Di Prima, Sergio

Nel 2018 è stato avviato il progetto FOCUS - Fiber Optic Cable Use For Seafloor Studies Of Earthquake - coordinato da Marc-André Gutscher del Laboratoire Géosciences Océan dell’Università di Brest, in Francia. Questo progetto indaga la sismicità e la struttura crostale del Mar Ionio attraverso l’analisi e l’interpretazione di dati raccolti da strumentazione sottomarina e da reti di monitoraggio disponibili o appositamente installate nelle zone di costa. In tale contesto, l’Osservatorio Nazionale Terremoti (ONT) e l’Osservatorio Etneo (OE), entrambe Sezioni dell’Istituto Nazionale di Geofisica e Vulcanologia (INGV), e il Laboratorio di Sismologia dell'Università della Calabria (UniCal), hanno contribuito al progetto con l’installazione di una rete sismica temporanea lungo la costa ionica calabro-siciliana a integrazione della rete permanente presente nell’area dello Stretto di Messina. La rete temporanea, costituita da 13 stazioni, ha acquisito dal mese di dicembre 2021 al mese di giugno 2023. Nel gennaio 2022, i partner internazionali del progetto FOCUS hanno installato una rete temporanea di sismometri OBS e sensori di pressione per fondali marini. La grande quantità di dati raccolta e la loro integrazione, consentirà di migliorare il monitoraggio sismico e le conoscenze relative alla struttura terrestre dell’area con particolare attenzione alle strutture sismogenetiche con un dettaglio mai raggiunto fino a ora. Tutte le istituzioni coinvolte in FOCUS collaborano per l’acquisizione e l’elaborazione dei dati, l’imaging dell’interno della Terra attraverso l’utilizzo di tecniche avanzate, l’interpretazione e la modellazione dei dati. Il presente lavoro descrive la progettazione, la realizzazione e la gestione della rete temporanea a terra definita FXland, fornendo indicazioni relative sul suo generale funzionamento e sulle caratteristiche del dataset acquisito.

In the frame of FocusX2 project INGV (Osservatorio Nazionale Terremoti and Osservatorio Etneo) and UniCal (Laboratorio di Sismologia) are deploying, from the end of 2021 to January 2023 a temporary seismic network for an active/passive seismological experiment to record regional and global seismicity in the Ionian Sea. The goal of this experiment is to improve the detection of seismicity in the Ionian Sea area and the accuracy of the locations; to better define the crustal structure of the region and find patterns related to fault systems. The seismicity in the area is possibly the result of two types of tectonic activity at different depths: a gently NW dipping subduction interface of the Calabrian subduction zone, and the strike-slip fault systems in the Ionian Sea, well expressed in the morpho-bathymetry and observed in previous seismic profiles. The deployment of 13 temporary land stations, FocusX temporary land (network code 1J) https://doi.org/10.13127/SD/O5QWM6WJCD along the coasts of eastern Sicily and SW Calabria, is going to complement the permanent networks (network codes IV, MN and IY); in the same period OBS stations are deployed at sea: FocusX temporary OBS-network (network code XH). The land stations are equipped with two different type of digitizers: Reftek 130 (12), and SaraSL06 (2); and with three different type of velocimeters: Trillium 120C (10), Le 5s (2) and ss08 60s (2). Continuous data are transmitted in real time at the INGV Rome acquisition system, used in the seismic surveillance, archived and distributed in EIDA https://eida.ingv.it/it/. In the deployment period 23rd December 2021 - 9th May 2022 regional seismicity (area between Lat 36.5-38.2 Lon 14.5-16.0) include 390 events located by the INGV seismic surveillance system, two of them with magnitude larger than 4.0 as well as 56 teleseismic earthquakes with magnitude larger than magnitude 6.0, two of them larger than 7.0. The two local events with M>4.0 and some of their aftershocks, were analyzed by the analysts of the Italian Seismic Bulletin including all the stations of the FXland 1J network.

We describe the first dense real-time urban seismic–accelerometric network in Italy, named OSU-CT, located in the historic center of Catania. The city lies in the region with the greatest danger, vulnerability, and earthquake exposure in the entire Italian territory. OSU-CT was planned and realized within the project called EWAS “an Early WArning System for cultural heritage”, aimed at the rapid assessment of earthquake-induced damage and the testing of an on-site earthquake early warning system. OSU-CT is mainly based on low-cost instrumentation realized ad hoc by using cutting-edge technologies and digital MEMS (micro-electro-mechanical systems) triaxial accelerometers with excellent resolution and low noise. Twenty of the forty scheduled stations have already been set up on the ground floor of significant historic public buildings. In order to assess the performance of an earthquake early warning (EEW) on-site system, we also installed wide-band velocimeters (ETL3D/5s) in three edifices chosen as test sites, which will be instrumented for a structural health monitoring (SHM). In addition to several laboratory and field validation tests on the developed instruments, an effective operational test of OSU-CT was the Mw 4.3 earthquake occurring on 23 December 2021, 16 km west, south-west of Catania. Peak ground accelerations (4.956 gal to 39.360 gal) recorded by the network allowed obtaining a first urban shakemap and determining a reliable distribution of ground motion in the historical center of the city, useful for the vulnerability studies of the historical edifices.

