Lucchi, Federico

The peninsular and insular Italy are punctuated by Quaternary volcanoes and their rocks constitute an important aliquot of the Italian Quaternary sedimentary successions. Also away from volcanoes itself, volcanic ash layers are a common and frequent feature of the Quaternary records, which provide us with potential relevant stratigraphic and chronological markers at service of a wide array of the Quaternary science issues. In this paper, a broad representation of the Italian volcanological community has joined to provide an updated comprehensive state of art of the Italian Quaternary volcanism. The eruptive history, style and dynamics and, in some cases, the hazard assessment of about thirty Quaternary volcanoes, from the northernmost Mt. Amiata, in Tuscany, to the southernmost Pantelleria, in Sicily Channel, are here reviewed in the light of the substantial improving of the conceptual models, methodological approaches and the overall knowledge made in the last decades in the volcanological field study. We hope that the prest review can represent an useful and agile document summarising the knowledege on the Italian volcanism at the service of the Quaternary community operating in central Mediterranean area.

The sedimentological, lithological and textural characteristics of the Brown Tuffs (BT) pyroclastic deposits, combined with their grain-size, componentry and geochemical glass compositions, are here investigated to obtain information on the transport and depositional mechanisms of the corresponding pyroclastic density currents (PDCs). The BT are widespread reddish-brown to grey, ash-rich pyroclastic deposits generated by pulsating hydromagmatic explosive activity from the La Fossa Caldera on Vulcano island during the c. 80–6 ka time-stratigraphic interval, and then distributed on most of the Aeolian Islands and Capo Milazzo peninsula (Sicily) and in the Tyrrhenian and Adriatic Sea regions. Near the source area on Vulcano, the BT are characterised by alternating massive and planar to cross stratified lithofacies that result from the stepwise, repeating aggradation of discrete PDC pulses. This alternance is regulated by either fluid escape or granular flow depositional regimes at high clast concentration or grain by grain traction deposition in thewaning diluted stages of the PDCs. Most of the BT on Vulcano showintermittently stratified and massive ash deposits resulting froma pervasive post-depositional disruption of the primary structures. This is induced by upward fluid expulsion associated with dissipation of pore pressure between layers at different grain size (fine to coarse ash) and porosity, as outlined by distinctive upwards bends and pillar-type escape structures through the fluid-filled cracks and rupture points. Massive BT deposits with a faint colour and grain-size banding are widely recognised on Lipari, the nearby island of Vulcano. Based on the presence, at the base of BT depositional units, of cm-thick amalgamation bands containing pumice lapilli, scoria and lithic clasts ripped-up and embedded from the loose underlying pyroclastic units, they are interpreted as deposited by ash-rich PDCs laterally spreading from La Fossa Caldera and moving to Lipari.During their motion to Lipari these currents (likely) crossed a narrow and shallow sea-water inlet which did not stop their advancement but influenced the grain size distribution of those spreading on the Lipari mainland. In this paper, the mechanism of clast erosion and incorporation is outlined across the whole island of Lipari by means of field study, grain-size, and geochemical glass analyses on the different components of the mixed basal bands of the BT. This suggests that the BT PDCs maintained enough flow power as to erode the substratum, hence likely impacting the territory, over a distance up to at least 16–17 km from the volcanic source. Evidence that the BT PDCs exerted a high shear-stress over the loose substratum is also provided by undulated, recumbent