Istituto di Geoscienze e Georisorse, CNR, Pisa, Italy
5 results
Filters
Settings
The search returned 5 results
Now showing 1 - 5 of 5
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Lateglacial to Holocene trace element record (Ba, Mg, Sr) from Corchia Cave (Apuan Alps, central Italy): paleoenvironmental implications
In this study, Mg/Ca, Sr/Ca and Ba/Ca ratios in a Lateglacial to Holocene stalagmite (CC26) from Corchia Cave (central Italy) are compared with stable isotope data to define palaeohydrological changes. For most of the record, the trace element ratios show small absolute variability but similar patterns, which are also consistent with stable isotope variations. Higher trace element-to-calcium values are interpreted as responses to decreasing moisture, inducing changes in the residence time of percolation, producing prior calcite precipitation and/or variations in the hydrological routing. Statistically meaningful levels of covariability were determined using anomalies of Mg/Ca, d18O and d13C. Combining these three time series into a single ‘palaeomoisture-trend’ parameter, we highlight several events of reduced moisture (ca. 8.9–8.4, 6.2, 4.2, 3.1 and 2.0 ka), a humid period between ca. 7.9 and 8.3 ka and other shorter-term wet events at ca. 5.8, 5.3 and 3.7 ka. Most of these events can be correlated with climate changes inferred from other regional studies. For both extremities of the record (i.e. before ca. 12.4 ka and after ca. 0.5 ka) Mg/Ca and Sr/Ca are anti-correlated and show the greatest amplitude of values, a likely explanation for which involves aragonite and/or gypsum precipitation (the latter derived from pyrite oxidation) above the CC26 drip point.160 23 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Fluid circulation in the upper brittle crust: Thickness distribution, hydraulic transmissivity fluid inclusion and isotopic data of veins hosted in the Oligocene sandstones of the Macigno Formation in southern Tuscany, Italy
(2010-10-08); ; ; ; Mazzarini, F.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Pisa, Pisa, ItaliaWe present structural analysis, fluid inclusion data on calcite and quartz, and isotopic composition of calcite forming veins occurring in the upper crustal level and hosted in Oligocene sandstone in southern Tuscany (Italy). The veins have been analysed in two sites few kilometres apart, along well-exposed coastal cliffs and in an abandoned quarry. These two sites were at a different depths at the time of the vein formation with a Δh ~ 100 m. Structural analysis of veins provided estimations of stress ratio (Φ = (σ2 − σ3)/(σ1 − σ3)), driving stress ratio (R′ = (Pf − σ3)/(σ1 − σ3)) and fluid overpressure (ΔPo = Pf − σ3) at the time of vein formation. The estimated ΔPo is in the range of 42–103 MPa, Φ = 0.24 and R′ = 0.45, indicating that fluid pressure was higher than the intermediate principal stress at the time of veins formation. The veins' thickness (t) shows a clear power-law distribution (D = 1.8835 and R2 = 0.9762) in the lowermost site (coast) and a negative exponential distribution (a = 0.6943 and R2 = 0.9921) in the uppermost site (abandoned quarry). The vein thickness distributions have been used to compute the average transmissivity of the veins in the two sites. The computed transmissivity for the vein formation is ~ 10−4 m2 s−1, with higher values attained by the veins having negative exponential thickness distribution. Fluid inclusions studies highlighted that in both calcite and quartz, water-rich inclusions, with salinities of 2.2–4.3 wt.% NaCl equiv., and methane-rich inclusions were coevally trapped during fluid un-mixing processes. Thermogenic origin, from thermal maturation of organic matter present in the Macigno Formation, is proposed for methane. Whereas, the similarity between the δ18O (from 14.9 to 17.4‰) and δ13C (from −0.4 to −2.4‰) data of representative calcite veins and the isotopic composition (δ18O: 16.1‰, δ13C: −1.0‰) of host-rock carbonate component, indicates that the fluid which formed calcite was in isotopic equilibrium with the carbonates present in the Oligocene sandstones. The calculated pressure–temperature conditions during the formation of these inclusions are prevalently within the 40–145 MPa and 160–260 °C ranges. The highest pressure values approximate the lithostatic pressure (~ 120 MPa) computed from geological data and are coherent with a geothermal gradient ranges of 35–45 °C/km. Whereas, the lower pressure values are comparable with hydrostatic pressure conditions. The pressure range indicated by fluid inclusion data is also comparable with the fluid pressure estimated from structural analysis. The considerable pressure range can be related to pressure cycling between lithostatic and hydrostatic conditions as a consequence of fault-valve actions and rock fracturing with subsequent pressure recover due to self-sealing process.168 26 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , 40Ar–39Ar dating of volcanogenic products from the AND-2A core (ANDRILL Southern McMurdo Sound Project, Antarctica): correlations with the Erebus Volcanic Province and implications for the age model of the core