The Istituto Nazionale di Geofisica e Vulcanologia (INGV) is an Italian research institution with focus on earth sciences. Moreover, the INGV is the operational center for seismic surveillance and earthquake monitoring in Italy and is a part of the civil protection system as a center of expertise on seismic, volcanic, and tsunami risks.INGV operates the Italian National Seismic Network and other networks at national scale and is a primary node of the European Integrated Data Archive for archiving and distributing strong‐motion and weak‐motion seismic recordings. In the control room in Rome, INGV staff performs seismic surveillance and tsunami warning services; in Catania and Naples, the control rooms are devoted to volcanic surveillance. Volcano monitoring includes locating earthquakes in the regions around the Sicilian (Etna, Eolian Islands, and Pantelleria) and the Campanian (Vesuvius, Campi Fregrei, and Ischia) active volcanoes. The tsunami warning is based on earthquake location and magnitude (M) evaluation for moderate to large events in the Mediterranean region and also around the world. The technologists of the institute tuned the data acquisition system to accomplish, in near real time, automatic earthquake detection, hypocenter and magnitude determination, and evaluation of several seismological products (e.g., moment tensors and ShakeMaps). Database archiving of all parametric results is closely linked to the existing procedures of the INGV seismic surveillance environment and surveillance procedures. Earthquake information is routinely revised by the analysts of the Italian seismic bulletin. INGV provides earthquake information to the Department of Civil Protection (Dipartimento di Protezione Civile) to the scientific community and to the public through the web and social media. We aim at illustrating different aspects of earthquake monitoring at INGV: (1) network operations; (2) organizational structure and the hardware and software used; and (3) communication, including recent developments and planned improvements.

A real-time urban seismic network for seismic and structural health monitoring is being installed in the city of Catania (Sicily, Italy). The 27 monitoring stations, specifically designed and assembled, equipped with a low-noise 3-axial MEMS accelerometer, are located in 23 high exposure and vulnerability buildings. In this paper we present the characteristics of the monitoring station and of the network. In case of strong seismic events, the system will provide shake maps to the emergency management centre, and will allow to assess the health conditions of the monitored buildings. The network is conceived to be further expandable over the whole historical city centre of the city of Catania.

In the present paper we describe the on-land field operations integrated in the TOMO-ETNA experiment carried out in June-November 2014 at Mt. Etna volcano and surrounding areas. This terrestrial campaign consists in the deployment of 90 short-period portable three-component seismic stations, 17 broadband seismometers and the coordination with 133 permanent seismic station belonging to Italy’s Istituto Nazionale di Geofisica e Vulcanologia (INGV). This temporary seismic network recorded active and passive seismic sources. Active seismic sources were generated by an array of air-guns mounted in the Spanish oceanographic vessel “Sarmiento de Gamboa” with a power capacity of up to 5200 cubic inches. In total more than 26,000 shots were fired and more than 450 local and regional earthquakes were recorded. We describe the whole technical procedure followed to guarantee the success of this complex seismic experiment. We started with the description of the location of the potential safety places to deploy the portable network and the products derived from this search (a large document including full characterization of the sites, owners and indication of how to arrive to them). A full technical description of the seismometers and seismic sources is presented. We show how the portable seismic network was deployed, maintained and recovered in different stages. The large international collaboration of this experiment is reflected in the participation of more than 75 researchers, technicians and students from different institutions and countries in the on-land activities. The main objectives of the experiment were achieved with great success.

Seismology and geodesy are generally seen as the most reliable diagnostic tools for monitoring highly active or erupting volcanoes, like Mt. Etna. From the early 1980’s, seismic activity was monitored at Mt. Etna (volcano) by a permanent seismic network, progressively improved in the following years. This network has been considerably enhanced since 2005 by 24-bit digital stations equipped with broad-band (40s) sensors. Today, thanks to a configuration of 33 broad-band and 12 short-period stations, we have a good coverage of the volcanic area as well as a high quality of the collected data. In the framework of the VULCAMED project a workgroup of Istituto Nazionale di Geofisica e Vulcanologia has taken on the task of developing the seismic monitoring system, through the installation of other seismic stations. The choice of optimal sites must be clearly made through a careful analysis of the geometry of the existing seismic network. In this paper, we applied the Seismic Network Evaluation through Simulation in order to evaluate the performance of the Etna Seismic Network before and after the addition of the stations in the candidate sites. The main advantage of the adopted method is that we can evaluate the improvement of the network before the actual installation of the stations. Our analysis has permitted to identify some critical issues of the current permanent seismic network related to the lack of stations in the southern sector of the volcano, which is nevertheless affected by a number of seismogenic structures. We have showed that the addition of stations at the candidate sites would greatly extend the coverage of the network to the south by significantly reducing the errors in the hypocenter parameters estimation.

