Please use this identifier to cite or link to this item: http://hdl.handle.net/2122/1578
AuthorsCosentino, P.* 
Luzio, D.* 
TitleTomographic pseudo-inversion of resistivity profiles
Issue DateOct-1997
Series/Report no.40/5
URIhttp://hdl.handle.net/2122/1578
Keywordspseudosection
pseudo-slices
resistivity profile
IP profile
pseudo-depth section
pseudo-inversion
back-projection
electric tomography
Subject Classification04. Solid Earth::04.02. Exploration geophysics::04.02.99. General or miscellaneous 
AbstractA new approach to construct vertical and/or horizontal pseudosections starting from sets of resistivity (and/or IP) data is presented. In principle it consists in the division of the subsoil into a number of pixels (discretization), arranged in a 3D halfspace. The resistivity of each pixel is then obtained by a back-projection of the set of acquired experimental data, that is by arranging a set of convolutions using 3D filters. The coefficients of the filters are calculated, depending on the geometry of the electrode array used, on the basis of a mask reproducing the «influence coefficients» of all the pixels. The aim of these representations is to match the shape of the investigated structures as close as possible, so that, even if it can be considered a fast arrangement of the experimental data rather than a real inversion, it can be a useful tool in interpretation, at least as a simple preliminary sketch. This method is discussed, focussing on some critical choices regarding the construction of the filters and the use of smoothing factors; some applications on synthetic data calculated on simple models of buried resistive spheres are also presented.
Appears in Collections:Annals of Geophysics

Files in This Item:
File Description SizeFormat 
14 cosentino.pdf5.11 MBAdobe PDFView/Open
Show full item record

Page view(s)

69
Last Week
0
Last month
1
checked on Aug 23, 2017

Download(s)

120
checked on Aug 23, 2017

Google ScholarTM

Check