Skip to main content
The search returned 7 results
Now showing 1 - 7 of 7
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A novel multiple-expert protocol to manage uncertainty and subjective choices in probabilistic single and multi-hazard risk analyses

    Integrating diverse expert opinions in hazard and risk projects is essential to managing subjective decisions and quantifying uncertainty to produce stable and trustworthy results. A structured procedure is necessary to organize the gathering of experts' opinions while ensuring transparency, accountability, and independence in judgements. We propose a novel Multiple-Expert management Protocol (MEP) to address this challenge, providing procedural guidelines for conducting single to multi-hazard risk analyses. MEP establishes a workflow to manage subjectivity rooted in (i) moderated and staged group interactions, (ii) trackable blind advice through written elicitations with mathematical aggregation, (iii) participatory independent review, (iv) close cooperation between scientific and managerial coordination, and (v) proper and comprehensive documentation. Originally developed for stress testing critical infrastructure, MEP is designed as a single, flexible, technology-neutral procedural workflow applicable to various sectors. Moreover, its scalability allows it to adapt from high to low-budget projects and from complex probabilistic multi-hazard risk assessments to standard single-hazard analyses, with different experts' degree and type of involvement depending on available funding and emerging controversies. We present two compelling case studies to showcase MEP's practical applicability: a multi-hazard risk analysis for a port infrastructure and a single-hazard regional tsunami hazard assessment.
      7  164
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Making of the NEAM Tsunami Hazard Model 2018 (NEAMTHM18)

    The NEAM Tsunami Hazard Model 2018 (NEAMTHM18) is a probabilistic hazard model for tsunamis generated by earthquakes. It covers the coastlines of the North-eastern Atlantic, the Mediterranean, and connected seas (NEAM). NEAMTHM18 was designed as a three-phase project. The first two phases were dedicated to the model development and hazard calculations, following a formalized decision-making process based on a multiple-expert protocol. The third phase was dedicated to documentation and dissemination. The hazard assessment workflow was structured in Steps and Levels. There are four Steps: Step-1) probabilistic earthquake model; Step-2) tsunami generation and modeling in deep water; Step-3) shoaling and inundation; Step-4) hazard aggregation and uncertainty quantification. Each Step includes a different number of Levels. Level-0 always describes the input data; the other Levels describe the intermediate results needed to proceed from one Step to another. Alternative datasets and models were considered in the implementation. The epistemic hazard uncertainty was quantified through an ensemble modeling technique accounting for alternative models’ weights and yielding a distribution of hazard curves represented by the mean and various percentiles. Hazard curves were calculated at 2,343 Points of Interest (POI) distributed at an average spacing of ∼20 km. Precalculated probability maps for five maximum inundation heights (MIH) and hazard intensity maps for five average return periods (ARP) were produced from hazard curves. In the entire NEAM Region, MIHs of several meters are rare but not impossible. Considering a 2% probability of exceedance in 50 years (ARP≈2,475 years), the POIs with MIH >5 m are fewer than 1% and are all in the Mediterranean on Libya, Egypt, Cyprus, and Greece coasts. In the North-East Atlantic, POIs with MIH >3 m are on the coasts of Mauritania and Gulf of Cadiz. Overall, 30% of the POIs have MIH >1 m. NEAMTHM18 results and documentation are available through the TSUMAPS-NEAM project website (http://www.tsumaps-neam.eu/), featuring an interactive web mapper. Although the NEAMTHM18 cannot substitute in-depth analyses at local scales, it represents the first action to start local and more detailed hazard and risk assessments and contributes to designing evacuation maps for tsunami early warning.
      1499  281
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Effect of Shallow Slip Amplification Uncertainty on Probabilistic Tsunami Hazard Analysis in Subduction Zones: Use of Long-Term Balanced Stochastic Slip Models

    The complexity of coseismic slip distributions influences the tsunami hazard posed by local and, to a certain extent, distant tsunami sources. Large slip concentrated in shallow patches was observed in recent tsunamigenic earthquakes, possibly due to dynamic amplification near the free surface, variable frictional conditions or other factors. We propose a method for incorporating enhanced shallow slip for subduction earthquakes while preventing systematic slip excess at shallow depths over one or more seismic cycles. The method uses the classic k−2 stochastic slip distributions, augmented by shallow slip amplification. It is necessary for deep events with lower slip to occur more often than shallow ones with amplified slip to balance the long-term cumulative slip. We evaluate the impact of this approach on tsunami hazard in the central and eastern Mediterranean Sea adopting a realistic 3D geometry for three subduction zones, by using it to model ~ 150,000 earthquakes with 𝑀𝑤 from 6.0 to 9.0. We combine earthquake rates, depth-dependent slip distributions, tsunami modeling, and epistemic uncertainty through an ensemble modeling technique. We found that the mean hazard curves obtained with our method show enhanced probabilities for larger inundation heights as compared to the curves derived from depth-independent slip distributions. Our approach is completely general and can be applied to any subduction zone in the world.
      1142  149
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    NEAMTHM18 Documentation: the making of the TSUMAPS-NEAM Tsunami Hazard Model 2018