flame and rip-up structures at the base of some depositional units in southern and central Lipari. In order to form such bed granular instabilities between the BT and the underlying deposits we calculate that the currents had at least a shear velocity of ca. 2 m s−1 and a shear stress in the range of 1‐4.5 kPa. These results add new insights on the large-scale hazard at the Aeolian Islands and shed new lights on the widespread transport and depositional dynamics of ash flows spreading over the sea and reaching nearby islands, and their interactions with the substratum and the pre-depositional topography. The sedimentological, lithological and textural characteristics of the Brown Tuffs (BT) pyroclastic deposits, combined with their grain-size, componentry and geochemical glass compositions, are here investigated to obtain information on the transport and depositional mechanisms of the corresponding pyroclastic density currents (PDCs). The BT are widespread reddish-brown to grey, ash-rich pyroclastic deposits generated by pulsating hydromagmatic explosive activity from the La Fossa Caldera on Vulcano island during the c. 80–6 ka time-stratigraphic interval, and then distributed on most of the Aeolian Islands and Capo Milazzo peninsula (Sicily) and in the Tyrrhenian and Adriatic Sea regions. Near the source area on Vulcano, the BT are characterised by alternating massive and planar to cross stratified lithofacies that result from the stepwise, repeating aggradation of discrete PDC pulses. This alternance is regulated by either fluid escape or granular flow depositional regimes at high clast concentration or grain by grain traction deposition in thewaning diluted stages of the PDCs. Most of the BT on Vulcano showintermittently stratified and massive ash deposits resulting froma pervasive post-depositional disruption of the primary structures. This is induced by upward fluid expulsion associated with dissipation of pore pressure between layers at different grain size (fine to coarse ash) and porosity, as outlined by distinctive upwards bends and pillar-type escape structures through the fluid-filled cracks and rupture points. Massive BT deposits with a faint colour and grain-size banding are widely recognised on Lipari, the nearby island of Vulcano. Based on the presence, at the base of BT depositional units, of cm-thick amalgamation bands containing pumice lapilli, scoria and lithic clasts ripped-up and embedded from the loose underlying pyroclastic units, they are interpreted as deposited by ash-rich PDCs laterally spreading from La Fossa Caldera and moving to Lipari. During their motion to Lipari these currents (likely) crossed a narrow and shallow sea-water inlet which did not stop their advancement but influenced the grain size distribution of those spreading on the Lipari mainland. In this paper, the mechanism of clast erosion and incorporation is outlined across the whole island of Lipari by means of field study, grain-size, and geochemical glass analyses on the different components of the mixed basal bands of the BT. This suggests that the BT PDCs maintained enough flow power as to erode the substratum, hence likely impacting the territory, over a distance up to at least 16–17 km from the volcanic source. Evidence that the BT PDCs exerted a high shear-stress over the loose substratum is also provided by undulated, recumbent flame and rip-up structures at the base of some depositional units in southern and central Lipari. In order to form such bed granular instabilities between the BT and the underlying deposits we calculate that the currents had at least a shear velocity of ca. 2 m s−1 and a shear stress in the range of 1‐4.5 kPa. These results add new insights on. the large-scale hazard at the Aeolian Islands and shed new lights on the widespread transport and depositional dynamics of ash flows spreading over the sea and reaching nearby islands, and their interactions with the substratum and the pre-depositional topography.

