Dipteris Università di Genova
8 results
Filters
Settings
The search returned 8 results
Now showing 1 - 8 of 8
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , P wave seismic velocity and Vp/Vs ratio beneath the Italian peninsula from local earthquake tomography
(2009); ; ; ;Scafidi, D.; Dipteris Università di GenovaSolarino, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, ItaliaWe investigate the P wave velocity structure and the Vp/Vs ratio beneath the Italian peninsula down to 100 and 60 km depth respectively by seismic travel time tomography. We invert data provided by the International Seismological Centre (ISC) (1997–2005), making use of some alternative strategies for the travel time approach in a well constrained and worldwide adopted code (SIMULPS). Resolution for the different layers is discussed and sensitivity analyses are performed through test inversions to explore the resolution characteristics of the model at different spatial scales. The resulting tomographic images provide a detailed sketch of the P wave anomalies, clearly showing, among the other features, the shape of the Ivrea body in the Western Alps, the upwelling of the oceanic crust in the Ligurian Sea and the slab under the Calabrian arc. They are less informative for the Vp/Vs ratio. Nevertheless, some features are very interesting and deserve further investigation like the anomalous decrease of the Vp/Vs ratio under the Ligurian Sea or the variations of the Vp/Vs ratio calculated in the first 10 km depth of the Apenninic region with respect to the lower values of the Alpine region at the same depth. The tomographic cross sections reveal a continuous superposition of two kinds of crusts (transitional over Adriatic) all along the peninsula but do not show any slab, intended as a clear, vertical downgoing high velocity material in either the northern or central Apennines.243 38 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Inferences on active faults at the Southern Alps–Liguria basin junction from accurate analysis of low energy seismicity
(2009); ; ; ; Turino, C.; Dipteris Università di GenovaSeismotectonic studies concern themselves with understanding the distribution of earthquakes in space, time, size and style. Therefore, the better these parameters are known, the most correct the association of any seismic event with the faulting structure that caused it will result. The use of accurate location methods is especially required when dealing with very complex areas, where several faulting systems or relatively small seismogenic structures exist. In fact, even though routinely determined epicentres are capable of revealing the rough picture of the seismicity, they are not suitable for studies of the fine structure of the causative fault, as their location uncertainties are often larger than the source dimension itself. In this work the probabilistic approach of the “Non Linear Localization” has been used to compute precise locations for earthquakes occurred in the last twenty years nearby the Saorge–Taggia line, a complex fault system situated in Western Liguria, close to the border between Italy and France. Together with the Breil– Sospel–Monaco and the Peille–Laghet faults, this line is responsible for the seismic activity of the area. The seismotectonic study is completed through a local tomographic study and the analysis of the focal mechanisms computed for an enlarged area. The results show that the seismicity associated with this fault system is confined within the first 10 km depth. Many clusters of seismic events are identified along the Saorge–Taggia line. The existence of a not previously mapped branch perpendicular to the Saorge–Taggia line is also recognized. Although its position may suggest it to be the continuation of the Breil–Sospel–Monaco fault system towards NE, our finding would rather suggest no association with the fault. The overall results confirm the complexity of the area; in particular the hypothesis that the Saorge–Taggia system may represent the eastward limit of a subalpine crustal block comprised within the Nice Arc, the named fault and a thrust front which is supposed to be located 20 km offshore find a confirm in the shallow depth of the seismic events. In addition we propose that the western limit of the block, located along the Nice arc, could be instead shifted where the Peille–Laghet fault lays.250 37 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Struttura crostale e subcrostale della penisola italiana dalla interpretazione congiunta di immagini tomografiche e profile DSS