In 1966, the Istituto Internazionale di Vulcanologia (I.I.V.), gave the go ahead to the ambitious project of setting up a seismic network in the southern Tyrrhenian Sea, an area of extraordinary geophysical interest, which until then was not covered by seismic monitoring. At the time, there were single seismic stations on the rest of the italian peninsula. These were inside universities, public and private bodies and at the numerous observatories of the Istituto Nazionale di Geofisica (founded in 1936 by Antonino Lo Surdo and becoming independent of the Consiglio Nazionale delle Ricerche (C.N.R,. in 1945) and still used mechanical seismographs, with masses weighing from 80 up to 1300 Kg. On the Aeolian Islands instead, electromagnetic seismometers were employed from the start. The experimental network, planned in the Willmore laboratories at Edinburgh and tested in the Aeolian Islands over a two-year period, represented the starting point for the Permanent Seismic Network (PSN) of the Southern Tyrrhenian. After the experience of the Laboratorio Internazionale per le Ricerche Vulcanologiche (L.I.R.V. - C.N.R.), of the Istituto di Vulcanologia of the University of Catania, the independent I.I.V. - C.N.R., together with the observatory, was launched in 1969. In the course of the seventies, every island of the Aeolian archipelago, was equipped with at least a seismic station and the 3 sensor systems (triaxial systems) began to become widely used. In the eighties, the “Sismologia Eolie” project was started, aimed at a further develop and update the seismic net. With the wide use of magnetic tape recording, the instrumental data stored could be more readily transported on suitable drums to the main centre in Catania for analysis. Here, Research Units were established in order to prepare the way for enhanced interaction between technical staff and research groups. The instrumental geophysical investigations, progressively extended and in a permanente form to Eastern Sicily and particular around Etna. From the nineties, operations room in Catania was fully active, working 24/24, and ensuring the seismic and volcanic surveillance of Etna, Stromboli and Vulcano. The Geophysical Observatory of Lipari and the main centre of the Institute in Catania, were merged in 2001 into the new Istituto Nazionale di Geofisica e Vulcanologia (INGV) and the network of the Aeolian Islands became an integral part of the Permanent Seismic Network (PSN) of Eastern Sicily and Southern Calabria. Special prominence will be given in the course of this historical reconstruction to the evolution of instrumental seismology, thanks to forty years of continuous input, indispensable for the understanding of the seismogenetic processes in the area, this still represents the chief undertaking of the geophysical observatory on Lipari, whose important scientific but also social role must be acknowledged in the growing interaction between research and civil protection.

Cruise STR06 on R/V Urania was performed in the framework of the ”INGV - DPC V2 - Monitoring and research activity at Stromboli and Panarea - Unit V2/03”, and resulted as a joint initiative between CNR (IAMC, Napoli and ISMAR, Bologna), INGV (Roma2, Osservatorio Vesuviano, Catania, Gibilmanna-CNT), University of Firenze and DPC, aiming to produce a seismic tomography of the Stromboli volcano, South Eastern Tyrrhenian Sea [Fig.1], and have insights into its 2-D structure and magma chambers. Cruise work plan was designed to extend at sea the existing Seismographic Network, complemented by several mobile stations, and to generate seismic shots by air-gun tuned array. 10 OBS were deployed around Stromboli, along the NE, SE and SW flanks of the volcano, according to (a) morphobathymetric analysis of available and newly produced DTMs, (b) modeling and (c) optimal lineaments with on-land recording stations. Seismic shots along radial and circle lines were obtained by a 4 GI-GUN 105+105 C.I. tuned array, while the absolute shot time was recorded at the resolution of ms. A request for ship time of R/V Uraniawas presented by IAMC, and a period of 7 days, including 2 day of transit was assigned to the project by CNR and scheduled for late November 2006. Cruise STR06 started in Naples 2006-11-27 and ended in Naples 2006-12-06. This paper reports the shipboard activities during the cruise STR06 on R/V Urania and some preliminary results regarding also the onshore activities carried out in order to perform the Stromboli geophysical experiment. A description of the ship, equipment and their usage is given thereinafter, along with details of the general settings, performances and some scientific and technical results.