Understanding the relationship cause/effect between tectonic earthquakes and volcanic eruptions is a striking topic in Earth Sciences. Volcanoes erupt with variable reaction times as a consequence of the impact of seismic waves (i.e. dynamic stress) and changes in the stress field (i.e. static stress). In 2012, three large (Mw ≥ 7.3) subduction earthquakes struck Central America within a period of 10 weeks; subsequently, some volcanoes in the region erupted a few days after, while others took months or even years to erupt. Here, we show that these three earthquakes contributed to the increase in the number of volcanic eruptions during the 7 years that followed these seismic events. We found that only those volcanoes that were already in a critical state of unrest eventually erupted, which indicates that the earthquakes only prompted the eruptions. Therefore, we recommend the permanent monitoring of active volcanoes to reveal which are more susceptible to culminate into eruption in the aftermath of the next large-magnitude earthquake hits a region.

The youngest (last 1500 years) volcanic eruptions of Lipari, within the Aeolian Archipelago, produced the prominent pumice cone of Monte Pilato and the obsidian lava flows of Rocche Rosse and Forgia Vecchia, concentrated in the north-eastern sector of the island as well as highly dispersed white-coloured, fine-grained tephra layers of rhyolitic composition in terrestrial and marine settings on the regional scale. Here we describe in detail the stratigraphy of pyroclastic successions and lava flows erupted by different vents - Monte Pilato, Forgia Vecchia, Lami, and Rocche Rosse - combining field observations, sedimentological characteristics of the tephra deposits, and major and trace element compositions of the volcanic glass. All the pyroclastic materials consist of aphyric pumice lapilli and ash with a largely homogeneous rhyolitic composition. The Monte Pilato and Forgia Vecchia deposits primarily consist of highly vesicular pumice fragments and subordinate obsidian clasts, whilst Rocche Rosse and Lami are characterized by moderately vesicular juvenile fragments with a more significant fraction of obsidian. The Lami tephra also contains peculiar pumice clasts with a fibrous texture and breadcrust bombs. Stratigraphic relationships, and paleomagnetic and 14C ages of the lava and pyroclastic deposits are combined with the archaeological information and historical reports, enabling us to provide an accurate chrono-stratigraphic framework for the youngest eruptions of Lipari. Following the 8th century CE eruption of Monte Pilato, which produced a pumice cone and a obsidian lava flow, activity resumed in the second half of 13th century CE with the explosive eruption of Forgia Vecchia that culminated in the emission of a bilobate obsidian lava flow. This eruption was shortly followed by the explosive eruptions of Lami and Rocche Rosse, the latter concluded with the emission of the widely renowned obsidian lava flow. By integrating stratigraphy and geochemistry of tephra deposits with a new chronological scheme, our work facilitates the refinement of proximal-to-distal correlation of Lipari's rhyolitic tephra in continental marine environments of the central Mediterranean area in the last 1500 years. A fine-grained, rhyolitic ash found on Stromboli (~40 km NE from Lipari) has an origin from the Monte Pilato and thus, constrains tephra dispersion towards the NE. Very similar ash beds dispersed southwards and interlayered within the near-source deposits of La Fossa, Vulcano island (~10 km from Lipari) exhibit features that are consistent with the younger activities of the Rocche Rosse eruption. A possible link between previously identified rhyolitic ash layers identified in marine cores of the Ionian Sea and the Forgia Vecchia eruption are postulated, although the age and textural characteristics of these distal tephra are not univocal in indicating a correlation to either Monte Pilato or Forgia Vecchia.

This study presents the first hydrogeochemical model of the hydrothermal systems of Turrialba and Irazú volcanoes in central Costa Rica, manifested as thermal springs, summit crater lakes, and fumarolic degassing at both volcanoes. Our period of observations (2007-2012) coincides with the pre- and early syn-phreatic eruption stages of Turrialba volcano that resumed volcanic unrest since 2004, after almost 140 years of quiescence. Peculiarly, the generally stable Irazú crater lake dropped its level during this reawakening of Turrialba. The isotopic composition of discharged fluids reveals their Caribbean meteoric origin. Four groups of thermal springs drain the northern flanks of Turrialba and Irazú volcanoes into two main rivers. Río Sucio (i.e. “dirty river”) is a major rock remover on the North flank of Irazú, mainly fed by the San Cayetano spring group. Instead, one group of thermal springs discharges towards the south of Irazú. All thermal spring waters are of SO4-type (i.e. steam heated waters), none of the springs has, however, a common hydrothermal end-member. A water mass budget for thermal springs results in an estimated total output flux of 187 ± 37 L/s, with 100 ± 20 L/s accounted for by the San Cayetano springs. Thermal energy release is estimated at 110 ± 22 MW (83.9 ± 16.8 MW by San Cayetano), whereas the total rock mass removal rate by chemical leaching is ~3,000 m3/y (~2,400 m3/y by San Cayetano-Río Sucio). Despite Irazú being the currently less active volcano, it is a highly efficient rock remover, which, on the long term can have effects on the stability of the volcanic edifice with potentially hazardous consequences (e.g. flank collapse, landslides, phreatic eruptions). Moreover, the vapor output flux from the Turrialba fumaroles after the onset of phreatic eruptions on 5 January 2010 showed an increase of at least ~260 L/s above pre-eruptive background fumarolic vapor fluxes. This extra vapor loss implies that the drying of the summit hydrothermal system of Turrialba could tap deeper than previously thought, and could explain the coincidental disappearance of Irazú’s crater lake in April 2010.

