Dipartimento di Scienze della Terra, Università di Siena, Italy
7 results
Filters
Settings
The search returned 7 results
Now showing 1 - 7 of 7
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , First studies of probabilistic seismic hazard assessment in the volcanic region of Mt. Etna (southern Italy) by means of macroseismic intensities
(2008); ; ; ; Results of probabilistic seismic hazard assessment (PSHA), in terms of macroseismic intensity applied to the Mt. Etna region, are presented. PSHA has been performed using a numerical procedure based on the extensive use of local macroseismic information, as an alternative to the usual Cornell-McGuire methods. The large amount of intensity data available for this area - coming from the Italian intensity database DBMI04 for the regional earthquakes, and from the Etna catalogue for the ‘local’ events - has provided fairly exhaustive seismic site histories (i.e. the data set of macroseismic observations available for a given locality) to estimate the seismic hazard for 402 localities on the volcano. In order to improve the completeness of the site catalogue when historical information is missing, observed intensity data have been integrated with values calculated from epicentral information obtained by using an attenuation law specific for the Etna region. Using a probability distribution considering the completeness of the input database and the uncertainty of intensity data, the hazard in terms of maximum intensity (Iexp) characterised by a 10% probability of exceedance in an exposure time of 50 years, has been computed. The highest values ( Iexp = IX or X) are found in the south-eastern flank of Mt. Etna while the rest of the volcano is exposed to a lower hazard (Iexp = VIII). Despite the low energy (M≤4.8) compared with that of the large regional earthquakes affecting the area (6.6≤M≤7.4), the local events strongly influence the pattern of the hazard in the eastern sector of Mt. Etna, representing a significant, and sole, source of hazard when a shorter exposure time (e.g. 30 years) is considered.288 40 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Radio Echo Sounding (RES) investigations at Talos Dome (East Antarctica): bedrock topography and ice thickness
Radio echo sounding measurements were collected during two Antarctic expeditions to determine the ice thickness and the sub-glacial morphology of Talos Dome in the region around 72°48'S; 159°06'E (about 6400 km2) on the edge of the East Antarctic plateau adjacent to Victoria Land in the western Ross Sea sector. The increasing interest in this region is due to the fact that in this area the ice accumulation is higher than in other sites in East Antarctica. Because of this, Talos Dome could be a new site for a project of a deep ice core drilling to obtain information on climate changes near the coast of Antarctica. In this frame, the knowledge of the bedrock topography is of great importance to choose the best location for the drilling site. In this paper, airborne radio echo sounding results from two Antarctic expeditions (1997 and 1999) are presented. Bedrock topography in bi- and three-dimensions for the Talos Dome region are discussed.29330 660 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Recognizing the Italian zones most prone to next large earthquakes: possible approaches and present chances
(1997-10); ; ; ; Mantovani, E.; Dipartimento di Scienze della Terra, Università di Siena, ItalyThe defense from earthquakes in Italy would be considerably favoured by knowing where the next strong shocks will most probably occur. However, to obtain this information a well-defined and widely accepted method is not yet available. This work discusses the approaches so far proposed and tries to estimate the relative chances of providing reliable indications on this problem. Particular attention focusses on the methodology based on the concept of «strain migration».132 154 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Finite element modelling of the recent- present deformation patter in the Calabrian arc and surrounding regions
(1997-08); ; ; ;Albarello, D.; Dipartimento di Scienze della Terra, Università di Siena, ItalyMantovani, E.; Dipartimento di Scienze della Terra, Università di Siena, ItalyAn attempt is made to quantify the implications of the hypothesis that the recent-present deformation pattem in the Calabrian arc and the adjacent African margin is mainly determined by horizontal tectonic forces in- duced by the relative convergence of the confining blocks (Africa and Adriatic)- Modelling of present-day tec- tonic processes is carried out by means of a 2D finite element scheme involving elastic shells in a piane stl-ess approximation- On the assumption that tectonic processes are strongly influenced by the presencc of major di,- continuitie", the model includes zones whcre most deformations can concentl-ate Convcrgent and divcrgcnt boundaries are simulated by narrow belts having elastic parameters lower than those in the surrounding regions, transform boundaries are reproduced by orthotl-opic elements, Kinematic boundary conditions are im- po,ed to simulatc the relative convergence between Africa and the Adriatic, Numerical experimcnts show that this convergence causes the lateral escape of crustal wedgcs in the Calabrian arc and the adjacent African mar- gin (Sjcily). The resulting microplate kinematics can account for the complex distribution of compressional, tensional and transcurrent deformations actually observed.158 433 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Rheological profiles in the Central- Eastern Mediterranean