    The NEAM Tsunami Hazard Model 2018 (NEAMTHM18) is a probabilistic hazard model for tsunamis generated by earthquakes. It covers the coastlines of the North-East Atlantic, the Mediterranean, and connected Seas (NEAM). In this online data product, the hazard results are provided by hazard curves calculated at 2,343 Points of Interest (POI), distributed in the North-East Atlantic (1,076 POIs), the Mediterranean Sea (1,130 POIs), and the Black Sea (137 POIs) at an average spacing of ~20 km. For each POI, hazard curves are given for the mean, 2nd, 16th, 50th, 84th, and 98th percentiles. Maps derived from hazard curves are Probability maps for Maximum Inundation Heights (MIH) of 1, 2, 5, 10, 20 meters; Hazard maps for Average Return Periods (ARP) of 500, 1,000, 2,500, 5,000, 10,000 years. For each map, precalculated displays are provided for the mean, the 16th percentile, and the 84th percentile. All data are also made accessible through an interactive web mapper and through Open Geospatial Consortium standard protocols. The model was prepared in the framework of the European Project TSUMAPS-NEAM (http://www.tsumaps-neam.eu/) funded by the mechanism of the European Civil Protection and Humanitarian Aid Operations (grant no. ECHO/SUB/2015/718568/PREV26).
      382  614
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A New Approximate Method for Quantifying Tsunami Maximum Inundation Height Probability

    Regional and global tsunami hazard analysis requires simplified and efficient methods for estimating the tsunami inundation height and its related uncertainty. One such approach is the amplification factor (AF) method. Amplification factors describe the relation between offshore wave height and the maximum inundation height, as predicted by linearized plane wave models employed for incident waves with different wave characteristics. In this study, a new amplification factor method is developed that takes into account the offshore bathymetry proximal to the coastal site. The present AFs cover the North-Eastern Atlantic and Mediterranean (NEAM) region. The model is the first general approximate model that quantifies inundation height uncertainty. Uncertainty quantification is carried out by analyzing the inundation height variability in more than 500 high-resolution inundation simulations at six different coastal sites. The inundation simulations are undertaken with different earthquake sources in order to produce different wave period and polarity. We show that the probability density of the maximum inundation height can be modeled with a log-normal distribution, whose median is quite well predicted by the AF. It is further demonstrated that the associated maximum inundation height uncertainties are significant and must be accounted for in tsunami hazard analysis. The application to the recently developed TSUMAPS-NEAM probabilistic tsunami hazard analysis (PTHA) is presented as a use case.
      378  2
  • Some of the metrics are blocked by your 
    Item type:Product, Access status: Open Access ,
      159  456
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Fast evaluation of tsunami scenarios: uncertainty assessment for a Mediterranean Sea database

    We present a database of pre-calculated tsunami waveforms for the entire Mediterranean Sea, obtained by numerical propagation of uniformly spaced Gaussian-shaped elementary sources for the sea level elevation. Based on any initial sea surface displacement, the database allows the fast calculation of full waveforms at the 50 m isobath offshore of coastal sites of interest by linear superposition. A computationally inexpensive procedure is set to estimate the coefficients for the linear superposition based on the potential energy of the initial elevation field. The elementary sources size and spacing is fine enough to satisfactorily reproduce the effects of M> = 6.0 earthquakes. Tsunami propagation is modelled by using the Tsunami-HySEA code, a GPU finite volume solver for the non-linear shallow water equations. Like other existing methods based on the initial sea level elevation, the database is independent on the faulting geometry and mechanism, which makes it applicable in any tectonic environment. We model a large set of synthetic tsunami test scenarios, selected to explore the uncertainty introduced when approximating tsunami waveforms and their maxima by fast and simplified linear combination. This is the first time to our knowledge that the uncertainty associated to such a procedure is systematically analysed and that relatively small earthquakes are considered, which may be relevant in the near-field of the source in a complex tectonic setting. We find that non-linearity of tsunami evolution affects the reconstruction of the waveforms and of their maxima by introducing an almost unbiased (centred at zero) error distribution of relatively modest extent. The uncertainty introduced by our approximation can be in principle propagated to forecast results. The resulting product then is suitable for different applications such as probabilistic tsunami hazard analysis, tsunami source inversions and tsunami warning systems.
      744  313