Among the active volcanoes worldwide, Somma-Vesuvius is one with the highest volcanic risk as the surrounding areas are highly populated. Somma-Vesuvius is quiescent since 1944, but geological and historical records reveal a frequent violent explosive activity in the last 4000 years, representing a severe risk for the ~700000 inhabitants currently living in the area having a high probability for being impacted by pyroclastic density currents (“red zone”) and more than one million people who can be potentially affected by tephra fallout. This study aims to analyze the distribution and grain-size of tephra fallout deposits from several Somma-Vesuvius eruptions of different styles, ranging from Violent Strombolian to sub-Plinian and Plinian, for characterizing the associated magmatic fragmentation through the assessment of their total grain-size distribution (TGSD). Chronologically, we focus on the Avellino (4365 BP) and Pompeii (A.D. 79) Plinian eruptions, the Pollena (A.D. 472) sub-Plinian eruption, and the 1906 and 1944 Violent Strombolian eruptions. The related TGSDs were estimated by means of the Voronoi tessellation method, which requires a suitable number of local grain-size distributions and estimation of the area of minimum tephra loading (zero-line contour). However, field-derived TGSDs can be biased towards the coarse and fine grain-size populations due to the typical paucity of available field outcrops of fallout deposits. To encompass this issue, we performed a sensitivity study on the assumption behind TGSD reconstructions and described TGSDs through analytical grain-size distributions that best fit the field TGSDs. Our main objective is a more robust estimation of the TGSDs associated with the different eruptive styles, which is crucial, together with the other eruption source parameters, for robustly predicting tephra loading and airborne ash dispersal of future eruptions at Somma-Vesuvius.

Katla is one of the most active volcanoes in Iceland and is characterised by persistent seismicity. It is partly covered by the Mýrdalsjökull glacier and its historic activity is dominated by phreatomagmatic eruptions within the caldera associated with catastrophic glacial floods. In July 2011 a sudden jökulhlaup was released from the glacier, associated with tremor, elevated seismicity inside the caldera and a new cluster of seismicity on the south flank. This was likely caused by a hydrothermal or magmatic event, possibly a small subglacial eruption. Similar unrests occurred in 1955 and 1999. We have identified changes of the seismicity pattern coinciding with the 2011 unrest, suggesting a modification in the volcanic system. It may be speculated that if the persistent seismicity at Katla is an indication of a pressurized magma system ready to erupt, small events like those of 1955, 1999 and 2011 may trigger larger eruptions in the future. We have also conducted a pilot study of the geology of the southern flank, where the new seismicity is recorded, and identified sources for flank eruptions in the recent eruptive history of Katla. These include rhyolitic domes and surtseyan craters. Therefore, a wide range of volcanic processes have to be taken into account as possible source for the new seismicity and volcanic hazard.

The Neostromboli volcanic succession is characterized by packages of lava flow units and scoria beds erupted from the summit of the Stromboli volcano, and by scoria cones and lava flows poured out from lateral vents and fissures. Available radiometric ages constrain Neostromboli activity in the 14–4 ka BP age window, but the chronological relations of central vs. peripheral activity are still poorly understood. Furthermore, radiometric and palaeomagnetic ages for some of the peripheral eruptions are strikingly inconsistent. Here we report on the palaeomagnetic dating of thirty-four sites from Neostromboli products. Seventeen are new palaeomagnetic directions, while additional seventeen ages are recalculated - using published directions by Speranza et al. (2008) - with the recent SHA.DIF.14K palaeo-secular variation (PSV) field model. We show that the beginning of Neostromboli succession could be much younger than the commonly accepted ≈14 ka onset, providing our oldest data an age of ≈9 ka. The improved geochronological resolution allowed by palaeomagnetic dating sug- gests that the early stages of the Neostromboli activity occurred at 9–8 ka BP and were characterized by summit lava flow units blanketing both the SW and northern volcano flanks; after ≈7.5 ka lateral eruptions from periph- eral cones and fissures became dominant. We suggest that the intense flank activity enabled magma-water inter- action thus yielding explosive activity and repeated collapse events, leading to the Sciara del Fuoco formation. Our work confirms that PSV analysis of Holocene volcanics may yield eruption chronology definition with an ac- curacy unlikely to be achieved with other radiometric techniques.