(1997-08); ; ; ;Viti, M.; Dipartimento di Scienze della Terra, Università di Siena, ItalyAlbarello, D.; Dipartimento di Scienze della Terra, Università di Siena, ItalySeismological investigations have provided an estimate of the gross structnral features of the crust/upper mantle system in the Mediterranean area. However, this information is only representative of the short-term me- chanical behaviour of rocks and cannot help us to understand slow deformations and related tectonic processes on the geological time scale. In this work strength envelopes for several major structural provinces of the Mediterranean area have been tentatively derived from seismological stratification and heat flow data, on the assumption of constant and uniforrn strain rate (10-16 S-1), wet rocks and conductive geotherm. It is also shown how the uncertainties in the reconstruction of thermal profiles can influence the main rheological prop- erties of the lithosphere, as thickness and total strength. The thickest (50-70 km) and strongest mechanical lithospheres correspond to the coldest zones (with heat flow lower than or equal to 50 mW m-2), i.e., the Io- nian and Levantine mesozoic basins, the Adriatic and Eurasian foreland zones and NW Greece. Heat flows larger than 65 mW m-2, generally observed in extensional zones (Tyrrhenian, Sicily Channel, Northern Aegean, Macedonia and Western Turkey), are mostly related to mechanical lithospheres thinner than 20 km. The characteristics of strength envelopes, and in particular the presence of soft layers in the crust, suggest a reasonable interpretation of some large-scale features which characterize the tectonic evolution of the Central- Eastem Mediterranean.179 591 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Plate convergence, crustal delamination, extrusion tectonics and minimization of shortening work as main controlling factors of the recent Mediterranean deformation pattern
(1997-06); ; ; ; It is argued that the time-space distribution of major post middle Miocene deformation events in the Central-Eastern Mediterranean region, deduced from the relevant literature, can be coherently explained as a consequence of the convergence between the Africa/Arabia and Eurasia blocks. This plate convergence has mainly been accommodated by the consumption of the thinnest parts of the Northern African (Ionian and Levantine basins) and peri-Adriatic margins. During each evolutionary phase the space distribution of trench zones is controlled by the basic physical requirement of minimizing the work of horizontal forces, induced by plate convergence, against the resisting forces, i.e., the cohesion of the upper brittle crustal layer and the buoyancy forces at the consuming boundaries. The significant changes of tectonic styles which determined the transition from one phase to the next, like those which occurred around the Messinian and the late Pliocene-early Pleistocene, were determined by the suture of consuming boundaries. When such an event occurs, the system must activate alternative consuming processes to accommodate the convergence of the major confining blocks. The observed deformations in the study area suggest that this tectonic reorganization mostly developed by the lateral extrusion of crustal wedges away from the sutured borders. This mechanism allowed the translation of maximum horizontal stresses from the locked collisional fronts to the zones where consumable lithosphere was still present, in order to activate the next consuming processes. The extensional episodes which led to the formation of basins and troughs in the Tyrrhenian and Aegean zones are interpreted as secondary effects of the outward escape of crustal wedges, like those which occurred in response to longitudinal compressional regimes in the Apennines and Aegean regions.312 1144 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Tentative list of major deformation events in the Central-Eastern Mediterranean region since the middle Miocene
(1997-06); ; ; ; Babbucci, D.; Dipartimento di Scienze della Terra, Università di Siena, ItalyA list of major constraints to impose on evolutionary reconstructions of the Central-Eastern Mediterranean region for the middle Miocene period to the Present is proposed. Each constraint is constituted by a tentative description of the deformation and related tectonic regime which affected major active zones during each evolutionary phase. This information has been derived from the analysis of the available observations in the various branches of Earth Sciences, trying to select clearly recognized deformations, possibly supported by independent observations. The list here reported has been used to constrain the evolutionary reconstruction proposed by Mantovani et al.(1997).175 382