(2010-05); ; ; ; The AND-2A drillcore (Antarctic Drilling Program—ANDRILL) was successfully completed in late 2007 on the Antarctic continental margin (Southern McMurdo Sound, Ross Sea) with the aim of tracking ice proximal to shallow marine environmental fluctuations and to document the 20-Ma evolution of the Erebus Volcanic Province. Lava clasts and tephra layers from the AND-2A drillcore were investigated from a petrographic and stratigraphic point of view and analyzed by the 40Ar–39Ar laser technique in order to constrain the age model of the core and to gain information on the style and nature of sediment deposition in the Victoria Land Basin since Early Miocene. Ten out of 17 samples yielded statistically robust 40Ar–39Ar ages, indicating that the AND-2A drillcore recovered ≤230 m of Middle Miocene (∼128–358 m below sea floor, ∼11.5–16.0 Ma) and >780 m of Early Miocene (∼358–1093 m below sea floor, ∼16.0–20.1 Ma). Results also highlight a nearly continuous stratigraphic record from at least 358 m below sea floor down hole, characterized by a mean sedimentation rate of ∼19 cm/ka, possible oscillations of no more than a few hundreds of ka and a break within ∼17.5–18.1 Ma. Comparison with available data from volcanic deposits on land, suggests that volcanic rocks within the AND-2A core were supplied from the south, possibly with source areas closer to the drill site for the upper core levels, and from 358 m below sea floor down hole, with the “proto-Mount Morning” as the main source.222 19 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Adventive hydrothermal circulation on Stromboli volcano (Aeolian Islands, Italy) revealed by geophysical and geochemical approaches: Implications for general fluid flow models on volcanoes
(2010); ; ; ; On March 15th 2007 a paroxysmal explosion occurred at the Stromboli volcano. This event generated a large amount of products,mostly lithic blocks, someofwhich impacted the ground as far as down to 200 m a.s.l., about 1.5 kmfaraway fromthe active vents. Two days after the explosion, a newvapouremissionwas discovered on the north-eastern flank of the volcanic edifice, at 560 m a.s.l., just above the area called “Nel Cannestrà”. This new vapour emission was due to a block impact. In order to investigate the block impact area to understand the appearance of the vapour emission, we conducted on May 2008 a multidisciplinary study involving Electrical Resistivity Tomography (ERT), Ground Penetrating Radar (GPR), Self-Potential (SP), CO2 soil diffuse degassing and soil temperature surveys. This complementary data set revealed the presence of an anomalous conductive body, probably related to a shallow hydrothermal level, at about 10–15 m depth, more or less parallel to the topography. It is the first time that such a hydrothermal fluid flow,with a temperature close to thewater boiling point (76 °C) has been evidenced at Stromboli at this low elevation on the flank of the edifice. The ERT results suggest a possible link between (1) the main central hydrothermal system of Stromboli, located just above the plumbing system feeding the active vents, with a maximum of subsurface soil temperature close to 90 °C and limited by the NeoStromboli summit crater boundary and (2) the investigated area of Nel Cannestrà, at ~500 m a.s.l., a buried eruptive fissure active 9 ka ago. In parallel, SP and CO2 soil diffuse degassingmeasurements suggest in this sector at slightly lower elevation fromthe block impact crater a magmatic and hydrothermal fluid rising system along the N41° regional fault. A complementary ERT profile, on May 2009, carried out from the NeoStromboli crater boundary downto the block impact crater displayed a flank fluid flowapparently connected to a deeper system. The concept of shallow hydrothermal level have been compared to similar ERT results recently obtained onMount Etna and La Fossa cone of Vulcano. This information needs to be taken into account in general fluid flow models on volcanoes. In particular, peripheral thermal waters (as those bordering the northeastern coast of Stromboli) could be contaminated by hydrothermal and magmatic fluids coming from regional faults but also from the summit.539 30 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The upper lithostratigraphic unit of ANDRILL AND-2A core (Southern McMurdo Sound, Antarctica): Local Pleistocene volcanic sources, paleoenvironmental implications and subsidence in the southern Victoria Land Basin
(2009-11); ; ; ; We report results from the study of the uppermost 37 m of the Southern McMurdo Sound (SMS) AND-2A drill core, corresponding to the lithostratigraphic unit 1 (LSU 1), the most volcanogenic unit within the core. We present data on the age, composition, volcanological and depositional features of the volcanic sedimentary and tephra deposits of LSU 1 and discuss their source, mechanisms of emplacement and environment of deposition. Sedimentary features and compositional data indicate shallow water sedimentation for the whole of LSU 1. Most of LSU 1 deposits are a mixture of near primary volcanic material with minor exotic clasts derived from the Paleozoic crystalline basement rocks. Among volcanic materials, glassy particles are the most abundant. They were produced by mildly explosive basaltic eruptions occurring in subaerial and subaqueous environments. The Dailey Islands group, 13 km south-southwest of the SMS drill-site, has been identified as a possible source for the volcanics on the basis of similarity in composition and age. 40Ar–39Ar laser step-heating analyses on a lava sample from Juergens Island yields an age of 775 ± 22 ka. Yet because of the minimal reworking features of vitriclasts, preservation of fragile structures in volcaniclastic sediments and evidence for volcanic seamounts to the north of the Dailey Islands, it is likely that some of the material originated also from vents close to the drill-site. Evidence for local volcanic sources and for deposition of sediments in a shallow marine environment provides indications about the local paleogeography and implications for the subsidence history of the southern Victoria Land Basin from Pleistocene to Recent.138 31
