, J. geophys.
Res., 91, 8348–8372.
Thorarinsson, F. & Magnusson, S.G., 1990. Bouguer density determination
by fractal analysis, Geophysics, 7, 932–935.
Turcotte, D.L., 1997. Fractals and Chaos in Geology and Geophysics, Cambridge
University Press, New York.
Vannucci, G., Pondrelli, S., Argnani, A., Morelli, A., Gasperini, P.&Boschi,
E., 2004. An atlas of Mediterranean seismicity, Ann. Geoph., 47 247–
306.
Yale, M., Sandwell, D.T. & Herring, A., 1998. What are the Limitations of
Satellite Altimetry?, The Leading Edge, 17, 73–76.
Type
article
File(s)![]()
Name
medgravmap.pdf
Size
611.52 KB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
81e76b320774d6df15d58000766fe0ba
