Skip to main content
The search returned 4 results
Now showing 1 - 4 of 4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Hydrothermal genesis and growth of the banded agates from the Allumiere-Tolfa volcanic district (Latium, Italy)

    In this work, we studied the hydrothermal agates from the Neogene–Quaternary volcanic district of Allumiere-Tolfa, northwest of Rome (Latium, Italy) using a combination of micro-textural, spectroscopic, and geochemical data. The examined sample consists of (1) an outer cristobalite layer deposited during the early stages of growth, (2) a sequence of chalcedonic bands (including i.e., length-fast, zebraic, and minor length-slow chalcedony) with variable moganite content (up to ca. 48 wt%), (3) an inner layer of terminated hyaline quartz crystals. The textures of the various SiO2 phases and their trace element content (Al, Li, B, Ti, Ga, Ge, As), as well as the presence of mineral inclusions (i.e., Fe-oxides and sulfates), is the result of physicochemical fuctuations of SiO2-bearing fuids. Positive correlation between Al and Li, low Al/Li ratio, and low Ti in hyaline quartz points to low-temperature hydrothermal environment. Local enrichment of B and As in chalcedony-rich layers are attributed to pH fuctuations. Analysis of the FT-IR spectra in the principal OH-stretching region (2750–3750 cm−1) shows that the silanol and molecular water signals are directly proportional. Strikingly, combined Raman and FT-IR spectroscopy on the chalcedonic bands reveals an anticorrelation between the moganite content and total water (SiOH+ molH2O) signal. The moganite content is compatible with magmatic-hydrothermal sulfate/alkaline fuids at a temperature of 100–200 °C, whereas the boron-rich chalcedony can be favored by neutral/acidic conditions. The fnal Bambauer quartz growth lamellae testifes diluted SiO 2-bearing solutions at lower temperature. These fndings suggest a genetic scenario dominated by pH fuctuations in the circulating hydrothermal fuid
      50  36
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Application of micro-FTIR imaging in the Earth sciences

    In this paper we describe recent applications of micro-infrared imaging in the Earth sciences. We address, in particular, the use of Fourier-transform infrared (FTIR) spectroscopy in characterizing the zoning and speciation of H and C in a variety of geological materials, including microporous minerals, nominally anhydrous volcanic minerals (NAMs), and crystal inclusions. These investigations show that use of the modern techniques of FTIR imaging enables detection of the zoning of volatile species across the studied samples, and possible configuration changes of structurally-bound carbon molecular species (e.g., CO2 vs CO3) during crystal growth. Such features, which are not accessible with other micro-analytical techniques, may provide information about the physicochemical properties which act as constraints in the genesis of the samples, and important information about the evolution of the geological system. Tests performed with focal-plane-array detectors (FPA) show that resolution close to the diffraction limit can be achieved if the amounts of the target molecules in the sample are substantially different. We also point out the possibility of using FTIR imaging for investigations under non-ambient conditions.
      285  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Real-time quantitative detection of styrene in atmosphere in presence of other volatile-organic compounds using a portable device

    Exposure to styrene is a major safety concern in the fibreglass processing industry. This compound is classified by the International Agency for Research on Cancer as a possible human carcinogen. Several types of analytical equipment exist for detecting volatile organic compounds (VOCs) in the atmosphere; however, most of them operate ex-situ or do not provide easy discrimination between different molecules. This work introduces an improved and portable method based on FTIR spectroscopy to analyse toxic gaseous substances in working sites down to a concentration of less than 4 ppm. Styrene and a combination of VOCs typically associated with it in industrial processes, such as acetone, ethanol, xylene and isopropanol, have been used to calibrate and test the methodology. The results demonstrate that the technique offers the possibility to discriminate between different gaseous compounds in the atmosphere with a high degree of confidence and obtain very accurate quantitative information on their concentration, down to the ppm level, even when different VOCs are present in a mixture.
      46  893
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    High-Temperature Evolution of Point Defect Equilibria in Hydrous Forsterite Synthesized at 1100 C and up to 4 GPa

    Water distribution in the deep Earth represents one of the most important topics in the field of geodynamics due to its large impact on the physical and chemical properties of the Earth’s mantle, such as electrical conductivity, seismic anisotropy, di usion, and rheology. In this study, we synthesized hydrous forsterite at 1100 C and up to 4 GPa with either a piston-cylinder or multianvil apparatus. As a starting material, we used synthetic forsterite, unbu ered by SiO2, obtained by thermo-mechanical activation of talc and magnesium carbonate hydroxide. Hydration was carried out using liquid H2O as hydrogen source. Samples were polycrystalline in an e ort to distribute H2O throughout the sample both rapidly and homogeneously. Using the Paterson calibration, we observed total water content concentrations ranging between 100 and 500 ppm wt H2O. Multiple absorption bands are found in the frequency range between 3400 and 3650 cm􀀀1, identifying at least seven peaks in all samples. Vibrational bands were centered at 3476, 3535, 3550, 3566, 3578, 3605, and 3612 cm􀀀1, in good agreement with experimental studies conducted on both hydrous forsterite and single crystals of olivine. The stronger OH stretching peaks can be attributed to vibrational modes associated with the hydrogarnet defect 4Hx Si in which four protons occupy a vacant tetrahedral site. None of the OH bands observed are found at frequencies associated with hydrogen occupying vacant octahedral sites. High-temperature FTIR spectroscopy was used to evaluate the evolution of IR spectra as a function of temperature, up to 500 C. The complete reversibility of peak absorption vs. temperature in the OH stretching region confirms that no water loss occurred during heating. We observe an overall a decrease in total absorption with increasing temperature, and a prominent decrease in the relative intensities of the higher frequency bands (>3600 cm􀀀1) with respect to lower frequency bands. We have assigned a series of equilibrium expressions based on the variation of relative peak areas with temperature and find that enthalpies of these processes range between 0.047–0.068 eV (4.5–6.5 kJ/mol), very low in comparison to activation energies observed for electrical conduction in hydrous olivine. Major changes in the vibrational spectrum are expected to be related to configurational changes of the same fully protonated hydrogarnet defect species. However, the complexity of the FTIR spectra may also be related to partially protonated defects, such as the associate defect 3H0Si + H i generated by a dissociation reaction of the hydrogarnet species.
      138  30