The analysis of multibeam bathymetry, seismic profiles, ROV dive and seafloor sampling, integrated with stratigraphic and geological data derived from subaerial field studies, provides information on the multi-stage formation and evolution of La Fossa Caldera at the active volcanic system of Vulcano (Aeolian Islands). The caldera is mostly subaerial and delimited by well-defined rims associated to three different collapse events occurred at about 80, 48–24, and 13–8 ka, respectively. The NE part of the caldera presently lies below the sea-level and is delimited by two partially degraded rim segments, encompassing a depressed and eroded area of approximately 2 km2. We present here further morphological and petrochemical evidence linking the subaerial caldera rims to its submarine counterparts. Particularly, one of the submarine rims can be directly correlated with the subaerial eastern caldera border related to the intermediate (48–24 ka) collapse event. The other submarine rim cannot be directly linked to any subaerial caldera rim, because of the emplacement of the Vulcanello lava platform during the last 2 millennia that interrupts the caldera border. However, morphological interpretation and the trachyte composition of dredged lavas allow us to associate this submarine rim with the younger (13–8 ka) caldera collapse event that truncated the trachyte-rhyolite Monte Lentia dome complex in the NW sector of Vulcano. The diachronicity of the different collapse events forming the La Fossa Caldera can also explain the morpho-structural mismatch of some hundreds of meters between the two submarine caldera rims. A small part of this offset could be also accounted by tectonic displacement along NE–SW trending lineaments breaching and dismantling the submarine portion of the caldera. A network of active erosive gullies, whose headwall arrive up to the coast, is in fact responsible of the marked marine retrogressive erosion affecting the NE part of the caldera, where remnants of intra-caldera volcanic activity are still evident. Submarine morphological features associated to the entrance of subaerial lava flow units into the sea are presented, particularly related to the construction of the La Fossa Cone and Vulcanello. More generally, this study demonstrates the utility of integrated marine and subaerial studies to unravel the volcano-tectonic evolution of active insular volcanoes.

Volcanic islands represent the later stage of an early submarine volcanic activity and show different morphologies re fl ecting the geometry of shallow plumbing systems, magma output rate, gravitational instability, and erosive phases. Two end ‐ member morphologies may be recognized: (a) rift ‐ like elongated edi fi ces and ‘ stellate ’ volcanoes and (b) cone ‐ shaped, central ‐ type volcanoes. While the evolution from early conical shapes to stellate shapes is relatively well known, the reverse is less constrained, commonly lacking geophysical and geological data to support it. We present magnetic forward and 3 ‐ D inverse models of the volcanic island of Salina (244 ‐ 15 ka; Aeolian Arc, Southern Tyrrhenian Sea) to characterize its shallow plumbing system. The detected magnetic sources are interpreted as the crystallized portions of dykes and vertical conduits. The dykes mainly characterize the offshore of Salina Island, whereas subcircular conduits are located onshore. The results show that the early, mainly submarine phases of Salina concentrated along dykes following weakness zones of tectonic signi fi cance. As the volcanism proceeded, the subaerial activity focused on two main cone ‐ shaped stratovolcanoes (Monte Fossa delle Felci and Monte dei Porri). The intersections among dykes and the progressive loading of volcanic products during the early growth of Salina are responsible for the transition from an early fi ssural basaltic activity to a later, basaltic to a last, more evolved central ‐ type volcanism. We conclude that intrusions along pre ‐ existing tectonic structures, dyke intersections, and loading processes related to the formation of a volcanic pile regulate the morphology and structural evolution of volcanic islands from the early, submarine phase to the later subaerial activity.