Skip to main content
The search returned 1 result
Now showing 1 - 1 of 1
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Ultrasonic velocities, acoustic emission characteristics and crack damage of basalt and granite

    (2006) ; ; ;
    Stanchits, S.; Department 3.2, Geo Forschungs Zentrum Potsdam, Telegrafenberg D420, 14473, Potsdam,
    ;
    Vinciguerra, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    Acoustic emissions (AE), compressional (P), shear (S) wave velocities, and volumetric strain of Etna basalt and Aue granite were measured simultaneously during triaxial compression tests. Deformation-induced AE activity and velocity changes were monitored using twelve P-wave sensors and eight orthogonally polarized S-wave piezoelectric sensors; volumetric strain was measured using two pairs of orthogonal strain gages glued directly to the rock surface. P-wave velocity in basalt is about 3 km/s at atmospheric pressure, but increases by > 50% when the hydrostatic pressure is increased to 120 MPa. In granite samples initialP-wave velocity is 5 km/s and increases with pressure by<20%. The pressure-induced changes of elastic wave speed indicate dominantly compliant low-aspect ratio pores in both materials, in addition Etna basalt also contains high-aspect ratio voids. In triaxial loading, stress-induced anisotropy of Pwave velocities was significantly higher for basalt than for granite, with vertical velocity components being faster than horizontal velocities. However, with increasing axial load, horizontal velocities show a small increase for basalt but a significant decrease for granite. Using first motion polarity we determinedAE source types generated during triaxial loading of the samples. With increasing differential stressAEactivity in granite and basalt increased with a significant contribution of tensile events. Close to failure the relative contribution of tensile events and horizontal wave velocities decreased significantly. A concomitant increase of doublecouple events indicating shear, suggests shear cracks linking previously formed tensile cracks.
      236  33