Skip to main content
The search returned 3 results
Now showing 1 - 3 of 3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Constraining the early stage of the post-orogenic extensional tectonics in central Italy: New evidence from a long sediment core from the tectonically active L’Aquila Basin

    (Geological Society of America:PO Box 9140:Boulder, CO 80301:(800)472-1988, (303)357-1004, EMAIL: rfreeman@geosociety.org, INTERNET: http://www.geosociety.org, Fax: (303)357-1070, 2025-09-23)
    Mondati, G
    ;
    ; ;
    Arcangeli, P
    ;
    The central Apennines are among the most seismically active sectors of the central Mediterranean region, as testified by the recent sequence of Mw >6 earthquakes (L’Aquila Mw 6.3, 6 April 2009; Amatrice Mw 6.2, 24 August 2016), that struck the region. Although many recent studies have focused on the recent history of the active and seismogenic faults, due to the poor understanding on the age of the fault-bounded intermontane basins and on the early stage of their continental deposition, less is known about the faults’ long-term behavior. To try to fill this knowledge gap, we analyzed a long sediment core (230 m depth, Castelnuovo 1 borehole; CN-1) recovered from the infill of the Plio-Pleistocene tectonically active L’Aquila Basin (Paganica– San Demetrio–Castelnuovo [PSC] Sub-basin) by employing 40Ar/39Ar dating, magnetostratigraphy, multiproxy paleoclimatic data (palynological analyses, pollen temperature index and clumped isotopes), and astrocyclostratigraphy. Combining the results from the CN-1 pollen record, 40Ar/39Ar dating of a tephra (1.77 ± 0.15 Ma), and magnetostratigraphy of the CN-1 sediment core, we can refer the longest normal polarity interval (N3) to the Olduvai subchron, which we use to constrain the CN-1 age model. Moreover, spectral analysis of the CN-1 calcimetry data series shows the presence of 13 obliquity-modulated cycles, resulting in an age of ca. 1490 ka for the top of the core and an age of ca. 2027 ka for its base. This time span encompasses Marine Isotopic Stages (MIS) 50–75. The occurrence of lacustrine ostracod fauna since the lowermost portion of the CN-1 core points to the presence in the PSC Sub-basin, already at 2 Ma, of a well-developed intermontane lake. Both pollen assemblages and clumped isotopes show warm-to-cold climate changes along the CN-1 sediment core, with clumped-isotope–derived temperatures of the lake waters of 15.4 ± 1.6 °C (MIS 53) and 11.5 ± 1.3 °C (MIS 52), whereas temperatures of 21 ± 1.7 °C and 15.6 ± 1.7 °C correspond respectively to MIS 67 and MIS 64. The PSC Sub-basin shows a complex subsurface architecture, with highs and depocenters showing maximum thickness of the lacustrine deposits up to 510–450 m. Considering that the CN-1 age model points to a sedimentation rate of 0.3 mm/yr for the deep lacustrine deposits, the onset of the continental sedimentation in the L’Aquila intermontane basin started at ca. 3.2–3.0 Ma. This post-orogenic extensional domain responsible for the onset and subsequent development of the L’Aquila intermontane basin is still active, representing an archive of ∼3 m.y. of continued crustal extension from one of the most seismically active sectors of the central Mediterranean region.
      3  47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The Cyclostratigraphy Intercomparison Project (CIP): consistency, merits and pitfalls

    Cyclostratigraphy is an important tool for understanding astronomical climate forcing and reading geological time in sedimentary sequences, provided that an imprint of insolation variations caused by Earth’s orbital eccentricity, obliquity and/or precession is preserved (Milankovitch forcing). Numerous stratigraphic and paleoclimate studies have applied cyclostratigraphy, but the robustness of the methodology and its dependence on the investigator have not been systematically evaluated. We developed the Cyclostratigraphy Intercomparison Project (CIP) to assess the robustness of cyclostratigraphic methods using an experimental design of three artificial cyclostratigraphic case studies with known input parameters. Each case study is designed to address specific challenges that are relevant to cyclostratigraphy. Case 1 represents an offshore research vessel environment, as only a drill-core photo and the approximate position of a late Miocene stage boundary are available for analysis. In Case 2, the Pleistocene proxy record displays clear nonlinear cyclical patterns and the interpretation is complicated by the presence of a hiatus. Case 3 represents a Late Devonian proxy record with a low signal-to-noise ratio with no specific theoretical astronomical solution available for this age. Each case was analyzed by a test group of 17-20 participants, with varying experience levels, methodological preferences and dedicated analysis time. During the CIP 2018 meeting in Brussels, Belgium, the ensuing analyses and discussion demonstrated that most participants did not arrive at a perfect solution, which may be partly explained by the limited amount of time spent on the exercises (∼4.5 hours per case). However, in all three cases, the median solution of all submitted analyses accurately approached the correct result and several participants obtained the exact correct answers. Interestingly, systematically better performances were obtained for cases that represented the data type and stratigraphic age that were closest to the individual participants’ experience. This experiment demonstrates that cyclostratigraphy is a powerful tool for deciphering time in sedimentary successions and, importantly, that it is a trainable skill. Finally, we emphasize the importance of an integrated stratigraphic approach and provide flexible guidelines on what good practices in cyclostratigraphy should include. Our case studies provide valuable insight into current common practices in cyclostratigraphy, their potential merits and pitfalls. Our work does not provide a quantitative measure of reliability and uncertainty of cyclostratigraphy, but rather constitutes a starting point for further discussions on how to move the maturing field of cyclostratigraphy forward.
      163  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Assessing the biological reactivity of organic compounds on volcanic ash: implications for human health hazard

    Exposure to volcanic ash is a long-standing health concern for people living near active volcanoes and in distal urban areas. During transport and deposition, ash is subjected to various physicochemical processes that may change its surface composition and, consequently, bioreactivity. One such process is the interaction with anthropogenic pollutants; however, the potential for adsorbed, deleterious organic compounds to directly impact human health is unknown. We use an in vitro bioanalytical approach to screen for the presence of organic compounds of toxicological concern on ash surfaces and assess their biological potency. These compounds include polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzop- dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dlPCBs). Analysis of ash collected in or near urbanised areas at five active volcanoes across the world (Etna, Italy; Fuego, Guatemala; Kelud, Indonesia; Sakurajima, Japan; Tungurahua, Ecuador) using the bioassay inferred the presence of such compounds on all samples. A relatively low response to PCDD/Fs and the absence of a dlPCBs response in the bioassay suggest that the measured activity is dominated by PAHs and PAH-like compounds. This study is the first to demonstrate a biological potency of organic pollutants associated with volcanic ash particles. According to our estimations, they are present in quantities below recommended exposure limits and likely pose a low direct concern for human health.
      205  46