(2008-10); ; ; ;Solarino, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, ItaliaScafidi, D.; Dipteris Università di GenovaQuesto studio rappresenta la conclusione di una serie di analisi precedentemente proposte e volte alla migliore comprensione della struttura profonda della penisola italiana. Tale serie, iniziata con il confronto tra la sismicità crostale e le interpretazioni dei profili DSS (Cassinis e Solarino, 2004; Cassinis e Solarino, 2006), si era successivamente estesa alla struttura litosferica (Solarino e Cassinis, 2005; Solarino e Cassinis, 2007). In ambedue le occasioni lo studio era stato condotto avendo cura di utilizzare le più recenti elaborazioni dei profili e selezionando gli ipocentri con criteri molto restrittivi. Nello spirito dei precedenti lavori, anche in questo caso si è eseguita una analisi congiunta di dati ottenuti con diverse tecniche sovrapponendo alle interpretazioni già esistenti le informazioni ricavate da un recente studio tomografico (Scafidi et al., 2008) effettuato con la tecnica della inversione di terremoti locali (Thurber, 1983).268 219 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A new deep picture of the Alps-Apennines system derived from seismological data
(2007-10); ; ; ; Scafidi, D.; Dipteris Università di GenovaThe diverse studies carried out with geophysical and geodetic data in the last decades greatly improved the knowledge of the Alps-Apennines system. However, most of these studies were limited to portions of the system or to the shallow structures, and for these reasons reconstruction of the tectonic setting for a larger area and for the deeper layers is still open to different approaches and interpretations; in particular, very little is known about the deeper conjunction between the two chains. One of the most powerful tools to investigate the deeper part of an earth’s volume is seismic tomography. In fact, not only seismic tomography may reach depths that are far beyond those of many other methodologies, but it can provide information on very large areas (up to the entire earth) with a unique level of details. In this study, we applied diverse tomographic techniques to perform a multi-approach investigation on the crustal structure of the North-Western part of Italy, in particular to obtain the under surface velocity structure and the attenuation distribution. An accurate analysis of seismicity and focal mechanisms complemented the study. In the light of our new analysis of velocity tomography, attenuation tomography and focal mechanisms a more in deep interpretation of the characteristics of the Alps-Apennine system is now possible.286 271 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismotectonic analysis of a complex fault system in Italy: the "Garfagnana-North" (Northern Tuscany) line
(2007); ; ; ; We present the results obtained combining different techniques to determine the seismotectonic character of the Garfagnana region (northern Tuscany). There, the existence of a rather complex fault system is acknowledged and somewhat mapped, but apart from the geological evidences, very little is known about its extension with depth and the regime. The seismic potential of the system is also well known. The area was characterized, in the past, by destructive earthquakes; in particular a major event (Ms=6.4) struck the Lunigiana-Garfagnana area in September 1920, but many others have been reported. Therefore, the seismicity is under constant monitoring by the national seismic network (RSNC – National Central Seismic Network) and a pool of local stations, belonging to a regional network (RSLG – Regional Seimic network of Lunigiana and Garfagnana). These additional stations account for the lower magnitude seismicity. Such a concentration of seismic stations, and the consequent availability of several seismograms, makes likely to record and localize earthquakes down to a very low magnitude threshold (inferior to Ml = 2.0) with extremely narrow hypocentral parameter errors . Making use of the resulting databases, several analyses were conducted to determine the shape, size, extension with depth of the fault and the associated seismicity. The methodology consists in seismic tomography (1D and 3D velocity models), precise location algorithms NonLinLoc and HypoDD (very constrained and reliable locations) and computation of focal mechanisms (fault orientation and source), all combined with the constraints provided by the geology. The main findings of the study are that the concentration of the recent seismic activity is close to the likely location of the most relevant historical events. In particular the earthquakes are distributed along a plane in the range 0 – 20 km depth dipping 30° NE. All focal mechanisms show a transtensive character.259 620 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , An Improved Method for the Recognition of Seismic Families: Application to the Garfagnana-Lunigiana Area, Italy
