Skip to main content
The search returned 5 results
Now showing 1 - 5 of 5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    ML scale in Northwestern Turkey from 1999 Izmit aftershock: updates

    Abstract We present an update of the local magnitude scale previously calibrated for northwestern Turkey by Baumbach et al. (2003). The path coverage in the westernmost part of the analyzed area has been increased, as well as the number of amplitudes for distance greater than 110 km. Furthermore, a set of recordings from accelerometric stations operated by the Kandilli Observatory and Earthquake Research Institute (KOERI) has been merged with the recordings by the Sapanca-Bolu and German Task Force seismological networks. In all, 4047 recordings from 528 earthquakes recorded by 31 seismometers and 23 accelerometers are considered to calibrate the local magnitude scale over a hypocentral distance range from 10 to 190 km. By analyzing the unit covariance matrix and the resolution matrix, we show how the source-to-station geometries of the seismic and strong-motion networks affect the uncertainties of the computed station corrections, attenuation coefficients, and magnitudes. The assumptions made concerning the reference station correction, and the change in the amplification for the Wood–Anderson torsion seismograph from 2800 to 2080 (Uhrhammer and Collins, 1990) introduced an offset of about 0.34 in the magnitudes with respect to Baumbach et al. (2003), with the updated local magnitude scale ranges from 0.50 to 5.91. The distribution of the residuals with distance confirms that the extension of both the magnitude and distance ranges and the improved path coverage have preserved the high quality that characterized the data set analyzed by Baumbach et al. (2003).
      122  242
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Source parameters and seismic moment-magnitude scaling for Northwestern Turkey

    Abstract The source parameters of 523 aftershocks (0.5 ML 5.9) of the 1999 Kocaeli earthquake are determined by performing a two-step spectral fitting procedure. The source spectrum, corrected for both site and propagation effects, is described in terms of a standard x-square model multiplied by an exponential term of frequency. The latter term is introduced to estimate the high-frequency (f 12 Hz) fall-off of the acceleration source spectra by computing the j parameter. The seismic moments obtained range between 1.05 1014 and 2.41 1017 N m, whereas the Brune stress drops are between 0.002 and 40 MPa. The j value varies between 0.00 and 0.08 sec, indicating a decay of the acceleration level at the higher frequency part of the spectrum greater than that assumed by the x 2 model. Both the stress drop and the j parameter show the tendency of increasing with aftershock magnitude. No evidence of self-similarity breakdown is observed between the source radius and M0. Finally, both the seismic moment and the moment magnitude are compared with the local magnitude to derive new moment–magnitude relationships for the area.
      135  435
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Empirical ground-motion prediction equations for Northwestern Turkey using the aftershocks of the 1999 Kocaeli earthquake

    We present ground motion models for northwestern Turkey using the aftershocks of the Mw 7.4, 1999 Kocaeli earthquake. We consider 4047 velocity and acceleration records for each component of motion, from 528 earthquakes recorded by stations belonging to regional networks. The ground motion models obtained provide peak ground velocity, peak ground acceleration, and spectral accelerations for 8 different frequencies between 1 and 10 Hz. The analysis of the error distribution shows that the record-to-record component of variance is the largest contribution to the standard deviation of the calibrated ground- motion models. Furthermore, a clear dependence of inter-event error on stress drop is observed. The empirical ground-motion prediction equations, derived for both the larger horizontal and vertical components, are valid in the local magnitude range from 0.5 to 5.9, and for hypocentral distances up to 190 km. Citation: Bindi, D., S. Parolai, H. Grosser, C. Milkereit, and E. Durukal (2007), Empirical ground-motion prediction equations for northwestern Turkey using the aftershocks of the 1999 Kocaeli earthquake,
      143  463
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Crustal attenuation characteristics in northwestern Turkey in the range from 1 to 10 Hz

    We have analyzed the aftershocks (ML 4.5) following the 1999 Izmit earthquake (Mw 7.4) to infer the frequency-dependent attenuation characteristics of both P and S waves, in the frequency range from 1 to 10 Hz and in the distance range from 10 to 140 km. A linear-predictive model is assumed to describe the spectral amplitudes in terms of attenuation and source contributions. The results show that both P and S waves undergo a strong attenuation along ray paths shorter than 40 km, while the secondary arrivals significantly contribute to the spectral amplitudes over the distance range from 40 to 60 km, as also confirmed by the computation of synthetic seismograms. For longer ray paths, the decrease in attenuation suggests an increase in the propagation efficiency with depth. Finally, the spectral attenuation curves are flattened, or sloped upward at low frequencies in the range from 100 to 140 km, due to the contemporary arrivals of direct waves and postcritical reflections from the Moho. In terms of geometrical spreading and anelastic attenuation, the attenuation in the range from 10 to 40 km is well described by a spreading coefficient n 1 for both P and S waves, and the quality factors can be approximated by QS( f ) 17f 0.80 for 1 f 10 Hz and QP( f ) 56f 0.25 for 2.5 f 10 Hz. For ray paths in the range from 60 to 80 km, the attenuation weakens but the interaction between seismic waves and propagation medium is more complex. The multilapse time window analysis (MLTWA) is applied to quantify the amount of scattering loss and intrinsic absorption for S waves. The seismic albedo B0 decreases from 0.5 at 1 Hz to 0.3 at 10 Hz, while the total quality factor QT increases from about 56 to 408. The multiple lapse time-window analysis (MLTWA) results provide only an average estimate of the attenuation properties in the range from 10 to 80 km. In fact, by neglecting the variation of attenuation with depth, the MLTWA results underestimate attenuation for distances less than 40 km, and do not capture the significant features caused by the integrated energy of the secondary arrivals observed in the range from 40 to 60 km.
      185  30
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Cumulative attenuation along source to receiver paths in northwestern Turkey

    The attenuation of shear waves propagating in the crust of northwestern Turkey has been investigated in the frequency range 1–10 Hz. A standard spectral inversion scheme is applied to a data set of 245 aftershocks (ML 4.5) of the 1999 Izmit earthquake. The obtained attenuation-with-distance curves have been described in terms of the t* cumulative attenuation parameter and its dependence on frequency and distance investigated. At 1 Hz, Q 1, evaluated by normalizing t* to the travel time, is generally larger than 0.025 for source-to-station distances smaller than 40 km, indicating the presence of a highly attenuating upper crust in the area. Over longer distances, Q 1 decreases, suggesting a decrease in the attenuation with depth. By contrast, the normalized t* computed for earthquakes recorded at stations having almost the same distance from the sources do not show a strong dependence on the backazimuth. These results suggest that the decrease of Q 1 with depth is more significant than its lateral variations. Regarding its frequency dependence, Q 1 almost linearly decreases with frequency. Finally, the near-surface-attenuation parameter k is evaluated at 12 stations and the results discussed in terms of site, event, and propagation contributions. The event contribution is not negligible and shows a significant positive correlation with magnitude. The site term is smaller than 0.020 sec for rock or topographic sites, while it assumes values of 0.036 sec and 0.042 sec for two stations installed over thick soft sedimentary layers.
      144  19