(2005-10); ; ; ;Ferretti, G.; Dipteris Università di GenovaMassa, M.; Dipteris Università di GenovaWith the aim to find a more objective way to detect seismic families, we applied a series of successive steps to constrain the results of a waveform similarity analysis. The evaluation of similarity was carried out on the waveforms recorded in the period 1999–2003 by the stations operating in the Garfagnana area, located in northern Tuscany (Italy). The algorithm is based on the cross-correlation technique applied in a process that overcomes the limit of one order of magnitude between events to be compared through a bridging technique. In practice, if two couples of events (A, B) and (B, C), each exceeding the correlation threshold, share a common quake (B), then all three events are attributed to the same family even if the match between A and C is below a value chosen as a reference for similarity. To avoid any subjective choice of threshold for cross-correlation values, the results from the computation algorithm are submitted to a routine that gives increasing reliability to them if they are confirmed by the three components of the seismogram and if the number of families detected by each station is confirmed by more recordings. This latter constraint is made possible by the geometry of the recording network, with interdistances between stations of the order of 40–50 km. The process finally leads to the recognition of 27 families detected and confirmed by, on average, 3 stations that represent 40% of the recording capabilities. Since the performances of the recording network have been very odd in the past, especially in the early years of operation, the reliability of the detection is much higher, as in most cases the stations that detected the families were the only ones to be effectively recording. The methodology proved to be more efficient than other methods applied in the past; moreover, the results could be probably improved even more if, instead of doing a one-run process, it would be borne as a trial-and-error approach.193 49 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Superposition of different stress orientations in the western sector of the Northern Apennines
(2005); ; ; ;Eva, E.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, ItaliaFerretti, G.; Dipteris Università di GenovaPrevious studies of the stress regime in the northern Apennines report compression in the outer sector and extension in the inner sector. In this study we focus on the relationships between the two regimes and, by making use of 54 focal mechanism solutions, we try to shed some more light on a tectonic setting that appears more complex than the previous models. The focal mechanisms, computed using the first onset technique, are inverted for stress parameters. The method applied requires subdividing the volume to be investigated into homogeneous sectors: to comply with the complexity of the area under study, we included depth as a parameter for sub-zoning. Our results show that the shallow regime (0–10 km of depth) is transtensive even in the sector previously reported to be compressive. In fact, at a shallow depth, very few thrust focal solutions lie in a spatially limited sector in the eastern part of the area under study. Just below 10 km in depth, the stress regime converts to transpressional: stress axes are approximately inverted. Deeper than 45 km, thrust solutions are found. They are not numerous enough to perform an inversion but indicate the existence of a compressional regime at depth. It is worth noting that a gap of seismicity is observed in the layer 30–45 km.194 24 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Seismicity of Garfagnana-Lunigiana (Tuscany, Italy) as recorded by a network of semi-broad-band instruments
(2002); ; ; ;Solarino, S.; Dipteris Università di GenovaFerretti, G.; Dipteris Università di GenovaEight seismic stations equipped with 5-second sensors have recently been installed in the Lunigiana-Garfagnana area to monitor activity in this sector of the Northern Apennines shaken by the 5.0Md earthquake of October 1995. The stations (RSLG network) represent an eastern branch of the RSNI (Regional Seismic network of Northwestern Italy) managed by Dipteris, Universita’ di Genova. The installation of this dense network allowed the operators to improve the magnitude detection level, providing information about the seismicity of the area down to magnitude 1.0. Several analyses have been carried out to evaluate the performance of the network and the reliability of the computed locations. It seems that the epicentral location for events occurring inside the network is already constrained using 8–10 P+S phases, but usage of more readings ensures reliability of depth and the reduction of location errors. Though not conclusive, as the network has only been fully operating for two years, a preliminary study carried out on a selected dataset of high-quality locations confirmed that the seismicity of the Garfagnana- Lunigiana is characterised by a low-to-medium magnitude level and it is subdivided into two bands, a superficial one about 30–35 km thick and the second below 50 km. This distribution, confirmed by other studies carried out in the past, reflects the complex structure of this area where two tectonic plates (European and Adriatic) meet.10234 31
